Comments on: CCNA Configuration SIM Question

By: jkkj

jkkj — Sat, 09 May 2015 16:28:28 +0000

kkjkkll

By: testtaker

testtaker — Thu, 07 May 2015 14:09:12 +0000

Guys the commands are ok for the purpose of answering the question but if you are practicing on RIP with this pkt and you wanna have route exchanged you should also configure it on R1-RT same way as you’ve done on R2-RC and then you will notice that routes are still not exhanged. Why?

Because line protocol on the Serial link is down. Why?

Because a clock rate is not set on the DCE side of the cable. Which side is the DCE?

Check it this way: Router#sh controllers
and then configure a clock rate on the right interface. How?

Router(config-if)#clock rate 4000000
Line protocol will go up and everything will work like a charm. Check “sh ip route” to verify.
I hope this helps :)

By: Anonymous

Anonymous — Thu, 07 May 2015 12:22:50 +0000

Hi! there any one willing to send me new CCNA 200-120PT dump? i desperately need it since my exam is coming soon. here is my email tewotv36103@yahoo.com thanks in advance for any of your help!!

By: Agya

Agya — Tue, 05 May 2015 01:33:46 +0000

How do we differentiate between the two passe-words cisco1 and cisco3, I mean is the enable secret password not also a console password? After setting the enable secret password, would the console password not be redundant? In other words, are they both not initiated with the enable command: don’t they both enable the USER EXEC mode?

By: adex

adex — Sat, 02 May 2015 06:47:43 +0000

pls zain I need dumes

By: Anonymous

Anonymous — Fri, 01 May 2015 17:56:26 +0000

Hi there

Can anyone please send me the latest dump of CCNA 200-120? It will be really help for me if you anyone already have taken exam and got the latest dump which not need amyone.

thanks for your help in advance
email: armanlondon@gmail.com

By: christine

christine — Fri, 24 Apr 2015 14:27:07 +0000

Please someone send me the latest 316 Question Dump for CCNA 200-120
my email is isacebu9007@gmail.com

By: polocom

polocom — Sat, 11 Apr 2015 09:40:46 +0000

To student3:
please register your ccna exam online through http://www.pearsonvue.com the pay the fees and get instant location of where byou have to take the exam.you are allow to chose your location

By: student 3

student 3 — Fri, 10 Apr 2015 15:50:31 +0000

please someone tell where i go to do the ccna test for real and i live in London please send me the address and the bus or train that goes their.

my email is abdikaniadawe@gmail.com

By: student 2

student 2 — Fri, 10 Apr 2015 15:48:50 +0000

please someone tell where i go to do the test. i am in london
my email is abdikaniadawe@gmail.com

By: student 1

student 1 — Fri, 10 Apr 2015 15:47:52 +0000

please someone tell where i go to do the test. i am in london

By: ADNAN

ADNAN — Tue, 07 Apr 2015 05:08:05 +0000

gyzz plz send me dumpss!!!!2015

By: AN

AN — Tue, 07 Apr 2015 00:39:42 +0000

Its a layer 2 issue… you need to sync the clock between the serial

By: Anonymous

Anonymous — Sat, 04 Apr 2015 05:11:45 +0000

After the configuration on R2-RC all thing work fine but serial protocol is down can someone tell me why?

By: jj

jj — Sun, 22 Mar 2015 19:28:14 +0000

You don’t see the routes because you are Advertising the networks not learning them on R2-RC. A better command to use is “show ip rip database”; this will show what is being advertised. Using “show ip route” shows what you are learning.

By: Anony

Anony — Thu, 19 Mar 2015 19:05:32 +0000

Please some one reply on the above question soon I have exam to take.

By: Anony

Anony — Thu, 19 Mar 2015 19:04:36 +0000

Does anyone know why ‘sh ip route’ command on R2-RC doesn’t show the ‘RIP’ update with all the above mentioned configuration?

By: Sergio

Sergio — Sun, 08 Mar 2015 19:39:37 +0000

R1-RT is not enabled RIP routing.

By: ALI

ALI — Mon, 02 Mar 2015 09:13:01 +0000

Can you please send me CCNA 200-120 dump and voucher inform. I will be really grateful to you. adnandaudzai@gmail.com

By: bkool

bkool — Thu, 26 Feb 2015 14:35:49 +0000

@NW, if you are config as the answer you are Ok, but you need to config RIPV2 on the router R-RT. After that you can issue “show ip route” on both.

By: NW

NW — Mon, 16 Feb 2015 14:48:22 +0000

I am unsure why we do not check that RIP is advertising the route out. I have completed the lab and typed ‘show ip route’ to see the rip route in there and it was not there. I f i was in the exam i would be thinking i have done it wrong.

By: Helal

Helal — Thu, 12 Feb 2015 19:32:27 +0000

Hi Zain,
Can you please send me CCNA 200-120 dump. I will be really grateful to you.

helalitech@gmail.com

Many thanks

By: sneha

sneha — Wed, 11 Feb 2015 19:24:16 +0000

In the above sim why do we use classful networks when RIP v2 supports classles networks/VLSM

By: Zain

Zain — Sat, 31 Jan 2015 03:42:55 +0000

Pass4sure Latest 316 Q&A CCNA 200-120 dumps available. I already purchased that, if you need email me. zain.cisco@hotmail.com

By: SB

SB — Mon, 26 Jan 2015 21:31:47 +0000

Can anyone tell me , if I use exact networks in RIP V2 configuration, use no auto-summary, will the answer be right?

By: jason

jason — Wed, 21 Jan 2015 21:08:01 +0000

Please Please requesting the latest 200-120 dumps really need it folks please, i am pleading help me
jasoncarrorig@gmail.com

By: AZ

AZ — Tue, 20 Jan 2015 15:26:08 +0000

Latest CCNA 200-120 dumps 316 Questions & Answers including all labs available.
316 question dumps are 100% valid. I already purchased that, If you need, email me
azeemsarwar1@hotmail.com

By: Mary

Mary — Sun, 18 Jan 2015 11:30:48 +0000

Could anyone tell me if I need to include the “no-autosummary” command in this lab? I think it’s more correct, and it’s included in the solution indeed (just check the running-config file and the ripv2 section…) Please, help me!!!!

By: hack

hack — Wed, 07 Jan 2015 10:11:32 +0000

$function displayNumber()
{
alert(12);
}

By: hack

hack — Wed, 07 Jan 2015 10:09:54 +0000

function displayNumber()
{
alert(12);
}

By: ha

ha — Wed, 07 Jan 2015 10:06:29 +0000

hello

By: Saleem

Saleem — Tue, 06 Jan 2015 22:25:18 +0000

Did anyone actually get this on the exam??

By: Nick

Nick — Sat, 03 Jan 2015 20:56:26 +0000

When configuring the router R2-RC I had configured it correctly, but thought I hadn’t because I was not receiving any RIP updates from router R1-RT. I turns out that RIP is not configured on that router, so unless you configure that router as well you won’t see the routing table being updated with remote networks.

By: nvc

nvc — Sat, 27 Dec 2014 22:52:35 +0000

can someone send me Latest CCNA 200-120 dumps please
me email : nvc.ks.net@gmail.com

By: Azeem

Azeem — Sat, 27 Dec 2014 10:49:29 +0000

Latest CCNA 200-120 dumps 316 Questions & Answers available.
316 question dumps are 100% valid. I already purchased that If you needed, share nominal fee.
azeemsarwar1@hotmail.com

By: Alex

Alex — Tue, 16 Dec 2014 14:40:41 +0000

@Isha
http://www.4shared.com/folder/1FM1meZR/CCNA_V5.html

By: Guru

Guru — Mon, 15 Dec 2014 03:42:09 +0000

Hello all,
Rip protocol topic is included in ccna 200-120 exam?
pls i need urgent answer as am preparing to write my CCNA R & S on Wednesday

By: Alex

Alex — Mon, 08 Dec 2014 12:20:12 +0000

http://ccnav5.com/ccna-v5-routing-switching-online-free-courses/

By: bilal

bilal — Sun, 07 Dec 2014 14:33:29 +0000

twlight118@outlook.com

By: Isha

Isha — Mon, 01 Dec 2014 11:21:38 +0000

Hi guys i would like to have the installation file of the new CCNA curriculum. Can you help me please? #Pressing

By: kylie

kylie — Sun, 23 Nov 2014 15:07:26 +0000

i cant ping 198.18.1.1. even the answered file, still not work. please fix the issue. thanks

By: reji

reji — Fri, 21 Nov 2014 06:56:07 +0000

some of the files wont work from exam collection.com… please visit “exam4all” website thanks.. it ll work sure in player 1.1.6… and another info 1.1.7 doesnt work anywhere

By: Asanka

Asanka — Wed, 22 Oct 2014 20:15:37 +0000

Dumps can be downloaded from ‘examcollection’ website. You need VCE player 1.1.6 to run those files. Just google search for VCE player 1.1.6 or 7

By: tuan anh

tuan anh — Wed, 01 Oct 2014 10:01:39 +0000

full video lap sim acl1 acl2 eigrp and dump ccna 120-200 question 314
please share or subscribed
thanks you
https://www.youtube.com/watch?v=Q7cTJsVxebc&list=PLF3JXcGq4iLEYCucsr8acdiUvZ-AF198e&index=1

By: mykada

mykada — Fri, 19 Sep 2014 00:45:11 +0000

ACL1 ACL2 EIGRP DUMP
https://www.youtube.com/watch?v=mzHBPOAWaCY&index=1&list=PLW2Xk7jJ5ZSoFn2G_x0ql_S5AlKvaDaOZ

By: Rahul

Rahul — Tue, 16 Sep 2014 20:10:01 +0000

Hello friends… Go to ccnalearn.cf to know all about ccna / dumps / exam problems / new questions.. etc all for free.
Hope it helps all to learn and clear ccna 200-120 exam. http://www.ccnalearn.cf

By: caxap01

caxap01 — Thu, 21 Aug 2014 10:30:36 +0000

Please send the latest CCNA dummies to me.(caxap01@gmail.com)
really appreciate.thanks

By: Sarah

Sarah — Sun, 22 Jun 2014 05:05:44 +0000

@ Tasnim increment means:
increment of these numbers will not see each others, cuz they will be on different subnet.

16+16 = ?

=32

so the second subnet will begin with 32.
Hope it helpful for you..

By: reema

reema — Sun, 11 May 2014 11:55:30 +0000

how can I test these commands? or how will I know if my password configurations are correct? i was able to test my enable secret, as well as telnet access by the command telnet 209.165.202.158 23 at R2-RC, but I was unable to test it on user exec-mode.. thanks in advance

By: Tasnim

Tasnim — Fri, 09 May 2014 06:52:21 +0000

hello ..can anybody tell me that what is “Increment”???I really need to know…

By: Anonymous

Anonymous — Fri, 25 Apr 2014 18:54:19 +0000

Can anybody answer if it’s right?: It’s not needed to configure no auto-summary for this topology, cause they all are in the C class and router will set the wild card mask automatically to 0.0.0.255 though RIPv2 support VLSM

By: Anonymous

Anonymous — Fri, 18 Apr 2014 08:56:47 +0000

hey guys just need to know something, everytime am doing my CCNA Configuration SIM Question, when i do the command show ip interface brief to view if the IP address and assgned correctly and to see if the serial interface is up, i usually find it as down, in the reall exam am i allowed to configure the clock rate so that my network can be fully fuctional.. tomphony@gmail.com any one with an answer please respond ASAP am writting on the 23rd of April..

By: Talha

Talha — Sat, 12 Apr 2014 06:14:16 +0000

Can any one email me the latest video training of labs i need it on urgent bases at haroon.talha@gmail.com

By: prasath

prasath — Mon, 07 Apr 2014 06:18:18 +0000

its not included in ccna 200-120 no RIP at all dont worry…

By: Muhammad Firdaus Bin Abdul Rahman

Muhammad Firdaus Bin Abdul Rahman — Fri, 04 Apr 2014 08:23:47 +0000

Hi,
Please send the latest CCNA dummies to me.(muhammadfirdaus1346@gmail.com)
really appreciate.thanks

By: Navi

Navi — Sat, 29 Mar 2014 22:21:43 +0000

Exactly my question. I thought RIP is not included in 200-120 syllabus, atleast that’s what cisco website says.

By: brahmanand

brahmanand — Tue, 25 Mar 2014 17:35:38 +0000

Hello all,

Rip protocol topic is included in ccna 200-120 exam?

Is this CCNA Configuration SIM Question had asked in the CCNA 200-120 exam?

Kindly revert

Thanks in Advance

By: James K. Stevens

James K. Stevens — Tue, 04 Feb 2014 14:09:25 +0000

really great

By: Barry

Barry — Sat, 25 Jan 2014 12:13:41 +0000

Need to add no auto summary command in RIP2
Also it is classless hence it the commands in RIP would be :
network 209.165.202.128
network 192.0.2.16
no auto-summary

Thank you.

By: CCNA

CCNA — Sun, 19 Jan 2014 07:46:13 +0000

There’s nothing on the SIM that states configuring the “Clock Rate” or “Rip” on router R1-RT

By: Anonymous

Anonymous — Thu, 16 Jan 2014 08:15:08 +0000

download free latest dumps from
9
t
u
t
.
w
e
b
s
.
c
o
m

By: XeonCide

XeonCide — Fri, 03 Jan 2014 08:04:23 +0000

The downloaded pratice sim, router R1-RT need to configure “clock rate” and “RIP”.

By: bobby

bobby — Wed, 01 Jan 2014 13:34:11 +0000

Oops my bad, it is 2.30 just tired maybe. hihi.

By: bobby

bobby — Wed, 01 Jan 2014 13:30:52 +0000

how R2-RC’s ser 0/0/0 become 2.30 when the increment is 16, shouldn’t it be 192.0.2.31, the last usable ip on this network?

By: S

Mon, 23 Dec 2013 17:40:29 +0000

@9tut……..It is not possible to ping to 192.0.2.17 ,which is on s0/0/1 of R1-Rt…….how can this be fixed…..thanks in advance…….

By: Rafael Lacerda

Rafael Lacerda — Thu, 07 Nov 2013 19:05:03 +0000

the clock is configured on the DTE instead of DCE, and the R1-T1 has no RIPv2.
Great lab for training

By: russ

russ — Wed, 30 Oct 2013 17:01:57 +0000

in actual test do we need to configure the clock rate?

By: Yogi

Yogi — Tue, 29 Oct 2013 08:32:48 +0000

how increment 32

By: Anonymous

Anonymous — Mon, 28 Oct 2013 05:48:04 +0000

download latest dumps from
9
t
u
t
.
c
o
m
x
a
.
c
o
m

By: Anonymous

Anonymous — Fri, 27 Sep 2013 06:23:13 +0000

Passed ccna 640-802 with 947.
VTP,ACL-2 and EIGRP were the simulations.
Thank you,9tut.Really helpful.

By: B/Gen.

B/Gen. — Tue, 24 Sep 2013 08:03:55 +0000

DCE was actually missing Clock rate its the reason i cant communicate with s0/0/1 int

By: B/Gen.

B/Gen. — Tue, 24 Sep 2013 07:30:34 +0000

why can’t I ping the R1-RT interface?

By: Anonymous

Anonymous — Tue, 24 Sep 2013 06:18:43 +0000

download latest dumps from
9 t u t . w e e b l y . c o m

By: aya

aya — Mon, 23 Sep 2013 17:24:55 +0000

configuration here must be from console pc??
and how?
when i open pc can’t find cli for configuration????????????

By: Vic

Vic — Sun, 22 Sep 2013 20:05:56 +0000

By this question there isn’t disscontigous networks for the use of no auto-summary.

By: ahmad

ahmad — Thu, 19 Sep 2013 16:17:00 +0000

rip v2 is classless so why to config routing protocol like classful

By: Dervain

Dervain — Thu, 19 Sep 2013 11:22:46 +0000

Where is the command “no auto-summary” in your answer?

By: Anonymous

Anonymous — Thu, 19 Sep 2013 10:22:12 +0000

btw in the packet tracer sim that you provided, the other router has some config problems.
The serioal interface has no clock rate set and there is no RIP configured at all.

Besides that, very nice!

By: vijay

vijay — Thu, 19 Sep 2013 03:48:59 +0000

in this sim y cant we dont use the command “no auto sammary”

By: Patrick

Patrick — Wed, 18 Sep 2013 15:37:02 +0000

In RIP v2 we can use classless networks? Only in RIP v1 we can use classful networks.