Comments on: CCNA – Show Command Questions

By: Hawkeye049

Hawkeye049 — Thu, 22 May 2014 16:12:00 +0000

Also you semi-confusing a switch with a router I think. Directly connected routers don’t require a route to each other, because the ip address and mask gives them enough information about the link. Switchs foward information based on their mac table, and has no idea how to differentiate a host from a router unless the router is configured as the default gateway.

By: Hawkeye049

Hawkeye049 — Thu, 22 May 2014 15:38:17 +0000

Response to Wall Cookie: For question 5. Host B is able to ping Host A only becasue they both have a defaut gateway set. This is because they are in different vlans (This is an example of Router on a Stick). Host A not B would be able to connect to the router without the default gateway because the switch has in ip address in the same vlan(1). Because Host B is in a different Vlan, it must use the default gateway to send packets to the switches vlan interface. When the switch recieves the message(which it does), it doesn’t know where to send it back without a default gateway. Being able to Telnet/SSH and ping a switch are the two number one reasons a default gateway needs to be configured.

Correct me if im wrong. Thank You

By: Wall Cookie

Wall Cookie — Sun, 27 Apr 2014 19:26:39 +0000

Q5:
This is a dangerous question….
Host B can ping Host A and Host C = router – switch link is up/up, routing is working
If Host B can ping Host A, the it can also ping the switch on VLAN 1 interface as Host A is on VLAN 1.
The default gateway for the switch is irrelevant because it is directly connected to the router.
The only reason why Host B would not be able to access the switch via telnet is a access-class on the vty lines filtering telnet from Host B network.

None of the provided answers are correct.

Please revise question.

By: Anonymous

Anonymous — Thu, 06 Feb 2014 01:16:22 +0000

@susarn. Where can I download free ccna study guide? Please give me the link. Or can u email it to me please. ianym2@yahoo.com. Thanks

By: Asedri

Asedri — Sat, 16 Nov 2013 06:10:08 +0000

Im taking my CCNA exams at the end of this month , could any one send the new curriculum
for me.Use this email: asedrie@yahoo.com
Thanks

By: Anonymous

Anonymous — Sat, 28 Sep 2013 13:39:12 +0000

I am going to take CCNA exam October 2 2013 Mr David can give me quick advice about the exam I really appreciate you for helping

By: David Okeri

David Okeri — Mon, 23 Sep 2013 08:00:26 +0000

I did the CCNA exam on 20 sept,2013 and i highly passed it!!! Eureka 9tut and may all who contribute here be blessed. olesimbe@yahoo.com

By: Gordon

Gordon — Mon, 16 Sep 2013 18:24:08 +0000

Q5 – It took me a few minutes but now I get it. Just because the hosts have the correct default gateway doesn’t mean the switch does.

By: Kagiso

Kagiso — Fri, 13 Sep 2013 17:20:07 +0000

Hello guys, I am writing my exam in a few days, can you kindly please e-mail me the latest dumps , my e-mail address is kagiso.online@gmail.com

By: jasostrong

jasostrong — Wed, 11 Sep 2013 13:27:58 +0000

Thanks 9tut. I made it. I passed my CCNA 200-120 today. The sim is Access-list 1 , Access-list 2 & EIGRP. A lot of new questions like Netflow, Syslog, SNMP, VRRP, and GLBP.

By: RockMello

RockMello — Fri, 06 Sep 2013 04:03:06 +0000

How to use the terminal monitor command?

I can not run this command in packet tracer.
Someone please explain to me this question.
Thank you.

By: taps

taps — Thu, 05 Sep 2013 09:35:57 +0000

please may I have the latest ccna dump. email me on toraichewy@gmail.com

By: CiscoER

CiscoER — Mon, 02 Sep 2013 23:42:34 +0000

Who is this FOOL that keeps posting this AD on every module. I think I am going to skype him and have him arrested. Since he has a gmail account Google can find him.

By: ahams

ahams — Mon, 02 Sep 2013 11:34:55 +0000

Need latest ccna dump PLS ahams52@yahoo.com & does anyone know what topic are added to the new ccna exam

By: Adeel

Adeel — Fri, 30 Aug 2013 19:05:01 +0000

Hello Guys I hope you will be fine there. I have CCNA (640-802) and CCNA security (640-554) Vouchers on special discount of 58% for World wide, with six months expiry date till you purchase. Each voucher cost 70USD.
Details Required For CCNA Voucher For Discount Processing:
1-Full Name. 1st Name & Last Name (as you want to appear on certificate & documents)
2-Country.
3-City.
4-State.
5-Pin Code (or Area Code)
6-Residential Address (or where you can collect your Certificate or further correspondence
can be received)
7-Date of birth
Add me on Skype through this information which is written below:
Skype Name: rockon660
you can also email me at this email address which is written below:
madeelqaiser@gmail.com
If you have any Questions feel free to contact me.
Thanks,
Best regards,
Adeel

By: Juliano

Juliano — Thu, 22 Aug 2013 14:03:10 +0000

Pliz i will sit for the exam next month, can someone send me the latest dumps on email:spyderjas@gmail.com

By: mike

mike — Sun, 11 Aug 2013 23:08:26 +0000

I will do my exam the next two weeks, Can somebody please send me the latest dumps for CCNA… my email is miguel.santiago.luna@gmail.com

By: panget

panget — Fri, 09 Aug 2013 12:32:24 +0000

seems like there isnt any difference in SH ARP and SH IP ARP right?

By: kcding

kcding — Fri, 02 Aug 2013 15:30:57 +0000

Appreciate if someone could send me latest dump. ezrading@gmail.com

By: jerin

jerin — Sat, 20 Jul 2013 18:07:55 +0000

hi i am from kerala, i have completed my ccna, how can i find best job her plz help me

By: Bill_Ado

Bill_Ado — Wed, 17 Jul 2013 22:20:15 +0000

@Ify, @Devang Shah: the command you talking about should be ‘show ip arp’ or even ‘show arp’ and both work just fine, here is a sample output from my Packet Tracer of the commands I’m talking about:

R1#sh ip arp
Protocol Address Age (min) Hardware Addr Type Interface
Internet 192.168.77.33 – 000A.41D7.D901 ARPA FastEthernet0/0
Internet 192.168.77.34 1 00D0.D385.5601 ARPA FastEthernet0/0

R1#sh arp
Protocol Address Age (min) Hardware Addr Type Interface
Internet 192.168.77.33 – 000A.41D7.D901 ARPA FastEthernet0/0
Internet 192.168.77.34 2 00D0.D385.5601 ARPA FastEthernet0/0

I hope it helps someone

By: jamokenya

jamokenya — Tue, 09 Jul 2013 13:45:50 +0000

This site is enough to make you pass

By: bishaar mohamed

bishaar mohamed — Mon, 01 Jul 2013 19:57:39 +0000

am going to do ccna exam next month kindly can someone send it to me bishaarmf@hotmail.com

By: Oak

Oak — Sat, 29 Jun 2013 04:01:56 +0000

q5 in exam today

By: Ify

Ify — Wed, 26 Jun 2013 11:24:48 +0000

Answer to the question asked by Devang Shah on May 7th, 2013 is “show arp”. Correct me if am wrong, any one who think other wise.

By: erkhan

erkhan — Sat, 22 Jun 2013 16:22:27 +0000

Can someone Please! kindly mail me the latest dumps for CCNA R&S. Much appreciated and thanks in advance. erkang21@hotmail.com

By: erkhan

erkhan — Sat, 22 Jun 2013 16:21:38 +0000

Can someone Please! kindly mail me the latest dumps for CCNA R&S. Much appreciated and thanks in advance

By: rudy

rudy — Mon, 17 Jun 2013 20:35:52 +0000

I have taken ICND1 thought I was ready failed with 675. Taking again in a couple weeks. I would like any info anyone would be willing to send me to help me pass. Will take ICND2 after I can pass the first one. rprloop@sbcglobal.net

By: ahmed mukhtar

ahmed mukhtar — Sun, 16 Jun 2013 18:27:15 +0000

Email. ahmedfaaf@hotmail.co.uk
Can some one please send me latest dump and cram sheet appriciated your help

By: ahmed mukhtar

ahmed mukhtar — Sun, 16 Jun 2013 18:24:42 +0000

Can some one please send me latest dump thank you appriciated your help

By: Tunde

Tunde — Fri, 07 Jun 2013 20:38:37 +0000

Que 2 in exams today no new question outside what I got from this site and exam collections dumps thank you all I scored 973

By: dragan

dragan — Thu, 30 May 2013 14:41:33 +0000

Q5
It is not important what is default gateway on switch.I tried all gateways and it works.
I made this topology in packet tracer.You can put 172.19.1.254,or 172.19.32.254,or 172.19.33.254 it works anyway

By: Alfred

Alfred — Tue, 28 May 2013 20:11:25 +0000

Hassan, Thanks for the explanation of Question number 5. It makes it clear now.

By: HassanTofaha

HassanTofaha — Mon, 27 May 2013 13:10:17 +0000

Q 5 ) B choice is correct

when PC B want to telnet the int vlan 1 (which is the switch int ) the packet will follow

from PC B—> to the router sub interface 172.19.32.254 —> to int vlan 1172.19.1.250
the problem in the return path because
the int vlan 1 dos not know the ip or the sub-net of PC B(different vlan) so ,

default gateway which is 172.19.32.254 should be configured in the swich config mode

By: David Okeri

David Okeri — Fri, 24 May 2013 09:34:17 +0000

Pliz i will sit for the exam next month, can someone send me the latest dumps on email: olesimbe@yahoo.com

By: Richard

Richard — Sun, 19 May 2013 11:38:32 +0000

That’s true anonymous!
It doesn’t make sense Host B doesn’t have default gateway configure if it successfully ping other hosts. If they referring that hosts on the same subnet with Host B, well, it’s good (the exhibit shows no other hosts). But if it is on the other subnet (base on the exhibit), there’s something wrong with the question.

By: Anonymous

Anonymous — Wed, 15 May 2013 11:43:27 +0000

can someone plz post a link on the latest dumps. PLEASE

By: Anonymous

Anonymous — Mon, 13 May 2013 22:15:43 +0000

can somebody pass the latest dumb to me planning to sit ccna 640802 exam end of this month…..o email it to me pliz ashy_pra@yahoo.com

By: Devang Shah

Devang Shah — Tue, 07 May 2013 07:29:04 +0000

Question 10
Which command will show the MAC addresses of stations connected to switch ports?
A. show mac-address
B. show arp
C. show table
D. show switchport

Please answer this there is great confusion

By: Brii

Brii — Sun, 05 May 2013 18:10:32 +0000

Can anyone send latest dumps to brainbangley@gmail.com …taking test this in 2 days!

By: Zahid Ismail

Zahid Ismail — Sun, 05 May 2013 11:07:57 +0000

q5 and q7 in today exam

By: simple

simple — Mon, 29 Apr 2013 21:44:17 +0000

Q5 – ignore prev comment.

By: simple

simple — Mon, 29 Apr 2013 21:36:29 +0000

Q5 – host B can ping other 2 hosts, so gateway must already be set, i think.

By: moneim

moneim — Sat, 27 Apr 2013 04:49:02 +0000

pls i looking for last dumps can one send it to me on this email moneimcom@hotmail.com
thanks for all

By: peter

peter — Thu, 25 Apr 2013 12:41:09 +0000

kindly email me the latest dumps- wanderaptr@yahoo.com
thanks

By: Anonymous

Anonymous — Fri, 19 Apr 2013 20:56:32 +0000

Could someone send me the latest questions and answers, please. My email is nhatnguyenhoai@msn.com

By: Pouman

Pouman — Thu, 04 Apr 2013 22:48:27 +0000

Any one to send me the latest dumps please, ahmed.oubenan@gmail.com

By: Andrew Myo

Andrew Myo — Thu, 04 Apr 2013 14:54:14 +0000

I’m just trying to get CCNA. Could someone send me the CCNA question and answer like normal exam software? my email is myok.ydnb@gmail.com

thanks

By: Anonymous

Anonymous — Sat, 30 Mar 2013 11:26:30 +0000

thanks for the explanation, it helps!

By: CP

CP — Mon, 25 Mar 2013 20:45:22 +0000

@biolek hell no they haven’t change their questions..I just took the test Sat and failed 815/825, this site is still 100% valid

By: Jeannot

Jeannot — Sat, 23 Mar 2013 19:18:35 +0000

Any one to send me the latest dumps please, jeangwemwa@yahoo.com

By: Anonymous

Anonymous — Fri, 22 Mar 2013 10:21:06 +0000

somebody plz clarify the Q.5
when telnetting to swith,the souce decice ie, B will create a packet like

source ip will be 172.19.32.2
destination ip will be 172.19.1.250
source mac will be device B mac
destination mac will default gateway mac(since destination ip belongs to different subnet )
this default gateway is already assigned in B.
when this packet reaches to router,router will route the packet to 172.19.1.250 the switch.

so what is the point of assigning appropriate default gateway on switch ??

By: Me too

Me too — Fri, 22 Mar 2013 02:48:42 +0000

Same SIMs but a lot of variations. I took for the 2nd time in 90 days and saw maybe 5 questions from the 1st test I took, but 35 different questions from 9tuts pool of questions. SIM had a different look at same testing site… they were worse. Had trouble with show mac-address had to use sh mac then hit tab to get the correct command. While scrolling in a show run my commands would disappear and cause issues seeing what i typed. But passed so that is all that matters

By: biolek

biolek — Thu, 21 Mar 2013 21:56:06 +0000

@ Me too
Is it true that cisco has changed thier questions. pls give us what u saw in the exam, e.g the sims.
Thank you

By: biolek

biolek — Thu, 21 Mar 2013 21:53:29 +0000

@ Me too
Is true that cisco has changed thier question. pls give us what u saw in the examl, e.g the sims.
Thank you

By: Me too

Me too — Thu, 21 Mar 2013 01:54:05 +0000

Question 5,7 on CCNA 2nd try today. 7 was different asked for 2 answers. Asked how to see Debug output on a remote terminal

By: Wolijam

Wolijam — Tue, 19 Mar 2013 23:08:22 +0000

Can someone please email me the latest dumps to kmyllagm@hotmail.com ?
Thank you.

By: chuckles

chuckles — Mon, 04 Mar 2013 10:33:45 +0000

Q5 why A and D are wrong as long the issue we are dealing with is routing to different subnets? if we move host B to vlan 1 address subnet will resolve the issue?

By: kashif

kashif — Thu, 21 Feb 2013 00:13:52 +0000

This is for those who need latest dumps. This dumps and 9tut, its enough for you to pass exam. just remember me in your prayers. Best of luck…..
http://www.examcollection.com/cisco/Cisco.ActualTests.640-802.v2012-07-15.by.Sekhar.697q.vce.file.html

By: Sanja

Sanja — Wed, 20 Feb 2013 15:51:15 +0000

Thank you anonymous for your post. This really encourage me as I am planning to take exam next week and I am so nervous.

By: Anonymous

Anonymous — Sun, 17 Feb 2013 16:40:50 +0000

Ifailed the exam.. dont be over confident.. exam is easy.. just take your time.. i missed something in lab simulation.. because i already know the answer.. idid it fast.. not knowing that i forgot something..

By: snapback caps

snapback caps — Sun, 17 Feb 2013 09:28:21 +0000

Great post. I was checking constantly this weblog and I’m inspired! Very useful information specially the last phase :) I take care of such info a lot. I was seeking this certain info for a very long time}. Thanks and good luck. snapback caps http://wholesalesnapbacks.journalspace.com/

By: Osito

Osito — Thu, 14 Feb 2013 03:55:05 +0000

please send me the latest dumps. robertomiranda123233@hotmail.com every one can give an idea. I hope someone can help me.

By: Osito

Osito — Thu, 14 Feb 2013 03:54:07 +0000

The question is 5 is confused, however the vlan 1 is diferent network than the vlan from host B.

If you think host b can reach host a because host B has a default gateway.

Switch only have layer 3 conectivity for vlan 1 because it is its own network. The switch does not how to reach the vlan 32. The switch needs to point the router to reach that network because the router can send traffic accross every single vlan.

The switch is not a layer 3 device ¨It needs to forward the traffic to the router¨

I hope that helps.

In the picture there is not ¨show ip route¨

So We can not say that the switch does not have a default gateway but it would be the only answer.

this is basic routing. But needs to be anylized very well. That is why only practicing we can understand that.

By: Bibs

Bibs — Mon, 11 Feb 2013 09:37:57 +0000

Can someone please send the latest dump to me @ gbogbolomo@gmail.com. I am taking the exams on the 21st of February. Thank you

By: Congo

Congo — Fri, 01 Feb 2013 02:57:08 +0000

@mohammed ismail

Shekhar Dumps and 9tut Labs .. :D

By: mohammed ismail

mohammed ismail — Thu, 31 Jan 2013 19:24:41 +0000

Dears iam gng2 give my exam in another few days, please anybody cn help me by giving latest dumps, email me amann76@yahoo.com

By: ANNY

ANNY — Tue, 29 Jan 2013 13:27:21 +0000

Q5… the switch needs a default gateway pointing to 172.19.1.254…the description in the answers is badly written.

1. The default gateways are on the router
2. The switch has an ip address in vlan1…Int vlan 1….but does not have a default gateway command configured pointing to the ip address on router 172.19.1.254
3. Therefore client A can talk to the switch because they are on the same subnet and you do not need a default gateway configured to communicate on same subnet, Clients B and C can not Telnet to the switch.

4. Ans B is correct.

By: Anonymous

Anonymous — Thu, 24 Jan 2013 14:07:56 +0000

Q 5 is definetely confusing, since all 4 answers are wrong and the explanation isn’t any better. Pls fix this

By: shanks

shanks — Mon, 21 Jan 2013 11:49:45 +0000

@amp:Q5: Your analysis is correct. The question should not have had “…pings from host B to other two hosts are successful.”. :)

By: Anonymous

Anonymous — Tue, 15 Jan 2013 11:00:08 +0000

can someone send me latest dumps thx in advance alexndow@hotmail.com

By: Marco

Marco — Sat, 12 Jan 2013 03:27:25 +0000

Tks in advance!

By: Marco

Marco — Sat, 12 Jan 2013 03:27:10 +0000

Can someone plz send me the latest dumps? mgiurni@gmail.com

By: amp

amp — Mon, 07 Jan 2013 04:53:29 +0000

For question 5, however this Explanation part would confuse us :) :

“But host B (172.19.32.2) and the management IP address of the Switch (172.19.1.250) are not in the same subnet so host B needs a default gateway to telnet to the switch. The default gateway on host B should be 172.19.32.254.”

Because Host B already able to reach Host A and C, this could means default gateway is configured correctly in Host B.

Let me know your thoughts.

By: amp

amp — Mon, 07 Jan 2013 04:48:54 +0000

IMHO for question 5, B is the correct answer.

It says :
B. The switch needs an appropriate default gateway assigned.

Other hosts is reachable from B, except the switch. I consider the switch acts as a host. Therefore this could means other hosts default gateway is configured correctly except the switch.

By: serge

serge — Sun, 06 Jan 2013 16:45:45 +0000

Hi.
I think qwestion 5 is not so corectly. If HOst B can ping to host A and C, it means that host B has default gatewey, so B can telnet to switch (179.19.1.250).
Answer B is the best answer, but this qwestion is bad write qwestion.
Wy?

By: can somone please explain

can somone please explain — Wed, 02 Jan 2013 21:38:00 +0000

What exactly is a dump. I am assuming it is a leak of a previous test? if you could direct email cjohn1887@gmail.com would be massively appreciated. :) Have a good day and good luck.

By: ojnaj

ojnaj — Wed, 02 Jan 2013 00:11:37 +0000

@Pijush

No problem because host B can ping other two hosts that belongs to deifferent VLANs.

By: Dhina

Dhina — Tue, 01 Jan 2013 14:32:40 +0000

thanks ZZ

By: Pijush

Pijush — Sun, 30 Dec 2012 16:31:16 +0000

Question 5

if there is no connectivity probs from host B to Router for inter-vlan communication, so what is preventing host B to accessing vlan-1′s management interface(ip of vlan 1). want a real answer!