Comments on: CCNA – Troubleshooting 2

By: Nelio

Nelio — Mon, 22 Sep 2014 15:48:13 +0000

it is so easy problem i dviroseced it after week of trying ::just change the option from the router in 192.168.1.1 and choose dynamic IP instate of static IP not from the mobile like we always do but from the wireless option the save changes and bake to mobile >>settings>>connectivity >> wifi>>and select network you use and click on forget if it in static IP and leave it if it was in dynamic IP then nothing browse the internet normally i have wave 525a0sorry for bad english language

By: kays

kays — Sat, 28 Sep 2013 14:07:01 +0000

I am preparing to sit for the 640-802 on the 30th of this month. If you hae the latest dumps for this exam kindly share with me on kalumbachola@gmail.com. time is ticking. tick tock tick tock……………………

By: zZWindzZ

zZWindzZ — Thu, 26 Sep 2013 12:37:06 +0000

Please someone can explain Q4?Thank you so much!

By: zZWindzZ

zZWindzZ — Thu, 26 Sep 2013 12:32:01 +0000

Sorry,
I mean Q3.If the link between Host1 and Switch1 is down or the link between Switch1 and Router1 is down then Why host 2 can’t recieve the unreachable msg??

By: zZWindzZ

zZWindzZ — Thu, 26 Sep 2013 12:30:13 +0000

Someone plesase explain why “If the link between Host1 and Switch1 is down or the link between Switch1 and Router1 is down then Host1 can not receive this reply -> A and F are not correct.””??
Thanks for advance!

By: Pawsa

Pawsa — Sun, 22 Sep 2013 09:18:17 +0000

I want last dump
I will take the exam coming 28 please send me the last dump hanmins@gmail.com

By: jasostrong

jasostrong — Wed, 11 Sep 2013 13:41:01 +0000

Thanks 9tut. I made it. I passed my CCNA 200-120 today. The sim is Access-list 1 , Access-list 2 & EIGRP. A lot of new questions like Netflow, Syslog, SNMP, VRRP, and GLBP.

By: immortal96

immortal96 — Tue, 03 Sep 2013 00:49:31 +0000

Can you guys send me the latest dumps for the CCNA. Thank you. immortal96@hotmail.com

By: Adeel

Adeel — Wed, 14 Aug 2013 09:12:08 +0000

Hello Guys I hope you will be fine there. I have CCNA (640-802) and CCNA security (640-554) Vouchers on special discount of 58% for World wide, with six months expiry date till you purchase. Each voucher cost 70USD.
Details Required For CCNA Voucher For Discount Processing:
1-Full Name. 1st Name & Last Name (as you want to appear on certificate & documents)
2-Country.
3-City.
4-State.
5-Pin Code (or Area Code)
6-Residential Address (or where you can collect your Certificate or further correspondence
can be received)
7-Date of birth
Add me on Skype through this information which is written below:
Skype Name: rockon660
you can also email me at this email address which is written below:
madeelqaiser@gmail.com
If you have any Questions feel free to contact me.
Thanks,
Best regards,
Adeel

By: Valon

Valon — Sun, 11 Aug 2013 13:44:33 +0000

I passed the CCNA exam 640-802 , so happy :)
I will advice everyone that this exam is not very simple .You have to concentrate and read the questions 3 times before you answer.Good Luck to everyone , if anyone needs any advice can email me at suse_X@hotmail.com

By: Lucien

Lucien — Sun, 11 Aug 2013 00:17:51 +0000

please send me lastest dumps in my email
lucien07@hotmail.com thanks in advance

By: assedBandalet

assedBandalet — Thu, 08 Aug 2013 15:32:35 +0000

By: fusetouddetty

fusetouddetty — Wed, 07 Aug 2013 07:40:43 +0000

By: Vick

Vick — Sun, 21 Jul 2013 16:55:40 +0000

freinds please help me i wanna to take the CCNA EXAM IN COMING DAYS
please send me last dumps in my email
vickakop@gmail.com
thanks in advance

By: Krysk

Krysk — Tue, 16 Jul 2013 22:12:26 +0000

Can someone send me the same info as Shikamaru123? I am taking mine on the 31st and trying to make sure i hit everything possible – i’ve taken once before and ready to get this behind me!! Thanks! Email is Krysk24@yahoo.com

By: Shikamaru123

Shikamaru123 — Tue, 02 Jul 2013 22:34:44 +0000

Can someone send me the latest dump
comanche57@hotmail.com

By: wgz

wgz — Mon, 01 Jul 2013 19:50:56 +0000

To said:

Yes, you can do show cdp neighbor details on routers. It will show only cisco’s equipment.

By: David Okeri

David Okeri — Fri, 07 Jun 2013 09:16:18 +0000

Pliz i will sit for the CCNA exam next month, can someone send me the latest dumps on email: olesimbe@yahoo.com

By: Korish

Korish — Wed, 29 May 2013 19:46:55 +0000

Q1 & Q3 came to my exam today.

By: Said

Said — Sat, 18 May 2013 08:55:44 +0000

Hi guys,
Please can anyone tell me if I can use the show cdp neignbors detail on the routeur?

By: Zahid Ismail

Zahid Ismail — Sun, 05 May 2013 15:09:58 +0000

q3 in today exam

By: Anitha

Anitha — Wed, 24 Apr 2013 21:12:28 +0000

hi diogo .. thanks for your information. can u pls update the second link again?

By: Anonymous

Anonymous — Tue, 23 Apr 2013 18:13:40 +0000

hi Diogo…Thanks a lot for the links but the last one seems to be broken,can you upload it again?
I am giving the exam of 9th May. Thanks again.

By: Diogo

Diogo — Thu, 18 Apr 2013 13:26:25 +0000

Here the dumps i’ve studied for, and of course, for the 9tut too.
I think its enough to pass the exam, i passed yesterday with 894/1000.

good luck.

https://www.dropbox.com/s/zcu7630r096l14j/Cisco.ActualTests.640-802.v2013-01-28.by.Spike.662q.vce

https://www.dropbox.com/s/vqecpkvx2q3skpc/ccna%20640-802%20pass4sure.v10.0.pdf

By: Fraz

Fraz — Wed, 17 Apr 2013 18:51:31 +0000

Hi Guys,
Which dump from exam collection is valid now a days.

By: Pasu

Pasu — Wed, 17 Apr 2013 07:08:17 +0000

@Gabiano
Your answer is correct but there is mistake in your explanation.
0.0.7.255 is wildcard mask of /21 not /29
/29 will have wild card mask of 0.0.0.7

And also with the increment of 8 the mask could be either /13, /21 or /29 but looking at the ip address we can say it belongs to /21 not /13 or /29 because in /13 only first octet remains same and in /29 only forth octet changes while the rest remain same but in this case the first and second remain same and the third and forth change so it must be /21.

By: Gabiano

Gabiano — Mon, 08 Apr 2013 10:46:04 +0000

The answer is D because the subnet mask would be 255.255.248.0. That will give you a wildcard mask of 0.0.7.255. The reason why you would have a 255.255.248.0 mask is because looking at the third octet of the IP address range given, the range of IP address from 8 to 15 will be 8. Since 8 is your increment, the mask can be either /13, /21, or /29. Looking at the possible answers, the only wildcard mask that would get you any of the 3 masks I mentioned would be D. The wildcard mask of 0.0.7.255 will get you a mask of /29, or 255.255.248.0.

By: Anonymous

Anonymous — Fri, 05 Apr 2013 08:02:15 +0000

Which wild card mask will enable a network administrator to permit access to the Internet for only hosts that are assigned an address in the range of 192.168.8.0 through 192.168.15.255?
A. 0.0.0.0
B. 0.0.0.255
C. 0.0.255.255
D. 0.0.7.255
E. 0.0.3.255
Correct Answer:D
any body can explain about this question

By: Bhargav

Bhargav — Thu, 04 Apr 2013 05:38:23 +0000

if u want online training regarding about ccna contact bhargav.cisco@gmail.com

By: Me too

Me too — Thu, 21 Mar 2013 03:18:07 +0000

Question 3 on CCNA 2nd try today

By: Search

Search — Tue, 19 Feb 2013 11:05:05 +0000

Can you please send me latest dumps and labs in my email abdessamad.elaouni@gmail.com.

By: Martha

Martha — Sun, 17 Feb 2013 23:10:34 +0000

Hi I plan on taking test next month also. Can someone please send me the latest dumps? rivers20032001@yahoo.com

By: Muditha

Muditha — Fri, 15 Feb 2013 01:52:09 +0000

Hi guys,
Please can anyone tell me how to crack VCE reader? I have a cracked version 1.9. But I can not use it to open VCE files, it say I shoul update my reader. In exam collection current version is 3.1>. Please friends help me. please please !!!!

By: NBP

NBP — Sat, 09 Feb 2013 03:07:41 +0000

Hi I plan on giving the exam next month. Please send me the dumps if anyone has them on alfoundationist@gmail.com

By: Alex

Alex — Sun, 27 Jan 2013 19:37:27 +0000

please i want to take ccna exam 640-802 i want too much advice who can help me to win this exam!!thank you for all.that is my email:alex.eboko@yahoo.com

By: Q3. The default gateway on Host1 is incorrect.

Q3. The default gateway on Host1 is incorrect. — Tue, 22 Jan 2013 08:28:32 +0000

“For answer D, if the default gateway was not configured correctly on Host1 (in this case the default gateway should be 10.1.1.1/24) then 10.1.1.1 can not receive the ping packets from Host1 and can not reply for Host1 that the destination is unreachable -> D is not correct.”

Host1 and default gateway are on the same subnet, so Host1 do not need a default gateway to ping the router interface. It is basic network!!!?

By: wow gold

wow gold — Tue, 15 Jan 2013 07:06:40 +0000

Can you please send me the code for this script or please enlighten me in detail concerning this script?
wow gold http://www.wow-gold-team.com/

By: Nay Linn

Nay Linn — Sat, 12 Jan 2013 17:11:50 +0000

Could anybody send the latest dumps to me please? i will take the exam the next week naylinnisme@gmail.com . Thanks..

By: Jeet

Jeet — Mon, 31 Dec 2012 09:19:51 +0000

I am going to give exam in jan 2013,plese send me latest dumps on 12VVIK@GMAIL.COM
if anybody is having,
Thanks in advance

By: Hatch

Hatch — Sun, 30 Dec 2012 20:34:24 +0000

I’m part of a small group studying for the CCNA exam…which we will take in a couple of weeks. We are using 9Tut (premium) with the sims.

Q. Will using only 9tut get us through the exam or should we use 9tut with something like Prepking or TestKing to prepare us? Any help would be greatly appreciated…. before I spend the $99 on a test engine.

Thanks,
Hatch

By: TDy11

TDy11 — Thu, 13 Dec 2012 20:16:38 +0000

TY 9tut.

Today I have passed the CCNA. (860/825)
50 questions 3 labs (VTP, EIGRP, ACL). 35 from 9tut.

Also thanks a lot Brar and Sekhar (still valid from examcollection)

Ty again 9tut

from here none

By: Kahlan

Kahlan — Wed, 28 Nov 2012 13:20:00 +0000

You should read Markus’ comment (6 comments above yours)

By: Anonymous

Anonymous — Wed, 28 Nov 2012 09:12:31 +0000

can somebody explain answers for question 4

By: Avni

Avni — Sat, 20 Oct 2012 06:04:58 +0000

thanks marky! i knw d basic but does nyone knw if d dumps have been updated… ive solved all qns by prepking and sekhar…

By: marky

marky — Fri, 19 Oct 2012 19:33:27 +0000

@avni, you need to know the basics.

By: Avni

Avni — Wed, 17 Oct 2012 09:10:07 +0000

im planning to take d exam on 22nd oct… is it enough if i study all d qns n sims from 9tut??
need an urgent reply…

By: anon

anon — Wed, 17 Oct 2012 05:09:47 +0000

Yo 9tut this is a thankless job your doing
Thank you so much

By: Markus

Markus — Fri, 21 Sep 2012 22:39:22 +0000

@9tut, I think it would be very helpful to add this explanation from Lurker to question 4:

Q4 = E & F
Down / Down –> A. The cable that is connected to S0/0 on RouterA is faulty.
Administratively Down / Down –> B. Interface S0/0 on RouterB is administratively down.
Up / Up –> C. Interface S0/0 on RouterA is configured with an incorrect subnet mask.
Up / Up –> D. The IP address that is configured on S0/0 of RouterB is not in the correct subnet.
Up / Down –> E. Interface S0/0 on RouterA is not receiving a clock signal from the CSU/DSU.
Up / Down –> F. The encapsulation that is configured on S0/0 of RouterB does not match the encapsulation that is configured on S0/0 of RouterA.

By: ropam

ropam — Mon, 17 Sep 2012 18:04:22 +0000

Just cleared my exam with a perfect perfomance (1000/1000)…..GRATITUDES: First and foremost to the almighty God for everythng he has been since i started preparing for this exam abt a year ago! the Todd lamlle (6th edition), this book gave me the foundation i needed and i consider myself one of the fastest subnetting geek thanks to Todd’s chapter on subnetting…then seriously, who wud forget this guy (9tut) thanks alot man,i finished my exam 40 minutes before time thanks to the speed you gave me in simulations…examcollection, thanks alot guys i ddint see any qn that i hadnt met in the dumps before, then the CBT nuggets videos….they cleared (enhanced) all of the concepts i have learned from all of the materials i have already mentioned! thank you all so much…..i will DONATE when i get my credit card! keep the good work going 9tut

ABOUT MY EXAM:
I had total of 50 questions….
Had three simulations….ACL2, same as here at 9tut but modified as the third table of modifications above and i was dealing with host B plus different IP addresses, EIGRP almost the same as here, had to change the AS in router Home 2 from somethng 21 to 221 and add the appropriate networks also i had to delete and add some networks from router Home 1 (central router) and finaly the VTP…same as here just different question to follow the same procedures in resolving
NB: i ddnt see anythng that i had not come across before

for any other enquiries find me at ropamson@gmail.com …..best of luck for everybody working on CCNA

By: Lurker

Lurker — Mon, 17 Sep 2012 16:23:21 +0000

Q4 = E & F

Down / Down –> A. The cable that is connected to S0/0 on RouterA is faulty.
Administratively Down / Down –> B. Interface S0/0 on RouterB is administratively down.
Up / Up –> C. Interface S0/0 on RouterA is configured with an incorrect subnet mask.
Up / Up –> D. The IP address that is configured on S0/0 of RouterB is not in the correct subnet.
Up / Down –> E. Interface S0/0 on RouterA is not receiving a clock signal from the CSU/DSU.
Up / Down –> F. The encapsulation that is configured on S0/0 of RouterB does not match the encapsulation that is configured on S0/0 of RouterA.

By: Sahan

Sahan — Wed, 05 Sep 2012 19:03:25 +0000

@maged Ignore my first post pls

Multi Point interfaces in frame relay are susceptible for split horizon ( wiki -> method of preventing routing loops in distance-vector routing protocols by prohibiting a router from advertising a route back onto the interface from which it was learned), either you disable split horizon or you can use
Sub interfaces and not be prevented from sending updates due to split horizon

By: Sahan

Sahan — Tue, 04 Sep 2012 16:48:28 +0000

@maged Sub Interfaces would be a cheaper alternative than Multi Point

By: maged

maged — Sun, 02 Sep 2012 03:25:55 +0000

question what is the advantage of using multi point than using point subinterfaces in frame relay

By: FML

FML — Wed, 29 Aug 2012 14:51:08 +0000

@CCNA

Wrong.

Try the test on a real router.

Option “B” refers to Ser 0/0 being administratively shutdown on Router B which will result Router A in ser 0/0 down, line protocol down (Or considered hard-down)

Just because you connect a cable to an interface does not bring it up, it has to recieve a signal from the other end, it will not receive a signal if the other end is administratively shutdown. The CSU/DSU is internal to the Controller of the Serial Interface.

CCNA? You have no idea what you are talking about, try it on a real router.

By: CCNA

CCNA — Mon, 20 Aug 2012 00:48:49 +0000

@9tut
Q4 B F should be the correct choices. If Router B has its S0/0 link administratively shutdown on Router A the S0/0 output will have up/down. Choice E is incorrect because there is no CSU/DSU listed in diagram. Router B is acting like a CSU/DSU by providing clocking but is not a CSU/DSU device.

By: Job

Job — Mon, 23 Jul 2012 12:40:16 +0000

Hey guyz, i really like ur comments n am gaining alot, nxt week am seating for CCNA exams

By: sara

sara — Mon, 16 Jul 2012 18:08:33 +0000

i pass ccna today thanx 9 tut

By: Almira

Almira — Thu, 12 Jul 2012 04:28:29 +0000

Which command will show the MAC addresses of stations connected to switch ports?
A. show mac-address
B. show arp
C. show table
D. show switchport
DimS answers A
wich command will show the mac address connecteds to switch ports:
*show mac-address
*show arp
*show table
*show switchport
xallax answers B
Can you please explain the difference of the two questions or 2 commands. Im not memorizing the answers or the questions.
Please explain the show arp and show mac-address-table
MAC addresses of stations connected to switch ports = what do you mean by stations?
Thanks. Thanks.

By: God's Grace

God's Grace — Thu, 21 Jun 2012 00:27:03 +0000

I passed my ccna exam today Praise be to God! Thank you Jesus! and thanks to 9TUT for the tutorials and explanations, great site and thanks to xallax for your explanations to questions and thanks to http://www.examcollection.com for the dumps. Pls guys lets donate and help to keep this site up!

48 ques for exams including 3 simulation, I had EIGRP, Acesslist2 and VTP. Make sure the practice the simulation, use packet tracer or gns3. Best wishes to all!

By: MUHAMMAD RASHID

MUHAMMAD RASHID — Mon, 28 May 2012 09:10:15 +0000

I PASSED CCNA EXAM TODAY THANKS TO ALL MIGHTY ALLAH
960/1000

By: smart1

smart1 — Wed, 23 May 2012 19:50:18 +0000

reading ccna from exploration notes is gr8 if you have time,and read todd lammels book for subnetting.it’s the best

By: STX

STX — Tue, 22 May 2012 14:28:50 +0000

Similarity of Q3 out in ICND2

By: puneet

puneet — Sun, 20 May 2012 14:20:03 +0000

Hi all, I am taking CCNA 640-802 exam first time on 30/05/2012. Could anyone please send me latest dumps which are valid for UK? My e-mail address is puneet_gill84@yahoo.co.uk. Many thanks.

By: Priya

Priya — Thu, 10 May 2012 17:04:55 +0000

Hi Everybody, Im doing a Self study.Im writing ccna by Last week of this month.Can any one send me the latest dumps.This would be a great help for me.
Send it to priya.ccna@yahoomail.in

By: edz cudz

edz cudz — Sat, 28 Apr 2012 18:32:35 +0000

thanks 9tut!=D

By: ccnaguy

ccnaguy — Wed, 25 Apr 2012 17:20:09 +0000

Q 4 is not clair
first there is no CSU/DSU no ISP
DCE/ maybe

By: Lazanya

Lazanya — Wed, 25 Apr 2012 13:31:03 +0000

@Franz, any Professional level exam will renew all your CCNA and CCIP. Any higher level exam will renew your certifications. you can read it from here: http://www.cisco.com/web/learning/le3/le2/le37/le8/learning_certification_type_home.html

By: Michael

Michael — Tue, 24 Apr 2012 05:50:15 +0000

Downloads Cisco Packet Tracer Software Downloads Packet Tracer Version 5.3 2 Software Downloads Packet Tracer version 5.3.2 is a mtniaenance release that fixes functional and technical issues in the previous versions. It

By: Franz

Franz — Sun, 22 Apr 2012 15:16:23 +0000

Hi guys,I pessad CCNA in 2008 and then pessad CCIP in 2010/Also cleared 1v5 paper BSCI of CCNP.My CCNA is expired now also CCIP.How can I get recertified?which exam do I need to take to get recertified?CCNA or CCNP any 642(Switch or TSHOOT).I am confused now. can anybody here let me know, please.Cheers

By: Vijay

Vijay — Sun, 22 Apr 2012 11:46:54 +0000

free iphone 5 opothsHey there this is kind of of off topic but I was wondering if blogs use WYSIWYG editors or if you have to manually code with HTML. I’m starting a blog soon but have no coding knowledge so I wanted to get guidance from someone with experience. Any help would be greatly appreciated!

By: chrib

chrib — Sat, 31 Mar 2012 13:11:38 +0000

@doubt

we have a timed out connection.that means you try to connect somewhere and you receive no reply

A: i guess while transferring the new IOS you would get an error that flash doesn’t have space for it
C: That would be an error having finished transferring it and being in process of installing it
D: that would be an error again while trying to install it
E: you transfer a file from TFTP to flash not the opposite

By: doubt

doubt — Tue, 27 Mar 2012 06:00:11 +0000

can someone explain Q5 with proper reasons eliminating each option

By: Bishop

Bishop — Sun, 25 Mar 2012 17:54:54 +0000

@Rico, Q4 isn’t that difficult to understand and all you have to do is look at if the issues is physical(the first status) or is protocol related (the second status). If its the first it’s going to deal with cable problem which could be a lose cable, incorrect cable, etc. With the line protocol down it’s going to relate to anything you can’t physically touch. Like, the encapsulation used, the clock rate, or the incorrect hello and dead times, etc. I hope this helps.

By: Jay PL

Jay PL — Wed, 14 Mar 2012 20:51:19 +0000

@ icy Well (c) is the same as you wrote
C. ACCESS1(config)# line vty 0 4
ACCESS1(config-line)# login
ACCESS1(config-line)# password cisco

so it is correct. You can not access Access1 router because probably configuration on line is something like this
C. ACCESS1(config)# line vty 0 4
ACCESS1(config-line)# login
ACCESS1(config-line)# no password

By: icy

icy — Wed, 14 Mar 2012 06:51:53 +0000

pls give response ffs im taking exam on 16th march

By: icy

icy — Wed, 14 Mar 2012 06:49:06 +0000

in Q2.> we conf telnet
#line vty 0 4
#pass cisco
#login
#exit
if this is correct then any 1 told me how c option is correct

By: Alpa

Alpa — Tue, 06 Mar 2012 16:45:57 +0000

@Koffy and Xallax… I trust u both the most… Bcs i read all the comments in 9tut… Very helpful… i studied most of the things from comments itself.. i will appear in exam on this 15th n going to request u both .. pls send me latest dumps..though i have still trust u both.. so requesting.. alpa251088@gmail.com

pls ASAP
Thanks..

By: Dana

Dana — Thu, 01 Mar 2012 05:39:33 +0000

It only costs 24.95 to pay and register for the vce software from Avanset and is more than worth the success of taking the practice exams to gain CCNA. I encourage you to do it for the dump questions.
Dana

By: Rico

Rico — Wed, 29 Feb 2012 07:32:54 +0000

Hi Guys.
Anyone can elaborate Q4..I’m quite confused.
Thanks!

By: Arpit

Arpit — Sat, 25 Feb 2012 14:10:29 +0000

http://www.examcollection.com/cisco/Cisco.Acme.640-802.v2012-02-07.by.Arpit.486q.vce.file.html

Most Valid Dump.. All most 99% answers are correct.