Comments on: CCNA – VTP Questions

By: Mike

Mike — Sun, 10 Nov 2013 11:31:42 +0000

Thanks to 9tut. It is a terrific, terrific program. I passed my CCNA with 903 and now looking ahead to take CCNP

By: Kip

Kip — Wed, 09 Oct 2013 18:02:40 +0000

I am study hard, I don’t have a lot of time , because I enjoy networking so much and I do not do I for a living , hope to some day, can someone please let me known how to get packed tracer, I went one line and they where all dead end roads, I have boson but It does Not do well at all, lots of bugs in it, so please can someone lead me in right way to get it, Thank you very much. Kip

By: Anonymous

Anonymous — Thu, 26 Sep 2013 20:22:24 +0000

omer please give me ur email id.. i am giving this exam on monday

By: omer

omer — Wed, 25 Sep 2013 18:50:45 +0000

hiiii i passed today with 867,,, thanks 9tut.com and examcollection,, valid dumz are in examcollection acme that has 305 votes and dumz by karvin ,,lab was eigrp, vtp, acl2,, same as here in 9tut.com with some modification,,any one need some dumz email me

By: Anonymous

Anonymous — Mon, 23 Sep 2013 22:11:05 +0000

PROblem is that 0.0.0.0 is not in the show cdp neighbors so they dont correlate as they should

I read somewhere that this happened to someone in the exam and they reexecuted the sh vtp status and it appeared correctly. I will try this approach

By: Anonymous

Anonymous — Mon, 23 Sep 2013 12:46:15 +0000

@ Anonymous 0.0.0.0 represents the IP. So just use whatever IP shows up on your exam.

By: Anonymous

Anonymous — Mon, 23 Sep 2013 03:31:44 +0000

9tut I also noticed on one of your explanations it showed config last modified as zeros but it did not matter for what you were explaining. What do we do if this happens on the exam?

By: Anonymous

Anonymous — Mon, 23 Sep 2013 03:28:06 +0000

i figured out the answer to above… just type in the boxes but I have looked everywhere for the answer to this.

Sw-AC3#sh vtp status
VTP Version : 2
Configuration Revision : 7
Maximum VLANs supported locally : 255
Number of existing VLANs : 7
VTP Operating Mode: Client
VTP Domain Name : home-office
VTP Pruning Mode : Enabled
VTP V2 Mode : Diable
VTP Traps Generation : Disabled
MD5 digest : 0×22 0×07 0xF2 0x3A 0xF1 0×28 0xA0 0x5D
Configuration last modified by 0.0.0.0 at 3-1-93 00:28:35

Why is the sim showing 0.0.0.0 as the ip address for last modified. I ran vtp sim 2 twice and got 0.0.0.0 the first time and a valid ip to look up in sh cdp neig det the second time. Is this just a glitch?

By: Anonymous

Anonymous — Sun, 22 Sep 2013 19:57:47 +0000

I can open the vtp sim and get the questions but can not get the cli to lanch so I can show mac table any ideas why?

By: malik

malik — Wed, 18 Sep 2013 23:03:03 +0000

email latest dump please
shahram327@gmail.com

By: Borrak

Borrak — Mon, 16 Sep 2013 15:31:47 +0000

Can someone please forward the latest dump from Sekhar and Acme to me at borrak2@gmail.com as I writing my CCNA exam on Sep 24, 2013. Thanks.

By: Ali

Ali — Fri, 13 Sep 2013 13:39:47 +0000

Hi Everyone

I heard from some of my friends that nowadays CCNA has given difficult labs and questions in CCNA Exam. Is it true or fake. By the way, I am preparing myself from latest DUMPs of Sekhar and Acme etc.

your help would be appreciated.

By: Chompiras

Chompiras — Wed, 11 Sep 2013 22:57:18 +0000

Q6 @Bit: Interesting, you can create the vlan 50 from the Switch(config-vlan)# mode.

However the Switch(vlan)# prompt seems incorrect.

A is definitely valid, so I would go with A instead of E.

By: jasostrong

jasostrong — Wed, 11 Sep 2013 13:38:54 +0000

Thanks 9tut. I made it. I passed my CCNA 200-120 today. The sim is Access-list 1 , Access-list 2 & EIGRP. A lot of new questions like Netflow, Syslog, SNMP, VRRP, and GLBP.

By: Bhargav

Bhargav — Wed, 04 Sep 2013 14:36:49 +0000

hi
this is bhargav i am ccna certify
with cost of 10000
i will send
ccna power point study notes
ccna lab manuals
ccna command guide book

By: Bit

Bit — Mon, 02 Sep 2013 12:01:02 +0000

Q6. @phil: You CAN actually create a vlan from Switch(vlan)# prompt. Try it…

By: RAJAT KUMAR DWIVEDI

RAJAT KUMAR DWIVEDI — Wed, 28 Aug 2013 05:26:19 +0000

i always find question where i see nd go to solve .i read a number of topics in here. this section i enjoyed i hope in future i will take benifit on behalf of you.
again i say good one.

By: Adeel

Adeel — Mon, 26 Aug 2013 15:04:18 +0000

Hello Guys I hope you will be fine there. I have CCNA (640-802) and CCNA security (640-554) Vouchers on special discount of 58% for World wide, with six months expiry date till you purchase. Each voucher cost 70USD.
Details Required For CCNA Voucher For Discount Processing:
1-Full Name. 1st Name & Last Name (as you want to appear on certificate & documents)
2-Country.
3-City.
4-State.
5-Pin Code (or Area Code)
6-Residential Address (or where you can collect your Certificate or further correspondence
can be received)
7-Date of birth
Add me on Skype through this information which is written below:
Skype Name: rockon660
you can also email me at this email address which is written below:
madeelqaiser@gmail.com
If you have any Questions feel free to contact me.
Thanks,
Best regards,
Adeel

By: Paul

Paul — Tue, 20 Aug 2013 11:23:41 +0000

How many questions are there in the real CCNA exams

By: Bhargav

Bhargav — Sat, 17 Aug 2013 15:01:37 +0000

hi
this is bhargav i am ccna certify
with cost of 10000
i will send
ccna power point study notes
ccna lab manuals
ccna command guide book

By: ikenna

ikenna — Mon, 12 Aug 2013 16:32:39 +0000

I will wrt the eam dis Friday, I need GOD to pass the exam

By: phil

phil — Sat, 06 Jul 2013 21:52:40 +0000

@ bam. regarding Q6, you’re right the command shwitchport access vlan assigns a vlan to a port but for choice letter E it has a wrong configuration mode, it should be:
Switch(config)# vlan 50
not
Switch(vlan)# vlan 50

By: sano

sano — Thu, 04 Jul 2013 16:51:04 +0000

plz send me leastest dumps sanoj63232@gmail.com

By: richtoe

richtoe — Tue, 02 Jul 2013 22:39:02 +0000

To get all questions for VCE dont do update on install!!!!!!

By: ndane

ndane — Mon, 01 Jul 2013 12:01:28 +0000

i have problem to open dump from spike only 5questions please can some one help direct me to open the full question

By: Job Lokore

Job Lokore — Thu, 27 Jun 2013 05:11:04 +0000

I am taking my ccna exam next month. Can someone send me the latest dumps and/or links for sims to my email: macsucre2012@gmail.com please.

By: Awais ahmad

Awais ahmad — Wed, 26 Jun 2013 09:03:28 +0000

send me leastest dumps mughal.awais198@gmail.com

By: bam

bam — Fri, 14 Jun 2013 07:49:24 +0000

@ ruth, the answer in number is D. tried and test it in networking environment. try on packet tracer for your self to confirm…

Q:6 in my opinion yes the command can add vlan 50, but when you say switchport acess vlan your assigning a port to be a part of vlan ie: fa0/1. the question is add vlan 50 not in the interface port, so i thinks the answer is e,

its only my opinion… correct me if im wrong….

By: Ruth

Ruth — Thu, 13 Jun 2013 16:05:12 +0000

Also for Q6, the A answer will create a new vlan as well so A is right too.

By: Ruth

Ruth — Thu, 13 Jun 2013 16:03:37 +0000

Q4. Is that the right answer because a switch in transparent mode will not permit the editing of its database, it will just forward the advertisement to another switch even though it can create vlans and update its own database but it will not forward the vlans created by it to another switch. I need clarification please on this.

By: Leandro Uchoa

Leandro Uchoa — Tue, 04 Jun 2013 23:46:30 +0000

Parabéns Jose 254 vou fazer a minha amanha dia 05/06/2013.

By: jose +254

jose +254 — Tue, 04 Jun 2013 20:37:50 +0000

preparing to enrol for CCNP….
where do i get help?
plz inbox me kyaloj30@yahoo.com

By: jose +254

jose +254 — Tue, 04 Jun 2013 20:34:27 +0000

thanks 9tut,, av foud this website the most helpfil for my revision. starting from theory to simulations. i passed my CCNA today with 894/1000 . vtp, eigrp and acl 2 sim were there.

By: David Okeri

David Okeri — Tue, 04 Jun 2013 07:27:55 +0000

Pliz i will sit for the exam next month, can someone send me the latest dumps on email: olesimbe@yahoo.com

By: Maddy

Maddy — Mon, 03 Jun 2013 06:52:28 +0000

Can you email me latest dumps at amazedio12@gmail.com

By: row

row — Sat, 01 Jun 2013 08:30:25 +0000

am having exam on monday 3rd june, plz can any 1 send me the latest ccna dumps, and 1 more thing where ill get VCE new version software?? plz guide me…my mail id ruchibk043@gmail.com…..thanks in advance…:)

By: row

row — Sat, 01 Jun 2013 08:28:25 +0000

am having exam on monday 3rd june, plz can any 1 send me the latest dumps, and 1 more thing where ill get VCE new version software?? plz guide me…my mail id ruchibk043@gmail.com…..thanks in advance…:)

By: Trainer

Trainer — Sat, 01 Jun 2013 03:21:16 +0000

In the exam, what MUST we choose in Q6, B & E? I agree with everyone that it SHOULD be A & B though.

By: Alex

Alex — Thu, 23 May 2013 05:12:48 +0000

Jesus I am Alex, look before connecting a new switch to an existing vtp domain, reset the new switch´s VTP revision number to 0, for that reason the vtp client has a higher revision number than the vtp server is not possible if everything is working well

By: JamesD.

JamesD. — Mon, 13 May 2013 15:36:58 +0000

I think the CCNA pass!

By: CTTC Academy

CTTC Academy — Tue, 07 May 2013 09:29:25 +0000

Question number 9 is correct because when a switch running vtp mode client command received an advertisement from another switch in the network so it will process the advertisement and it will forward the advertisement to other vtp clients. The same way a human hear something and process it and then speaks so this is the way CISCO VTP CLIENT Mode Operate

By: ehasima

ehasima — Mon, 06 May 2013 10:55:11 +0000

I failed my exam. please send me the latest dump in “ehasima@hotmail.com”

thanks a lot…

By: chocolat02

chocolat02 — Fri, 26 Apr 2013 03:18:23 +0000

all dump that i download only give me 5 question but please anybody tell me how to have the entire questions? akimchocolat@yahoo.fr

By: Riko

Riko — Sat, 13 Apr 2013 21:08:13 +0000

@tt
you’ve to download the vce and it’s crack ,, try to get the latest version

By: tt

tt — Sun, 07 Apr 2013 00:53:30 +0000

I need help to open the dump spike or shekter getting only 5 trial copy pls .

By: jesus

jesus — Thu, 04 Apr 2013 15:51:11 +0000

Hi everybody,I am Jesus.I have a question.
When a switch is configured as a vtp server,and we have another switch configured as a vtp client.If the vtp client has a higher revision number than the vtp server,the vtp client will update the vlan.dat of the vtp server.We know both switches have the same vtp domain and vtp password.
According to the theory,vtp server updates vlan database of vtp client.I want to know if this case is an exception.
Please,your comments.

By: P

Fri, 29 Mar 2013 20:17:07 +0000

Hello

I think Question 9 is incorrect..
The VTP Client can in fact Originate Summary Advertisements:

From the Cisco Course content: CCNA 3 LAN Switching and Wireless: Chapter 4, Section 4.2.3.3

VTP Advertisements

Summary Advertisements

The summary advertisement contains the VTP domain name, the current revision number, and other VTP configuration details.

Summary advertisements are sent:

Every 5 minutes by a VTP server OR CLIENT to inform neighboring VTP-enabled switches of the current VTP configuration revision number for its VTP domain

By: God's Favour

God's Favour — Tue, 26 Mar 2013 17:20:22 +0000

9 TUT i cant say Thank you enough. Did my exam today..just revised using your materials and nailed it with 881. Am now starting CCNP… from tomorrow.And anyone going to do the exam, just read the questions twice, even if they seem easy. It worked for me.
God bless

By: GJ

GJ — Tue, 26 Mar 2013 06:09:53 +0000

For Q6) Two ways of configuring vlans

switch# configure terminal
switch(config)# vlan 5
switch(config-vlan)# name ENG

switch# vlan database
switch(vlan)# vlan 5 name ENG
switch(vlan)# apply
switch(vlan)# exit

By: Me too

Me too — Thu, 21 Mar 2013 03:02:07 +0000

None but similar to VTP sim

By: rock

rock — Tue, 19 Mar 2013 13:55:49 +0000

any ques from this???

By: rock

rock — Tue, 19 Mar 2013 13:55:19 +0000

yes the explanation is right

By: Roy

Roy — Mon, 18 Mar 2013 20:50:07 +0000

@Q6

Well, there are 3 correct answers for this question: A, B and E :) But…

“SWITCH(vlan)#” IS a CORRECT config mode. You enter this mode by “vlan database” command from privileged mode. However, this command is being DEPRECIATED (you can’t even see it in available commands by entering “?” from privilege mode).

Nevertheless, I would choose A instead of E. According to Cisco, it is RECOMMENDED to configure VLANs from config mode.

By: Q6

Q6 — Sat, 16 Mar 2013 13:15:28 +0000

Isn’t correct answer in Q6 – A and B ??, because (vlan)# is not a valid configuration mode. And (config-if)#switchport mode access vlan 50, will automatically create vlan that is not active.

By: Anonymous

Anonymous — Wed, 13 Mar 2013 20:29:36 +0000

Any Question of VTP is in the exam??

By: shshoor

shshoor — Fri, 01 Mar 2013 23:26:03 +0000

@ jah rastafarai
i have the same ques in the exam . that ques is from the new update question from the pre membership from 9 tut

By: Jah Rastafarai

Jah Rastafarai — Wed, 27 Feb 2013 22:09:24 +0000

Passed CCNA, question 1 modified from here, comparing 2 switches, one server, one client, both without VTP Domain names, confusing answers.

By: kevin karl

kevin karl — Wed, 20 Feb 2013 21:14:54 +0000

I need assistance for this vtp question -from the usual diagram-; Out of which port on a Sw-Ac3 would a frame containing an IP packet with destination address that is not on a local LAN be forwarded?

By: StudyMan

StudyMan — Wed, 20 Feb 2013 07:15:35 +0000

@Marin Whoever has the highest revision (whether it is Server or Client) will update the VLAN info of the domain.

By: Marin

Marin — Tue, 19 Feb 2013 20:20:24 +0000

Can you tell me, if a VTP SW Server can learn from a VTP SW client?

Note that, the revision number of VTP Client is greater than revision number of VTP server

By: BigGuy5002

BigGuy5002 — Fri, 08 Feb 2013 01:10:04 +0000

ok, I believe I misread Q6 and thought there was an interface that needed to be added too…. you right 9tut… if no int needs to be added to the vlan then E is the correct answer.

By: BigGuy5002

BigGuy5002 — Fri, 08 Feb 2013 00:50:50 +0000

Dear 9tut, Q6 correct answer should be A&B

check this out

Switch(config)#int f0/10
Switch(config-if)#no shut
Switch(config-if)#sw
Switch(config-if)#switchport ?
access Set access mode characteristics of the interface
mode Set trunking mode of the interface
native Set trunking native characteristics when interface is in
trunking mode
nonegotiate Device will not engage in negotiation protocol on this
interface
port-security Security related command
priority Set appliance 802.1p priority
trunk Set trunking characteristics of the interface
voice Voice appliance attributes
Switch(config-if)#switchport acc
Switch(config-if)#switchport access ?
vlan Set VLAN when interface is in access mode
Switch(config-if)#switchport access vlan ?
VLAN ID of the VLAN when this port is in access mode
Switch(config-if)#switchport access vlan 50
% Access VLAN does not exist. Creating vlan 50
Switch(config-if)#
Switch(config-if)#do sh vlan

VLAN Name Status Ports
—- ——————————– ——— ——————————-
1 default active Fa0/8, Fa0/9, Fa0/11, Fa0/12
Fa0/13, Fa0/16, Fa0/18, Fa0/19
Fa0/20, Fa0/21, Fa0/22, Fa0/23
Fa0/24, Gig1/2
2 Marketing_Dep active Fa0/1, Fa0/2, Fa0/3, Fa0/4
3 Sales_Dep active Fa0/5, Fa0/6, Fa0/7
50 VLAN0050 active Fa0/10
1002 fddi-default act/unsup
1003 token-ring-default act/unsup
1004 fddinet-default act/unsup
1005 trnet-default act/unsup

please update… thanks :)

By: PMT

PMT — Thu, 31 Jan 2013 22:36:33 +0000

If anyone has the latest lab sims, please email them to pmt44@live.com. I am taking CCNA exam next week. Thank you in advance..:)

By: Renolph

Renolph — Tue, 29 Jan 2013 01:50:48 +0000

guys which of following is a characteristic of full-duplex communication?

A it is CSMA/CD network

B it is CSMA/CA network

C it is point to point only

D hub communication is done via full duplex

i think answer is B,any suggestion and views here?

By: 9tut

9tut — Mon, 28 Jan 2013 10:10:11 +0000

@Grendel: Yes, thanks for your detection. I updated it!

By: 9tut

9tut — Mon, 28 Jan 2013 10:05:57 +0000

@rick: Please use the “show mac address-table” command instead (without first “-”).

By: rick

rick — Mon, 28 Jan 2013 05:47:05 +0000

@xallax or any one who is master in networking,
hello friends can anyone tell me the alternate command for sh mac-address-table because this commands sometimes does not work in ccna exam…..rock3400@gmail.com

By: Grendel

Grendel — Mon, 14 Jan 2013 14:28:03 +0000

@9tut, Q6 from this page needs to also be corrected in the flash quiz 1. Correct option in the quiz indicate Switch(vlan)#vtp server but it should actually be Switch(config)#vtp mode server.

By: Redundant Request

Redundant Request — Sat, 12 Jan 2013 02:39:19 +0000

I’m not sure if there is a guy (or most likely an attractive babe) going out and giving out the latest dumps, if you exist, will you please email me the “latest” dumps to frankyestrada12@gmail.com. I promise I am studying really hard, but I just cant afford to fail my upcoming exam on the Jan 28th. My current employer has given me an deadline until the end of January 2013 to get Cisco certify. (a one month notice). This will be my only opportunity to get into networking from desktop support. I have been studying networking in the past, but Cisco networking is on a whole different level. I would really appreciate any help or suggestions! Thank you!

By: Agtrk

Agtrk — Sun, 06 Jan 2013 18:15:25 +0000

Q2 For A : Hi Ankit .I think that switch in client mode doesnt create any own database so it doesnt have a local database . Just so It has a database but this database is learned information from server. Not local or own database.

By: Ankit

Ankit — Fri, 04 Jan 2013 07:00:18 +0000

Hey Friends in Q2 the option A is incorrect according to me …bec in client mode the switch can update its database……….i read the tutorials too and it also conveyed it…
..

By: IMMANUEL P

IMMANUEL P — Thu, 03 Jan 2013 15:48:34 +0000

HI GUYS iam planning ccna exam next week. kindly ccna 640-802 dumps and lab sim send to my email id : p.immanuel@ymail.com

thanks

By: Daniel L

Daniel L — Sat, 29 Dec 2012 15:51:18 +0000

Hey Anonymous read this: anwer and experimental in there:
http://www.certskills.com/nww/vtp-issues.pdf

By: Anonymous

Anonymous — Fri, 28 Dec 2012 07:58:48 +0000

hi frinds i have a Q> Suppose there are 2 switches and everything is working fine. Server has revision no 2 and few vlans. while client has revision no. 7 with some other vlans configured. What will happen? server will wipe clients vlans(though its revision no is smaller), or client will overwrite server because it has higher revision no.
pls help .
thanx

By: Daniel L

Daniel L — Sun, 23 Dec 2012 15:28:43 +0000

@suresh
E. Switch(vlan)# vlan 50 not a correct command syntax.
It should be : Switch(config)#vlan 50

@Warren
A is a correct.

By: little time

little time — Wed, 19 Dec 2012 18:00:25 +0000

@ DanielL i cant agree with you more. The cowboy had gotten it wrong.

By: Daniel L

Daniel L — Wed, 19 Dec 2012 16:29:44 +0000

@cowboy -Vlan 1, 1002,1003,1004,1005 are default vlan . Normal vlan are used from 2-1001 and extended range 1006-4095

By: cowboy

cowboy — Wed, 19 Dec 2012 03:46:35 +0000

what vlans are used for normal operations?->new qn

Answer is 2-1005

By: cowboy

cowboy — Wed, 19 Dec 2012 03:42:32 +0000

1 new qn from VTP..

how vtp advertisements are sent across network
options -mc,bc,uc and anycast
answer is multicast

By: basanna

basanna — Sat, 15 Dec 2012 13:38:18 +0000

Q.11

What do you mean by the statement, “Also in this mode, no trunking is created ” (from explanation section)?

Set the mode of a switch to transparent and tried to make a port as trunk port and could do it successfully…. Is this what the above statement contradicting?

Can some one resolve the confusion ?