Comments on: Configure Static Route – GNS3 Lab

By: Ilkin

Ilkin — Mon, 20 Apr 2015 10:24:59 +0000

my email is ilkin.zeynalovich@gmail.com . please send me dump for excamen CCNA

By: jenny

jenny — Mon, 09 Mar 2015 11:14:23 +0000

what is the commands for configuring the ipv6 in gns3
also how to assign the ipv6 address in sysyem and process ping

By: Anonymous

Anonymous — Tue, 17 Feb 2015 14:20:32 +0000

Hi,
Why R0#ping 172.16.0.2 not succeed ?

By: aznkoolguy

aznkoolguy — Mon, 10 Nov 2014 03:03:37 +0000

Someone please sent me the lastest ccna dump. My email aznkoolguy69@hotmail.com

By: Anonymous

Anonymous — Thu, 18 Sep 2014 12:51:29 +0000

its very good and informative website

By: irfan

irfan — Thu, 10 Apr 2014 12:30:12 +0000

this is very good topic it he;lp me alot for understanding static routing thanx alot

By: Anonymous

Anonymous — Thu, 19 Sep 2013 05:41:30 +0000

hiiiii,
this is tumendra bisen. i am preparing the ccna certification exam. if you have latest dumps and sumulator so plz send me on my email
tumendra24bisen@gmail.com.so that i can prepare 100%.

By: Stoan k

Stoan k — Tue, 25 Jun 2013 10:21:51 +0000

This site is helpful indeed,i’ve been out f class 4 a while due 2 work commitments bt nw i cn catch up coz f dis mouth watering tutoria. Thanx CCNA family

By: ANONNYOS

ANONNYOS — Wed, 05 Jun 2013 14:46:57 +0000

voila mon e-mail hassanefes@hotmail.com

By: ANONNYOS

ANONNYOS — Wed, 05 Jun 2013 14:45:46 +0000

j’ai deux routeurs et deux virtuel box guest et j’arrive pas a les router avec un routage statique pouvez vous m’aidé et merci d’avance ^^

By: friendlywind

friendlywind — Fri, 10 May 2013 07:36:06 +0000

Hi All I have got my ccna icnd1 exam coming up on thr 25th of may, can you please send the latest brain dump to me my email is

friendlywind@gmail.com

Thank you in advance.

By: Ahsan

Ahsan — Tue, 02 Apr 2013 11:04:50 +0000

Good Examples with Picture :) Thanku

By: MICKAL

MICKAL — Tue, 26 Mar 2013 13:12:43 +0000

THANKS 9TUT

By: jaser

jaser — Tue, 19 Mar 2013 08:52:07 +0000

thanks 9tut

By: willkoolz

willkoolz — Tue, 30 Oct 2012 06:41:24 +0000

Check out GNS3 workbench…it has training and a fully loaded ubuntu 10.10 vmware image preloaded w/ ccna labs, GNS3 and documentation.

http://rednectar.net/gns3-workbench/

This is what I use plus when you add this to 9tut, you are set. Peace

By: monty

monty — Mon, 08 Oct 2012 09:48:34 +0000

I do it with both GNS 3 and packet trace but it does not work good I dont know what is the problem?

By: Hi

Hi — Fri, 27 Jul 2012 19:15:42 +0000

dear all i am need ccna latest dumps if any one have then please send me on my email id

jamilshah_2005@yahoo.com

thanks

regards
Jamil shah Afridi

By: Jervy

Jervy — Tue, 03 Jul 2012 13:31:13 +0000

@Rahul nice observation
@Health, really you didn’t specify what ip configuration you put to your host A and B

By: Deva

Deva — Sun, 04 Mar 2012 12:00:04 +0000

Can anyone send ccnp materials to my id devendrangr at yahoo.in inorder to take the exam.

By: RAJEN

RAJEN — Wed, 25 Jan 2012 20:01:15 +0000

hi!!!!!! 9tut

which type tutorials will come in CCNA exam?

&
Plz send me latest dums plz

rajenpatel30189@gmail.com

By: Rahul

Rahul — Wed, 07 Dec 2011 13:48:32 +0000

@Health:- add default gateway (router ip to which pc connected) in your pc .

By: Rahul

Rahul — Wed, 07 Dec 2011 13:47:52 +0000

add default gateway (router ip to which pc connected) in your pc .

By: xallax

xallax — Sun, 20 Nov 2011 08:46:23 +0000

@jeff
well, here’s something interesting:
http://sourceforge.net/projects/gns-3/files/GNS3/0.5/GNS3-0.5-tutorial.pdf/download

By: Jeff2

Jeff2 — Mon, 26 Sep 2011 09:11:15 +0000

Hey xallax, you should create a video tutorial or something about gns3 along with your package (if it doesn’t have one yet).

By: xallax

xallax — Sun, 25 Sep 2011 19:26:25 +0000

@jeff
you could try adding a vmware machine as test computer
you could add several vmware machines as test computers!
you could add as many vmware machines as you like :)

By: Jeff2

Jeff2 — Sun, 25 Sep 2011 19:14:23 +0000

I am trying GNS3 now after using PT extensively. Does the loopback address kind of “simulate” a host on the LAN behind those routers? For PT, we can add a PC on both ends of those routers and then try to ping each other. For GNS3, the alternative would be a loopback address or another router?

By: Sascha

Sascha — Tue, 19 Jul 2011 15:20:53 +0000

Hi heath,

static routes are only “point to point” routes. you cant ping from a host on router a to a host on router b. to get this working you have to enable any routing protocol f.e. ripv2.

greets

By: Heath

Heath — Tue, 21 Jun 2011 12:05:40 +0000

Hi,

Perhaps a really silly question, I have this set up in GSN3 – Im hooking up 2 vmware devices (ubuntu boxes), I can ping router one and router two using the external ips.

router a cisco 7200
interface fe 0/0 10.0.0.2
interface fe 1/0 192.168.3.1

router b cisco 7200
interface fe 0/0 10.0.0.1
interface fe 1/0 192.168.2.1

I did the static routing of this:
Router A(config)#ip route 192.168.2.0 255.255.255.0 10.0.0.1

Router B(config)#ip route 192.168.3.0 255.255.255.0 10.0.0.2

I can ping A from B using:
router a#ping 192.168.2.1
and
router b#ping 192.168.3.1

I can also ping the VMARE boxes
from their respective routers (and I can ping the respective routers from computers)
(comp_a router_a router_b comp_b)
but comp_a cannot ping comp_b and vica versa.

Any ideas?

By: 9tut

9tut — Sun, 12 Jun 2011 01:05:09 +0000

@Sidheek Mohammed: We don’t need to use loopback when doing static routing. The two loopback interfaces here are just used to illustrate 2 far-away networks. If we don’t use these 2 loopback interfaces we have to add 2 more routers to test the static route commands.

By: Sidheek Mohammed

Sidheek Mohammed — Sat, 11 Jun 2011 17:32:46 +0000

Why we implemented LOOPBACK here ???we were trying only static routing ?? Is it necessary to do loopback when we do static routing ???

By: Savun

Savun — Wed, 25 May 2011 11:24:18 +0000

Hi, every one.I am savun I need to do CCNA exam, but not sure to pass.
so please comment to me. How I can to do for CCNA certificate. thanks for all………..

By: sfurtila

sfurtila — Tue, 24 May 2011 08:01:32 +0000

some one send me latest ccna and ccna security dump please….

sfurtila@yahoo.com

By: Neon

Neon — Tue, 26 Apr 2011 02:49:39 +0000

Please respond if anyone has the latest dumps as of April lastweek

By: Ashwin patel

Ashwin patel — Tue, 19 Apr 2011 02:05:48 +0000

can i have latest ccnp (Routing dumps
)

By: NanaKoma

NanaKoma — Mon, 11 Apr 2011 10:41:51 +0000

This site has been very helpful to me. I have six weeks to write my CCNA and any suggestions and current dump will be helpful. email: nanaluv32@yahoo.com. Thank you very much.

By: sunex

sunex — Wed, 30 Mar 2011 18:37:06 +0000

my email is sunexy049@yahoo.com Thanks. will be expecting

By: sunex

sunex — Wed, 30 Mar 2011 18:32:19 +0000

dumps for CCNA plssssssss

By: sunex

sunex — Wed, 30 Mar 2011 18:30:44 +0000

cant GNS3 work on window 7 and vista? pls if it can, can you let me know how to go about it. i will be grateful if i can get latest dumps. Thank

By: ADEKUNLE

ADEKUNLE — Sun, 27 Mar 2011 14:56:02 +0000

please can i have latest CCNA DUMP?

By: Manoj

Manoj — Sat, 19 Mar 2011 06:36:57 +0000

i comleted CCNA just 15 days ego anybody helps me for pass the exam?

By: shashi

shashi — Thu, 17 Mar 2011 21:40:55 +0000

very helpful for me.
Can you please add complete voice based training ?

By: Veeresh

Veeresh — Tue, 15 Mar 2011 05:36:32 +0000

Can I have Latest CCNA Dumps.

My Mail-id is – bv.veeru@hotmail.com

By: Silvester Rajpaul

Silvester Rajpaul — Sat, 19 Feb 2011 06:57:02 +0000

ya easy to get the resulssssssssssss!!!!!!!!!

By: m1k3

m1k3 — Thu, 20 Jan 2011 19:38:22 +0000

@rasha: maybe u forgot to set the clock rate to the DCE side..

By: jobin

jobin — Wed, 19 Jan 2011 11:23:29 +0000

Good Article it helped me!!

By: 9tut

9tut — Wed, 08 Dec 2010 01:26:17 +0000

In fact, there is no difference when applying this lab in packet tracer.

By: rasha

rasha — Tue, 07 Dec 2010 15:34:01 +0000

can apply this lab in packet tracer……please :)