Comments on: New CCNA – Drag and Drop 1

By: Neptune

Neptune — Fri, 29 May 2015 12:12:19 +0000

Hi i’ve exam next 15 june, could someone send me the last vce file? thanks!
Neptune7@libero.it

By: sharon

sharon — Mon, 25 May 2015 07:45:28 +0000

anyone with the latest VCE? tts.baloyi@gmail.com

By: Anonymous

Anonymous — Mon, 25 May 2015 07:44:56 +0000

anyone with the latest VCE?

By: Anonymous

Anonymous — Wed, 20 May 2015 20:39:55 +0000

kindly send me dumps on mohamadfouard@yahoo.com. I am due to write my exams End of this month.
Best Regards!

By: Hicham

Hicham — Tue, 19 May 2015 19:28:09 +0000

I Need help for ccna exam. Could anyone please send me dumps at golf1214@yahoo.com Thank you for your time!

By: Anonymous

Anonymous — Thu, 14 May 2015 19:58:09 +0000

Kindly send me dumps on gmboya12@yahoo.com

By: Note: Because routes are not being added to the configurations, you will not be able to ping through the internetwork. All devices have cable autosensing capabilities disabled. All hosts are PC’s

Thu, 14 May 2015 12:17:26 +0000

Note: Because routes are not being added to the configurations, you will not be able to ping through the internetwork.

All devices have cable autosensing capabilities disabled.

All hosts are PC’s

By: Anonymous

Anonymous — Thu, 14 May 2015 12:17:16 +0000

Note: Because routes are not being added to the configurations, you will not be able to ping through the internetwork.

All devices have cable autosensing capabilities disabled.

All hosts are PC’s

By: enoch

enoch — Fri, 08 May 2015 11:53:13 +0000

Please send me dumps at
mirasol_enoch@yahoo.com

By: Chris.

Chris. — Thu, 30 Apr 2015 21:18:15 +0000

for those of you confused by the subnetting of the 188 VS 189 on a /30

The reason is because in a /30
188 is the Network Address (Network marker, unusable)
189 is the first usable IP address.
190 is the last usable address.
191 is the broadcast address
In ANY subnet you MUST subtract 2 (Network Identifier address and broadcast address)

/30 = 4 addresses – 2 = 2
/31 = 2 addresses – 2 = 0 …… so a /31 is 100% unusable which is why /30′s are used on Serial connections.

By: sarim

sarim — Thu, 30 Apr 2015 08:08:48 +0000

Kindly send the latest dumps at sarim70@gmail.com or any helpful material for MCQs

By: y@sky

y@sky — Wed, 29 Apr 2015 00:56:39 +0000

any one have Q6 in the exam

By: y@sky

y@sky — Wed, 29 Apr 2015 00:55:46 +0000

Q6 make me distracted , it is too long

By: G

Tue, 28 Apr 2015 20:52:11 +0000

hi can you help me, please send me the latest dumps to gurjit2020@yahoo.com thank you!

By: Anonymous

Anonymous — Mon, 20 Apr 2015 12:24:46 +0000

i cleared my exam with success i studied from the below mentioned site

hear they provide latest and updated materials anyway thanks to all
site : E=x=a=m=d=u=m=d . N=e=t

By: kris

kris — Sun, 19 Apr 2015 15:10:46 +0000

My email is kriskkiyer@gmail.com. … please send me latest dumps if any

By: Hilla

Hilla — Thu, 02 Apr 2015 12:29:29 +0000

kindly send me latest dumps.i am preparing for my exam next month

By: Rock

Rock — Thu, 26 Mar 2015 18:10:54 +0000

i want to know if i purchase any dumps whether it will be helpful ……..from where i would purchase and one more thing after purchase how many days it will valid…..kindly suggest me …mail me contacttorock@gmail.com……thanks..

By: MehD

MehD — Wed, 11 Mar 2015 15:46:06 +0000

would anyone pls send me the latest dumps : s.mahdiamiri@outlook.com
i’ll take the exam next month

By: Anonymous

Anonymous — Mon, 09 Mar 2015 21:21:31 +0000

can someone please send me the latest dump to mparilis1@optonline.net thanks

By: Seyi38

Seyi38 — Sat, 07 Mar 2015 10:07:25 +0000

Pls someone should help me with latest 200-120 dumps. email is xplicit38@gmail.com. Thanks in advance

By: PurdueAlum

PurdueAlum — Sat, 28 Feb 2015 20:41:31 +0000

I’m still confused with the last question…why on left router’s Fa0/0 .190/28 is selected when the usable ip addresses in main router’s Fa0/0 ranges from .177 to .191/28

By: Vishwajeet

Vishwajeet — Sat, 28 Feb 2015 17:30:59 +0000

If I pass on Monday using the site, I will generously donate :)

By: Sue

Sue — Fri, 30 Jan 2015 04:30:40 +0000

Q1.
16host = /27 = 32 increment
IP address range
.0~31
.32~63
.64~95
.96~127
.128~159 (192.168.164.149/27 is in this address range)
next address starts from .160

host11 = /28 = 16 increment
.160~175 (192.168.164.66/28 is in this address range)
next add starts from .176

host5 = /29 = 8 increment
.176~183 (192.168.164.178/29 is in this address range)
next add starts from .184

Serial connection = host2 = /30 = 4 increment
.184~187
.188~191 (192.168.164.188/30 is the network address, 192.168.164.189/30 is the first usable address for host. so this explains why we have to use .189 add!!)

By: zaidi

zaidi — Tue, 27 Jan 2015 13:36:07 +0000

@Anonymus
Left side and right side router’s interaces connected to hosts are obviously from the same subnets in which host exist, to choose ips of interfaces connected to main router we need to check running config of main router. The ip from the same subnet should be on the other sides of main routers.

By: Anonymous

Anonymous — Fri, 16 Jan 2015 18:23:56 +0000

Please explain asap

By: Anonymous

Anonymous — Fri, 16 Jan 2015 18:22:51 +0000

This question is regarding the last query here ie question 6,Is there any rule of choosing only ip addresses close to subnet end as the Admin could have used. 161 and.177 ip addresses

By: TestTaker

TestTaker — Wed, 14 Jan 2015 08:50:52 +0000

And just to be clear, ip subnet-zero does make all addresses assignable so even if .188 would be a network address, it can still technically be valid for a host if use of subnet-zero is enabled.

By: TestTaker

TestTaker — Wed, 14 Jan 2015 08:47:33 +0000

Can someone explain Q1?

If the ip subnet zero command is used then why can’t /28 be used for both the Floss and Tooth networks, and even /31 be used for Floss S0/0?

Otherwise MarkUp’s point is valid.

I also don’t understand the question and furthermore why .189 is correct versus .188.

Please help @9tut!!

By: OronDavid

OronDavid — Wed, 31 Dec 2014 23:56:15 +0000

Question 6 – It is true that address 192.168.152.177/28
Suitable for the left router instead 192.168.152.190/28
Because they are from the same range ??

By: MarkUp

MarkUp — Wed, 31 Dec 2014 06:07:09 +0000

For Q1:

The last network is 192.168.164.178 /29 increment of 8 and increment of /30 is 4 right?

so the network range is 192.168.164.178 – 192.168.164.185 –> inc=8 for /29

for the /30 it would be 192.168.164.186 – 192.168.164.189 –> .189 is the broadcast add

then .188 should be the answer? Can someone please explain this to me? I can’t get Q1. TIA

By: dingleberry

dingleberry — Tue, 30 Dec 2014 15:41:45 +0000

Q2 gives the following as answer:
1) enable
2) configure terminal
3) hostname
4) Interface vlan 1
5) no shutdown
6) ip address
7) ip default-gateway

But I have been taught since the year 2000 to configure the IP address after the interface command followed by default gateway and then use no shutdown. So in effect it would be

1) en
2) conft
3) host
4) Int vlan 1
5) ip add
6) ip default-gateway
7) no shut

They work just fine, so would I lose marks if I did it this way?

By: T.T

T.T — Sat, 27 Dec 2014 12:48:07 +0000

Oh yes, Nishant, u r right.
I mix up access-list (subnet mask & wildcard mask) in cisco route/switch and PIX/ASA.

This is output on a real 2960 switch for ur reference, thx for help!!

Switch(config)#access-l ?
IP standard access list
IP extended access list
IP standard access list (expanded range)
IP extended access list (expanded range)
dynamic-extended Extend the dynamic ACL absolute timer
rate-limit Simple rate-limit specific access list

Switch(config)#access-l 100 permit ip 1.1.1.1 ?
A.B.C.D Source wildcard bits

Switch(config)#access-l 100 permit ip 1.1.1.1 255.255.255.255 ?
A.B.C.D Destination address
any Any destination host
host A single destination host

Switch(config)#access-l 100 permit ip 1.1.1.1 255.255.255.255
% Incomplete command.

Switch(config)#access-l 100 permit ip 1.1.1.1 255.255.255.255 any
Switch(config)#do sh ip access-l
Extended IP access list 100
10 permit ip any any
Switch(config)#access-l 100 permit ip 1.1.1.1 0.0.0.0 any
Switch(config)#do sh ip access-l
Extended IP access list 100
10 permit ip any any
20 permit ip host 1.1.1.1 any
Switch(config)#

By: Nishant

Nishant — Fri, 26 Dec 2014 23:19:24 +0000

@ T.T Access list can ONLY be applied on Router . Switch is layer 2 device . It say to deny HOST 192.168.125.34 and to match it You have to use wild case mask that would match the exact IP address (0.0.0.0). I hope that make sense to you.

You dont need to use any and below is right config . As it would tell router to discard all protocols (TCP,UDP,ICMP) for this host. Try it in SIM and it will not give you option for ANY

router: access-list 100 deny ip 192.168.125.34 0.0.0.0

I hope i am clear as MUD. LOL

By: T.T

T.T — Thu, 25 Dec 2014 08:16:27 +0000

Q4, to deny a host with the address of 192.168.125.34/27 to access anywhere except its own subnet, but it did not mentioned it was implemented on router or switch. How to determine subnet mask or wildcard mask should be used? Any idea?

[access-list 100 deny protocol address mask any]
router: access-list 100 deny ip 192.168.125.34 0.0.0.0 any
switch: access-list 100 deny ip 192.168.125.34 255.255.255.255 any

By: T.T

T.T — Thu, 25 Dec 2014 08:08:01 +0000

Pls send me the lastest ccna dumps
ttlottlo@yahoo.com.hk
Thx a lot!!

By: rob

rob — Mon, 22 Dec 2014 02:50:20 +0000

I am looking for cisco packet tracer, please send me a link bdmoni@hotmail.com thank you

By: Raya

Raya — Mon, 08 Dec 2014 09:59:57 +0000

please send me latest dumps at raya_aladwan_91@yahoo.com

By: Anonymous

Anonymous — Wed, 03 Dec 2014 21:04:22 +0000

pls guys ,,, i am going to take CCNA exam next week,,, latest dumps and VCE too ,,, if you have sites you know where VCE and lates dumps available, pls send me too ,,, my email address is tamratalemayehu@gmail.com

By: anonymous

anonymous — Mon, 01 Dec 2014 10:37:25 +0000

my email address is nmyoungp@gmail.com
thanking you in advance

By: anonymous

anonymous — Mon, 01 Dec 2014 10:36:00 +0000

please send me latest ICND2 braindumbs anyone
my exam is wedne the 3rd please help

By: Anonymous

Anonymous — Mon, 01 Dec 2014 03:08:12 +0000

anyone who want latest ccna dumps for free or any doubt on any question can contact me
i am ready to help
currently i m ccie security pursuing
skype id:ajaygilly1
facebook:ajaygrewal007@gmail.com or ajaygilly
gmail:ajayajay16@gmail.com

By: venkat

venkat — Fri, 21 Nov 2014 08:13:09 +0000

please send me latest dumps
sairam.paripati@gmai.com

By: Hamza

Hamza — Sat, 15 Nov 2014 23:46:33 +0000

Hi everyone ,can you please email me the latest dumps for CCNA in my email address
Thanks and God Bless
hamizo@gmail.com

By: Richard

Richard — Sat, 08 Nov 2014 06:34:15 +0000

for the question6,all the routers in the sim do not have serial 0/0port.
Is there any way to resolve?

By: ajikemi35

ajikemi35 — Mon, 27 Oct 2014 21:58:17 +0000

Anonymous; did you, or anyone you know encountered any drag and drop in the exam. Thanks

By: Anonymous

Anonymous — Mon, 27 Oct 2014 21:53:21 +0000

Anonymous; did you, or anyone you know encountered any drag and drop in the exam. Thanks

By: Dereje

Dereje — Mon, 27 Oct 2014 16:16:07 +0000

Anonymous
Thank you!!

By: Anonymous

Anonymous — Thu, 16 Oct 2014 13:04:30 +0000

0.0.0.127 bad brackets… jejeje

By: Anonymous

Anonymous — Thu, 16 Oct 2014 13:03:23 +0000

Dereje

Examples:
With wildcard 0.0.0.1 – binary 11000000 : 10101000 : 00100011 : 0011011(1) two host
With wildcard 0.0.0.3 – binary 11000000 : 10101000 : 00100011 : 001101(11) four host
With wildcard 0.0.0.127 – binary 11000000 : 10101000 : (00100011 : 00110111) 128 host
Note that bits between brackets are the host bit and the rest the network bits

Now

With wildcard 255.255.255.255 – binary (11000000 : 10101000 : 00100011 : 00110111) all host
With wildcard 0.0.0.0 – binary 11000000 : 10101000 : 00100011 : 00110111 one host

255.255.255.255 = any
0.0.0.0 = host

http://www.cisco.com/c/en/us/support/docs/security/ios-firewall/23602-confaccesslists.html

Quote

“Note these ACL equivalents.
The source/source-wildcard of 0.0.0.0/255.255.255.255 means “any”.
The source/wildcard of 10.1.1.2/0.0.0.0 is the same as “host 10.1.1.2″.”

By: Dereje

Dereje — Thu, 16 Oct 2014 10:30:15 +0000

Crazydina

what is the logic or concept that makes 192.168.35.55 0.0.0.0 = host 192.168.35.55 this statement equal. can you explain

Wildcard mask 0.0.0.0 means in other words it means any subnet/subnetwork/ network.

so but the user is in /28 subnet. so it has to be presented in 0.0.0.15

By: Crazydina

Crazydina — Wed, 15 Oct 2014 17:23:13 +0000

Dereje October 14th, 2014

192.168.35.55 0.0.0.0 = host 192.168.35.55

In wildcard each 0 means that the equivalent bit must match.

By: Dereje

Dereje — Tue, 14 Oct 2014 11:10:37 +0000

9tut I have a questions.
Question 3 I think the answer is not correct.

2) deny ip 192.168.35.55 0.0.0.0 host 192.168.35.66

questions block a user from the albama e0 network from accessing the Accounting Server.

ok! I accept the host 192.168.35.55 because it is in network range /28

but my questions is what is the wild card mask 0.0.0.0
it has to be 0.0.0.15
please explain

By: skul

skul — Sat, 11 Oct 2014 18:07:36 +0000

This site has genuine and enough material, not only to pass the CCNA exam but also to understand the basic networking concept.

Thanks 9tut.

There is no need to go for any dump or VCE just read and understand all the question of this site one time.
Best of luck

By: kingkouka

kingkouka — Thu, 25 Sep 2014 11:21:57 +0000

Please guys, howr where can I download Packet Tracer ? Can someone have a link for this?
Please send it to me at jmn81ma@yahoo.fr
Ohter questions: how to process to do the Labs from this web page?

By: please

please — Tue, 09 Sep 2014 19:39:37 +0000

Hi im going to take ccna this sept please can someone send me latest dumps dyelldelrosario@gmail.com

By: asfer alam

asfer alam — Mon, 08 Sep 2014 04:03:24 +0000

Pls give me latest dumps of icnd2.i have an exam on next monday.my E-mail id is asferalam@gmail.com

By: million

million — Mon, 01 Sep 2014 08:51:42 +0000

guys pls i need latest dump i have an exam next monday

By: mimimiao

mimimiao — Fri, 29 Aug 2014 08:57:54 +0000

for question 1 , better explanation
http://www.examtut.com/2013/08/drag-drop-ip-address.html

By: ramos1987

ramos1987 — Mon, 18 Aug 2014 12:42:36 +0000

Oui #john , mais en tous t’ai en anglais.
J’ai commencé à bosser en l’anglais car l’examen
CCNA 200-10 est en anglais.

By: John

John — Sat, 16 Aug 2014 20:12:39 +0000

slt ramos1987. As tu deja trouvé les documents ?

By: Allan

Allan — Wed, 06 Aug 2014 01:50:24 +0000

Doing test in two days send me the dump to asnpap@gmail.com Pleaseeeee

By: akida

akida — Sat, 02 Aug 2014 16:57:07 +0000

my address akidaasao@gmail.com

By: akida

akida — Sat, 02 Aug 2014 16:56:19 +0000

kindly someone send me the latest dumps as am nearly doing the exams

By: Aymen Al-dulaimi

Aymen Al-dulaimi — Fri, 01 Aug 2014 22:28:37 +0000

pleas send for me latest dumps to aymenaldulaimi@yahoo.com
thank you

By: Deivanai

Deivanai — Wed, 30 Jul 2014 05:00:54 +0000

Pls mail me the latest dumps to sddevigd@gmail.com (free version)

By: ramos1987

ramos1987 — Wed, 30 Jul 2014 03:13:33 +0000

Hi dear member 9tut. I wonder if there is a French version of the CCNA 200-120 exam because I’d passed the exam in French. I live in Ivory Coast

By: Vhal

Vhal — Tue, 29 Jul 2014 16:08:41 +0000

Please send me some of the latest dumps to brandon_bautista2003@yahoo.com

Thank you in advance

By: Pratik

Pratik — Thu, 24 Jul 2014 21:24:45 +0000

Please send me latest dumps to pratikjoshidiu@yahoo.com

By: mohamed suleiman

mohamed suleiman — Wed, 23 Jul 2014 21:03:10 +0000

can you please send the latest dumps to moh.suleiman85@gmail.com

By: Tashy

Tashy — Wed, 23 Jul 2014 15:04:23 +0000

please send latest dumps to tashy4luv@hotmail.com. Thanks you

By: Deepu Varghese

Deepu Varghese — Wed, 23 Jul 2014 05:55:22 +0000

can you please send the latest dumps to deepu.varghese1989@gmail.com

By: Ahmad Dawood

Ahmad Dawood — Thu, 10 Jul 2014 01:00:10 +0000

Please send latest dumps to: a.dawood@alyasra.com

By: Anonymous

Anonymous — Sun, 06 Jul 2014 01:25:25 +0000

5252525252+62521929529+825928

By: Anonymous

Anonymous — Sun, 06 Jul 2014 01:24:42 +0000

96262

By: Danny

Danny — Tue, 24 Jun 2014 06:42:30 +0000

Any of these Qs in recent test? I know someone who recently passed this exam and said none of these particular drag & drop were there. Anyone else got these in particular?

By: dannyboy

dannyboy — Wed, 11 Jun 2014 21:29:15 +0000

please please please can anyone send me the new dumps :) thanks
dannyboy197222@hotmail.com

By: chilo

chilo — Tue, 10 Jun 2014 03:19:26 +0000

our task is to avoid host 192.168.15.34 having contact with any other network that’s why the mask is 0.0.0.0 and the host can still communicate in his network since he does not need to cross the router

By: Sam

Sam — Thu, 05 Jun 2014 15:40:09 +0000

Could Anyone help me with Q.4 the address and mask part please?

By: mac

mac — Tue, 03 Jun 2014 19:37:37 +0000

Does anyone have the VCE software compatible for MAC and the dumps that they could send to marcus.chaney3@gmail.com plllease!!