Comments on: New CCNA – OSPF Questions

By: Andy

Andy — Sat, 30 May 2015 21:15:25 +0000

hello,

anyone will the latest dumps, please help a brother.
razor2man@yahoo.com

thanks

By: Cochicor

Cochicor — Fri, 29 May 2015 14:12:11 +0000

Please send me the last ccna dump my exam is on june 4th please wish me luck cochicor1@hotmail.com

By: Compa

Compa — Sun, 24 May 2015 18:48:43 +0000

hi everyone, please send me latest CCNA dump to techcompa2015@gmail.com
thanks

By: Ni_nu

Ni_nu — Sat, 23 May 2015 14:27:56 +0000

Today I got Question 9 at the exam. they have assigned 172.16.x.x range ip address to the fast Ethernet interface and 1.1.1.1 and 2.2.2.2 to loopback 0 and 1 interfaces.
Be careful when you are answering..

By: ey

ey — Wed, 20 May 2015 06:45:44 +0000

New dumps ? please send alfredk1992@gmail.com

By: Anonymous

Anonymous — Tue, 19 May 2015 11:40:17 +0000

please can someone send me the latest CCNA dump? mj8mj4@hotmail.com

By: VaneCes

VaneCes — Mon, 18 May 2015 23:18:13 +0000

please send me latest CCNA dump to vera.cespedes20@gmail.com

By: Harish Siroha

Harish Siroha — Mon, 18 May 2015 08:41:48 +0000

please send me latest CCNA dump to harishkumarsiroha@gmail.com

By: Sibghat Khan

Sibghat Khan — Mon, 11 May 2015 20:26:55 +0000

Can somebody send me latest CCNA dumps to sibghat0@hotmail.com?

By: ajay chand

ajay chand — Tue, 28 Apr 2015 13:43:32 +0000

hii any one please sent ccna dump my email id ajaychandkhatima@gmail.com

By: doveman

doveman — Thu, 23 Apr 2015 09:20:08 +0000

hey guys anyone who have latest dump CCNA Exam, please help me out! dawitgrmay@gmail.com

By: AC.Vidoca

AC.Vidoca — Thu, 23 Apr 2015 03:56:37 +0000

Plz help me wit latest dumps and VCE too for CCNA . My exam on 8 next month. send me via email: acvidoca@ymail.com

By: Johnnyaich

Johnnyaich — Mon, 20 Apr 2015 17:53:33 +0000

I have just started looking at these questions for CCNA test prep, what are “dumps “that people are talking about?

By: Raju

Raju — Sat, 18 Apr 2015 04:04:18 +0000

@subodh & @Muhe
Jeremy is very good and I think you didn’t heard him clearly… It’s only a “HELLO” message to see if the neighbour/adjacent routers are still online/working or not, not the full routing table updates. Study well and good luck to all :)

By: SaedAdi

SaedAdi — Fri, 17 Apr 2015 15:55:22 +0000

Q6,8,10

By: Peter

Peter — Thu, 26 Mar 2015 15:07:09 +0000

By: eyemwired

eyemwired — Sun, 22 Mar 2015 14:24:00 +0000

i am not sure the answer is 4 , i have read 6?

By: Apush

Apush — Wed, 18 Mar 2015 12:05:50 +0000

Passed my CCNA exam today (18th Mar)… Q1, Q3 and Q9 in exam

By: subodh

subodh — Sat, 14 Mar 2015 06:15:59 +0000

@Muhe its not 30 min..its 30 seconds..
am i right??? ;)

By: BestwalL

BestwalL — Mon, 09 Mar 2015 14:39:25 +0000

I pass the exam tody.. all questions are from here. thx

By: Anonymous

Anonymous — Fri, 06 Mar 2015 23:36:18 +0000

Please anyone who can help me SPNGN2 CCNA Service Provider . Please help me ! Write me please to digital_score@yahoo.com

By: Shakti Kapoor

Shakti Kapoor — Fri, 20 Feb 2015 05:49:04 +0000

Auuu.. lolita

By: Che

Che — Mon, 16 Feb 2015 05:27:39 +0000

Q1, Q9, Q10 On 15th Feb.

By: polocom

polocom — Wed, 11 Feb 2015 20:57:38 +0000

Alex, “D” cannot be the correct answer because OSPF create DR and the BDR which reduces loops inthe network or overhead ( if all routers are allow to send and receive update then there will be loops everywhere in the network causing overheads.therefore only the DR send updates to the rest of the routers in OSPF routers

By: luki28

luki28 — Thu, 05 Feb 2015 13:37:41 +0000

yes 9tut is enough. I just cleard CCNA with 1000/1000 score. all in 9tut. one new question in OSPF

OSPFV3 QUESTION – What are 2 differences when comparing OSPFV3 and OSPFV2 ?
1. OSPFv3 is advertised on per-interface basis rather than networks.
2. OSPFv3 facilitates ipv6.

By: Ahmed

Ahmed — Sat, 31 Jan 2015 12:45:24 +0000

9tut enough to study ccna plz help?

By: Morgan

Morgan — Tue, 27 Jan 2015 09:45:58 +0000

Hi associates i will be taking the 200-120 exam this Friday kindly help me with the most recent dumps PDF please .

By: jv7

jv7 — Thu, 22 Jan 2015 18:22:52 +0000

DATE: JAN 22 2015 ++ 1000/1000 COMPOSITE TEST ++
**** OSPFV3 QUESTION – What are 2 differences when comparing OSPFV3 and OSPFV2 ?

1. OSPFv3 is advertised on per-interface basis rather than networks.
2. OSPFv3 facilitates ipv6.

**ALL OTHER QUESTIONS FROM 9TUT** THANKs

By: abdel

abdel — Mon, 19 Jan 2015 13:32:20 +0000

Q1 & 10 in my exam today, passed

By: @istanblack

@istanblack — Fri, 16 Jan 2015 07:19:09 +0000

Hi, about OSPF you can find some good shapes in this blog. Enjoy ;) http://ipcisco.com/konular/routing/ospf/

By: Hamesh

Hamesh — Tue, 13 Jan 2015 15:33:28 +0000

my name is hamesh and i want to give CCNA exem i need letest dumps so please help me my email ID is hamishgul@yahoo.com

By: SmartDumb

SmartDumb — Mon, 12 Jan 2015 16:43:17 +0000

@priyanka : first : you should select ‘physical’. 2ndy : you should turn off your router and then add what module you want to add. After finishing , turn your router ‘on’ again ;)

By: Nissim

Nissim — Sun, 11 Jan 2015 13:06:53 +0000

Q5 Q6 on the exam on 7-1-15

By: priyanka

priyanka — Sun, 04 Jan 2015 04:17:09 +0000

I m using packet tracer in tat i m getting only two slots on router how to add more slots

By: Imran Marwat

Imran Marwat — Sat, 03 Jan 2015 10:38:37 +0000

in Q #7 why option F z correct as OSPF does not have routing overheads coz LSA’s….
can someone explain it????

By: darkcom

darkcom — Sat, 20 Dec 2014 17:01:26 +0000

i had a new question in my exam about de process of ospf neighborship…i dont remember it very well, but the Q and answer is like this:

Q: how is the proccess of OSPF adjacencies? (or something like that)

Answer: Exstart – Exchange – Loading – Full state…

i passed with 1000 :D

By: Pradnesh

Pradnesh — Wed, 17 Dec 2014 16:18:21 +0000

there are eigrp simulation same as it is only eigrp was 22 i’ve to make it 2 and access list of host 3 access web finance only ip was change and theory was as it is of watson and 9tut.

By: Nazlo

Nazlo — Tue, 16 Dec 2014 23:19:54 +0000

Q3 today my exam!

By: Rizwan

Rizwan — Tue, 16 Dec 2014 19:08:42 +0000

@Pradnesh…Would you like to share .what simulation you got..? i have exam today

By: PRADNESH

PRADNESH — Tue, 16 Dec 2014 09:25:33 +0000

hi i passed ccna exam today 16/12/2014 i got 917/1000 refer only watson and 9tut for passing THANKS 9TUT!

By: priyanka

priyanka — Tue, 09 Dec 2014 10:21:08 +0000

Thanks Raghu

By: Raghu

Raghu — Mon, 08 Dec 2014 17:48:04 +0000

Hi,

Routers in different Area can be neighbours…..these are called Type-3 LSA…which is in depth in CCNP .

By: priyanka

priyanka — Sun, 07 Dec 2014 01:13:40 +0000

If routers in different areas cant be neighbors dan how dey will exchange routing information

By: riyas

riyas — Fri, 05 Dec 2014 11:49:59 +0000

i need dump ple send me fmriyas@gmail.com

By: SPS

SPS — Wed, 03 Dec 2014 14:24:19 +0000

could you please share those 2 new questions….

By: Ajay

Ajay — Wed, 03 Dec 2014 13:57:28 +0000

use specific route at the end of question not permit ip any any
i gave it today 986
two new question
if you have any doubt on ccna exam
contact me on Skype : ajaygilly1

By: rajibfci

rajibfci — Tue, 02 Dec 2014 20:14:03 +0000

OSPF is classless routing protocol that interfaces directly to IP as protocol 89. OSPF uses the concept of multicast hellos and dead timers to discover and maintain neighbors. Routing updates for OSPF are called link-state advertisements (LSAs). The topology table for OSPF commonly is referred to as the link-state database. OSPF floods areas with LSAs until every router in the domain has a consistent image of the network, called the link-state database. When every router has the same image of the network, the SPF algorithm, or the Dijkstra algorithm, is run on the database, and a loop-free graph describing the shortest-cost path to each destination in the network is created. This is called the SPF tree. The OSPF routes in the route table or forwarding table are derived from the SPF tree. Because each router has an identical copy of the entire SPF tree, rapid convergence is possible. OSPF uses an arbitrary metric of cost when determining the shortest path to a destination.

Let’s take a look at the major steps that OSPF goes through in building a route table, followed by a detailed examination of those steps. It is important to understand how OSPF operates over the different types of links and what type of LSAs propagates from one area to another. These details can be important when configuring OSPF over different media types:

MORE DETAILS>>

http://www.learncisco.net

By: likler

likler — Fri, 14 Nov 2014 12:01:42 +0000

958 today
another loopbacks in q9 1.1.1.1 and 2.2.2.2 two acl labs and eigrp 2

By: moha

moha — Thu, 13 Nov 2014 06:52:15 +0000

i passed ccna exam recently,the lab was Acl1,Acl2 and Eigrp
there was this new question:

Question 4

Network admin creates a layer 3 Etherchannel, bounding 4 interfaces into channel group 1. On what interface is the IP address configured?

A. the port-channel 1 interface

B. the highest number member interface

C. all member interfaces

D. the lowest number member interface

Answer: A

good luck

By: aria

aria — Mon, 10 Nov 2014 20:39:46 +0000

q8, q9 today

By: Muhe

Muhe — Mon, 03 Nov 2014 18:08:38 +0000

Which characteristics are representative of a link-state routing protocol? (Choose three)

A. provides common view of entire topology
B. exchanges routing tables with neighbors
C. calculates shortest path
D. utilizes event-triggered updates
E. utilizes frequent periodic updates

I would go with ADE…

I know OSPF uses SPF, but OSPF also sends the entire routing table every 30 min… Which it’s a frequent periodic update. If you watch the CCENT CBT Nuggets of Jeremy he tells you that…

By: muhammad sabeeh haider

muhammad sabeeh haider — Mon, 03 Nov 2014 05:28:03 +0000

hye friends i have latest dumps exam no 200-120 i download by actual test.com if any one interested its cost 1000 rupee only.my gmail i.d sabeehhaider14@gmail.com

By: saed

saed — Thu, 23 Oct 2014 15:36:00 +0000

q2 ws in today exam

By: peter

peter — Sat, 18 Oct 2014 15:49:53 +0000

Please send OSPF Dump to pbinaxas@gmail.com. Thanks

By: zoom4bd

zoom4bd — Thu, 02 Oct 2014 20:04:48 +0000

Clear CCNA with 1000 score
Question 5, 6 , 7
There was a new OSPF question was asking which comment will add all interface to ospf .network 0.0.0.0 255.255.255.255 area 0

By: jevdawg

jevdawg — Thu, 25 Sep 2014 01:37:21 +0000

alex because ospf decreases router overhead through areas. All info is confined to a single area thus decreasing not increasing overhead.

By: Anonymous

Anonymous — Mon, 22 Sep 2014 09:35:01 +0000

Great Work, all questions in the exam

By: Vikas

Vikas — Fri, 12 Sep 2014 13:13:07 +0000

alex that y d is not the answer of the question ;)

By: alex

alex — Fri, 29 Aug 2014 11:59:41 +0000

In Q2 someone can explain me why D can’t be one of the correct answer?

D. It increases routing overhead on the network.

OSPF don’t have routing overhead due to lsa traffic?

By: question

question — Sat, 02 Aug 2014 15:19:34 +0000

@ Amro……
OSPF= Open Shortest Path First

By: Amro

Amro — Thu, 31 Jul 2014 22:17:08 +0000

Q1
How come C. Calculates Shortest Path is correct?
Isn’t OSPF depending on the state of the link regardless of the path if long or short?

By: Strange

Strange — Wed, 16 Jul 2014 15:26:46 +0000

Question 3 and 5 were in the exam recently

By: Rizwan

Rizwan — Wed, 09 Jul 2014 11:30:40 +0000

Q3 was in today exam

By: Confused !

Confused ! — Tue, 08 Jul 2014 11:46:18 +0000

Q3,8 were in the today exam

By: Confused !

Confused ! — Sat, 05 Jul 2014 19:48:40 +0000

@Kevin
B,D are the correct answer

By: Anonymous

Anonymous — Sat, 05 Jul 2014 19:48:23 +0000

@Kevin

B,D are the correct answer

By: Kevin

Kevin — Fri, 04 Jul 2014 19:15:42 +0000

What is the real answer to this?

What are two enhancements that OSPFv3 supports over OSPFv2? (Choose two.)

A. It requires the use of ARP.
B. It can support multiple IPv6 subnets on a single link.
C. It supports up to 2 instances of OSPFv3 over a common link.
D. It routes over links rather than over networks.

I see examtut says that it’s B, D but the premium vce file in examcollections says it is B, D.

By: Lucas

Lucas — Thu, 03 Jul 2014 15:29:27 +0000

Caiu uma nova questão na minha prova, ela perguntava como divulgar todas as subinterfaces na área 0. Acho que a resposta era: network 0.0.0.0 255.255.255.255 area 0 .

No mais, todas as questões do 9tut, inclusive os laboratórios.

By: Kevin

Kevin — Wed, 02 Jul 2014 04:21:16 +0000

There is a new question in the premium file which goes like this:

Q: What are the two benefits of using a single ospf area in network design?

I forgot the choices but does anyone have the correct answer to this? Please help. Thanks.

By: bluebullet

bluebullet — Sat, 21 Jun 2014 05:09:34 +0000

CANADA
passed my CCNA exam today, thank God
thanks to this site, one of the best CCNA learning sites,
sims were EIGRP, ACL 1, ACL 2
9tut and watson

-i saw a new question regarding advantages of OSPF areas,
some options were about LSA propagation time, CPU utilization of routers in a single area, etc

sorry i can’t recall the details

By: Vicky

Vicky — Wed, 11 Jun 2014 04:14:27 +0000

Please someone mail me the latest CCNA 200-120 dumps at vikaskushwah89@gmail.ccom.

By: jj123

jj123 — Sat, 07 Jun 2014 23:13:02 +0000

@rmi the max number of ospf equal cost paths that are put in the ospf (and also eigrp) routing tables depends on the IOS version and router platform. Default is 4 and can be configured with the maximum-paths number OSPF or EIGRP subcommand

@erick so true! a prof told us he was interviewing a candidate who got an almost perfect score on the CCNA, but failed the interview really badly because he couldn’t answer basic questions

By: erick

erick — Sat, 07 Jun 2014 22:54:46 +0000

hey guys, don’t just memorized the answers, you need to understand every detail of the answers for you to used in a real world, not just passing the exam =) . good luck to our exam!

By: cy-slim

cy-slim — Fri, 30 May 2014 11:59:24 +0000

booooooom!!!!!!!! now ccna certified 972.. many thanks to 9tut and everyone that shared their experience… wish others best of luck… CCNP,,, You’re next!!!!

By: rmi

rmi — Thu, 29 May 2014 12:53:25 +0000

@sabh samal
what is the maximum number of ospf equal paths can be in ospf routing table ??

By: subh samal

subh samal — Thu, 29 May 2014 09:50:56 +0000

I mean more than 90 percent qestion i have answered correctly on a first attemp and remaining question and explanation i have understood properly

By: subh samal

subh samal — Thu, 29 May 2014 09:48:57 +0000

I am able to answer most of the questions discussed in 9tut. Will it be a right decision to take the exam on this weekend..??

By: Nifras

Nifras — Sun, 25 May 2014 11:41:27 +0000

Hi there,
If anybody need CCNA dumps, drop me a mail to nifras55electrical@gmail.com
Note: You should download and install Visual Cert (VCE) software in order to view the dumps
All the best for your exam

Best Regards

By: ipvcloud

ipvcloud — Thu, 22 May 2014 19:29:21 +0000

Hello people!!, Congratulations!! for who already pass the test and good luck for the upcoming people. Can anyone who has got the icnd 1 send it to me?? i will really appreciate it!! . ipvcloud@gmail.com. I will take the test on may 30. I am getting nervous but i’m working on it :),
Regards to everyone!!

By: rxd034000

rxd034000 — Thu, 22 May 2014 09:14:00 +0000

Q1,2,7 and 10 were at test today