CCNA – Basic Questions 2
Here you will find answers to Basic Questions – Part 2
Question 1
What are some of the advantages of using a router to segment the network? (Choose two)
A. Filtering can occur based on Layer 3 information.
B. Broadcasts are eliminated.
C. Routers generally cost less than switches.
D. Broadcasts are not forwarded across the router.
E. Adding a router to the network decreases latency.
Answer: A D
Question 2
Which of the following statements describe the network shown in the graphic? (Choose two)
A. There are two broadcast domains in the network.
B. There are four broadcast domains in the network.
C. There are six broadcast domains in the network.
D. There are four collision domains in the network.
E. There are five collision domains in the network.
F. There are seven collision domains in the network.
Answer: A F
Explanation
Only router can break up broadcast domains so in the exhibit there are 2 broadcast domains: from e0 interface to the left is a broadcast domain and from e1 interface to the right is another broadcast domain -> A is correct.
Both router and switch can break up collision domains so there is only 1 collision domain on the left of the router (because hub doesn’t break up collision domain) and there are 6 collision domains on the right of the router (1 collision domain from e1 interface to the switch + 5 collision domains for 5 PCs in Production) -> F is correct.
Question 3
Refer to the exhibit. The two connected ports on the switch are not turning orange or green. What would be the most effective steps to troubleshoot this physical layer problem? (Choose three)
A. Ensure that the Ethernet encapsulations match on the interconnected router and switch ports.
B. Ensure that cables A and B are straight-through cables.
C. Ensure cable A is plugged into a trunk port.
D. Ensure the switch has power.
E. Reboot all of the devices.
F. Reseat all cables.
Answer: B D F
Explanation
The ports on the switch are not up indicating it is a layer 1 (physical) problem so we should check cable type, power and how they are plugged in.
Question 4
For what two purposes does the Ethernet protocol use physical addresses? (Choose two)
A. to uniquely identify devices at Layer 2
B. to allow communication with devices on a different network
C. to differentiate a Layer 2 frame from a Layer 3 packet
D. to establish a priority system to determine which device gets to transmit first
E. to allow communication between different devices on the same network
F. to allow detection of a remote device when its physical address is unknown
Answer: A E
Explanation
Physical addresses or MAC addresses are used to identify devices at layer 2 -> A is correct.
MAC addresses are only used to communicate on the same network. To communicate on different network we have to use Layer 3 addresses (IP addresses) -> B is not correct; E is correct.
Layer 2 frame and Layer 3 packet can be recognized via headers. Layer 3 packet also contains physical address -> C is not correct.
On Ethernet, each frame has the same priority to transmit by default -> D is not correct.
All devices need a physical address to identify itself. If not, they can not communicate -> F is not correct.
Question 5
Refer to the exhibit. Two buildings on the San Jose campus of a small company must be connected to use Ethernet with a bandwidth of at least 100 Mbps. The company is concerned about possible problems from voltage potential difference between the two buildings. Which media type should be used for the connection?
A. UTP cable
B. STP cable
C. Coaxial cable
D. Fiber optic cable
Answer: D
Explanation
Because the company has problem about voltage potential difference between the two buildings so they should connect via fiber optic cable which uses light pulses to transmit information instead of using electronic pulses.
Question 6
Which command can be used from a PC to verify the connectivity between host that connect through path?
A. tracert address
B. ping address
C. arp address
D. traceroute address
Answer: A
Explanation
To check the connectivity between a host and a destination (through some networks) we can use both “tracert” and “ping” commands. But the difference between these 2 commands is the “tracert” command can display a list of near-side router interfaces in the path between the source and the destination. Therefore the best answer in this case is A – tracert address.
Note: “traceroute” command has the same function of the “tracert” command but it is used on Cisco routers only, not on a PC.
Question 7
Refer to the exhibit. A network engineer is troubleshooting an internet connectivity problem on the computer. What causing the problem?
A. wrong DNS server
B. wrong default gateway
C. incorrect IP address
D. incorrect subnet mask
Answer: C
Explanation
The IP address of the PC (192.168.11.2/24) is not on the same network with its gateway 192.168.1.1 -> C is correct.
Question 8
How many broadcast domains are shown in the graphic assuming only the default vlan is configured on the switches?
A. one
B. six
C. twelve
D. two
Answer: A
Explanation
Only router can break up broadcast domains but in this exhibit no router is used so there is only 1 broadcast domain.
For your information, there are 7 collision domains in this exhibit (6 collision domains between hubs & switches + 1 collision between the two switches).
Question 9
Refer to the exhibit.
|
PC> tracert 10.16.176.23 1 31 ms 31 ms 32ms 172.16.182.1 Trace complete. |
Host A has tested connectivity to a remote network. What is the default gateway for host A?
A. 172.16.182.1
B. 192.168.1.1
C. 10.16.176.1
D. 192.168.1.6
Answer: A
Explanation
It will list all the routers (from nearest to farthest) it passes through until it reaches its destination so the first hop is its nearest IP. If we ping from a PC, it is also the default gateway for that PC -> A is correct.
Question 10
What functions do routers perform in a network? (Choose two)
A. packet switching
B. access layer security
C. path selection
D. VLAN membership assignment
E. bridging between LAN segments
F. microsegmentation of broadcast domains
Answer: A C
please send the last ccna dump to ma.morsy@yahoo.com
Please all, guide me about the CCNA exam. from where should i start my studies? I new to networking. I have some videos, CBT Nuggets. And i know about this site, http://www.9tut.com. What should be my first step and then second?.
Thanks all.
Maybe this is just a technicality, but I kinda feel like question 6 is a bit silly. The question says that we’re working on a PC. It doesn’t say what the operating system is. Traceroute is the correct command on most Unix systems. Maybe I’m just being petty lol
@Grant: the question said on a PC. When you say Pc it refers to windows. When it is any other OS then they will specify.
@Fady: Just get the topics for the ccna and make sure you understand every bit well. The videos too are good. Try and get todd lamle’s 6th edition too. Undertand the concept and you will be fine.
Regarding Question 10: Routers segment a network into multiple broadcast domains, so why is F not also correct?
Please send a ccna material to use ccna exam preference…
Hi, this dumps site is very much useful for networking students. Never seen like these before… thanks to 9tut…:)
Just passed my exam
Mail me to get the latest dumps at lg-ruba7642@hotmail.com
Wats up Grant…man am a student of Makerere university and i have just finished ma ccna and ccnp and security…..and seriously speaking am not good at all these courses i did because of teachers being rude and so fast in ma class i ended up not getting all these very well.I have all the resources but i dont know where to start from…..with notes or videos…i mean am just confused and i need ur help man…..thank u
u can also email me ma answers and advice through my email…if u dont mind sir… fabresivan1@gmail.com
i recommend we support this site,in any way we can…keep up the good work 9tut.com
@fabres niwarinda
hello…i would like to suggest you to refer videos first and that go for notes
Hi guys,
i m gonna give the exam in this month .can anyone send me the latest dumb at meetkhanna182002@yahoo.com please it really urgent and important….
Hi guys,
i m gonna give the exam in this month .can anyone send me the latest dumb at meetkhanna182002@yahoo.com please it really urgent and important….
Latest dumbs to menderft@yahoo.com if you please sir.
Hi guys,
i m gonna give the exam in this month .can anyone send me the latest dumb at cristian_sgua@hotmail.com .
Hi!
I have registered for exam and willing to appear within this month.
Could anyone send me the lastest dumps for this week at adnan_abbasi@hotmail.com
If anyone can send dumps to leckie55@yahoo.com it would be appreciated
Hi,
I’m confusing regarding this course I have just finished it, I need ur advice from where I can start from to prepare for the exam. email osamaidriss@gmail.com
hi,
i have an exam on 3rd dec. could some one send me the last dump
omsa04@gmail.com
thank you
hi,
pls some one send me latest dumps on basbasit@yahoo.com
hi – Please could you send me the latest dumps gsb374@hotmail.com
Thanks in advance
i also have CCNA exams in january 2012 Can any one please send me the latest dump
e.mail: balabanoba@yahoo.com
Hello there world!
Next week I am going to take the CCNA exam. Can you please help me with latest dumps:
ty_the_1st@yahoo.com.
Ty in advance.
PS Any tips are welcome :)
Please send me latest CCNA dumps gangrel.tusk@gmail.com
Hi guys! Can someone please sent me dumps in PDF or Word format from sekhar and brah. I am failing to open them using VCE. My ccna exam is on the 11th of december. One more thing what is the difference between 640-802 with official practice exam and just 640-802? I’ve seen these 2 exams when i opened the Pearson VUE to schedule my exam and i am confused. I want to know which one to choose. brentrobertson7@gmail.com
Hi , please could you send me the latest dumps and vce. e-mail magluz30@hotmail.com
thank you
Hello,
Could someone please send me the latest CCNA dumps? brobillard01@gmail.com
thanks!
hi
plz someone send me latest dump to ahmadjizan@yahoo.com
thanks
How does that process work? When you see qnetsious that are infrequently answered correctly, what is the thinking? Do you guys look to see if the question is misleading or worded strangely, or is it discarded, do you ask people what they were thinking when they got it wrong?
plz someone send me latest dump to kadukp@seznam.cz … i am taking the CCNA exam on 19th december. thank you
please some one send me a dump before 16th December ishanka_idx@sltnet.lk
Very useful site!! thanks to 9tut. @ fady, make sure you grab the basics properyly no matter how much time you spend. I am currently retaking my ccna and for sure, the basics are critical. I find cbt nuggets videos very useful and easy to understand. they are available at http://www.kickasstorrents.com
TY 9tut.
Today I have passed the CCNA. (860/825)
50 questions 3 labs (VTP, EIGRP, ACL). 35 from 9tut.
Also thanks a lot Brar and Sekhar (still valid from examcollection)
Ty again 9tut
study you sad bastards and you wont need dumps
please send the last ccna dump to pratikpandey31@gmail.com
Can anyone send me the latest dump to my email id pratikpandey31@gmail.com .I would be really grateful to u . Plz send me some latest dump .
Thanks and Regards,
Can anyone send me the latest dump to my email id seauflow@gmail.com. I would be really grateful to u . Plz send me some latest dump .
Thanks and Regards,
please send the last ccna dump to sev7upsev@yahoo.co.uk
abheejeet89@gmail.com , please please…send me latest CCNA latest dump :)
please send latest dumps at sauravamrit@gmail.com
Hi guys,
i m gonna give the exam in this month .can anyone send me the latest dumb at
mohamedabdelkafi_vip@yahoo.com
hi guys
i want to ask how can i try or practice in home of all above classes or this website lecture.
have any softwere or some thing lik this for prctice
replty must
masroorshirazi@yahoo.com
please please please send the last ICND-1 dump to katkarpreeti23@gmail.com…
and plz suggest step by step ow to use 9tut.
plz replay
thx
pls send me ICDN-1 on onlyjigneshvaghela@gmail.com
Q 7 was on the exam
Please send me CCNA latest dumps @ rahulgupta9020@rediffmail.com
Thanks
I am going to give exam next month,will these dumps be valid for next month as we are getting into next year,please plz tell me
Taking exam on Friday the 28th, Failed the 1st time HAVE to pass the 2nd time. Please email dumps to onesicktexan4@gmail.com
~ it would be the best Christmas present EVER!
@9tut @xallax
There is a small difference on Q6 in the Prepking 680q dump
Which command can be used from a PC to verify the connectivity between host that connect through path?
While in the dump is:
Which command can be used from a PC to verify the connectivity between host that connect through a switch in the same LAN?
Same options
A. tracert address
B. ping address
C. arp address
D. traceroute address
But now answer is B ( Ping Address)
I guess this is the answer since hosts are conected to the same LAN, so the use of ping or tracert is the same, so the best option would be ping address.
Looking forward for recommendations for the best answer for this question.
Greetings