Home > New CCNA – Drag and Drop 4

New CCNA – Drag and Drop 4

September 26th, 2013 Go to comments

Here you will find answers to CCNA Drag and Drop Questions – Part 4

Question 1

Drag the function on the left to the matching security appliance or application on the right. (Not all functions are used)

SecurityAppliance.jpg

 

Answer:

1) antispyware: detects software designed to capture sensitive information and removes it from the computer
2) antivirus: prevents known malicious programs from being installed on workstations
3) IDS: identifies malicious network traffic and alerts network personnel
4) firewall: filters traffic based on source and destination IP address or traffic type

Question 2

Drag the Frame Relay acronym on the left to match its definition on the right. (Not all acronyms are used)

FrameRelayAcronym.jpg

 

Answer:

1) a router is this type of device: DTE
2) the most common type of virtual circuit: PVC
3) provides status messages between DTE and DCE devices: LMI
4) identifies the virtual connection between the DTE and the switch: DLCI

Question 3

The left describes some types of connections while the right describes some types of cables. Drag the items on the left to the proper locations.

cabletypes

Answer:

ccna_cabletypes_answer

Explanation:

To specify when we use crossover cable or straight-through cable, we should remember:
Group 1: Router, Host(PC), Server
Group 2: Hub, Switch
One device in group 1 + One device in group 2: use straight-through cable
Two devices in the same group: use crossover cable

For example: we use straight-through cable to connect switch to router, switch to host, hub to host, hub to server… and we use crossover cable to connect switch to switch, switch to hub, router to router, host to host… ).

+ We can connect a modem to router auxiliary port using a rollover cable. Recall that the purpose of the router’s auxiliary port is for connecting to a modem and most Cisco routers have a second port on the back called the auxiliary port. We can use this port in case of a far-away router goes down, the administrator can have someone in the area go to the router, plug in a modem and access to the router remotely (if using the console port, we have to go to the site to work with that router).

+ We can connect a PC serial port to a switch/router console port through the RJ-45 to DB-9 or RJ-45 to DB-25 adapter (at the PC end), depending on the computer.

Question 4

The above provides some descriptions, while the below provides some routing protocols. Drag the above items to the proper locations.

ccna_EIGRP_OSPF

 

Answer:

ccna_EIGRP_OSPF_answer

 

Explanation:

Enhanced Interior Gateway Routing Protocol (EIGRP) is a Cisco proprietary routing protocol, so it is vendor-specific. By default, EIGRP internal routes have an administrative distance value of 90.

OSPF uses cost as its metric. By default, the cost of an interface is calculated based on bandwidth with the formula cost= 10000 0000/bandwith (in bps). OSPF elects a DR on each broadcast and nonbroadcast multiaccess networks (like Ethernet and Frame Relay environments, respectively). It doesn’t elect a DR on point-to-point link (like a serial WAN).

Question 5

As a CCNA candidate, you are required to have a firm understanding of the OSI model. At which layers of the OSI model do Wide Area Networks operate in? Please drag the items to the proper locations.

WANOSI.jpg

 

Answer:

WANOSI_answer.jpg

Explanation

WAN operates in the two lowest layers which are Data Link and Physical layers.

Comments (44) Comments
  1. ismael
    November 5th, 2013

    can somebody explain Q5

  2. sameer
    November 23rd, 2013

    the answer of Q5 is not correct>>data link & Network

  3. Ali
    November 24th, 2013

    It is a tricky question.
    WAN is just a bigger LAN.
    While LAN uses Ethernet, WAN uses other technologies like; Frame Relay and Leased Lines.
    WAN is a single network with long distance, so no layer 3 is needed.

  4. john
    November 28th, 2013

    @ismael : let’s say it like this. if your at home and your computer is connected to the internet, you are using an ethernet to your router/modem and serial cables on the internet side. so you are using physical layer. and for the data link, those links needed an encapsulation method for things like authentication. sorry for my grammar

  5. Navid
    December 14th, 2013

    is there anyone who can help me with new ccna dumps its highly appreciate it. please contact me: Skype: Navid.1

  6. Adeel
    January 29th, 2014

    Hello Guys good news for you that CCNA discounted and Microsoft vouchers are now available. Now New CCNA (200-120) vouchers on special discount of 58% for World wide, with six months expiry date till you purchase. Each voucher cost 70USD.

    Details Required For CCNA Voucher For Discount Processing:

    1-Full Name. 1st Name & Last Name (as you want to appear on certificate & documents)
    2-Country.
    3-City.
    4-State.
    5-Pin Code (or Area Code)
    6-Residential Address (or where you can collect your Certificate or further correspondence
    can be received)
    7-Date of birth
    Add me on Skype through this information which is written below:
    Skype Name: rockon660
    you can also email me at this email address which is written below:
    madeelqaiser@gmail.com
    If you have any Questions feel free to contact me.

    Thanks,
    Best regards,
    Adeel

  7. Elias
    January 29th, 2014

    I passed mine today the only thing you need to do know the answers by heart

  8. MOHSIN
    January 30th, 2014

    hi … i am writing my ccna exam on monday please could u sent me the latest dumps that u people got.. mohsinfida489@yahoo.com

  9. moataz
    March 10th, 2014

    Explain Q5
    1 is the physical layer, 2 the MAC layer, you don’t really need layer 3 as you could make one large network, layer 3 is needed when you break the LAN’s into different network so routing comes in at that point.

    Now to answer your question, in essence you are correct, there are damn few WANS that would be running on L2, those that do would more than likely be running a VLAN to isolate some of the traffic and L3 to route other traffic.

  10. Anonymous
    May 13th, 2014

    please can any one help me with the lattest dump videos and the simulator i have failed 3 times and would like to start form scratch

  11. James
    July 6th, 2014

    HI im taking my exam this month can send me the latest dump thankyou

  12. James
    July 6th, 2014
  13. Anonymous
    July 21st, 2014

    @Anonymous – good you don’t give up. But please be careful to learn concepts and not only memorize.

  14. ramos1987
    July 30th, 2014

    Hi dear member 9tut. I wonder if there is a French version of the CCNA 200-120 exam because I’d passed the exam in French. I live in Ivory Coast

  15. Esther
    August 21st, 2014

    Hi friends, pls i need someone to help me with ccna latest dump and simulators. my exam is on 30th of August, 2014. i pray God bless u for ur kindness.(estylo4life@yahoo.com )

  16. jp0427
    October 7th, 2014

    Question #2 on my exam last Sunday, 2014/10/5.

    Thanks a lot 9tut. Almost all questions were from here except for two.
    Had the EIGRP and ACL 1 sims.

  17. Loay
    October 19th, 2014

    Q2 is exam question yesterday

  18. vouchers
    October 22nd, 2014

    Dear All
    Regarding all CISCO exams CCNA CCNA Security CCNP (Route Switch Tshoot) updated valid dumps & Exam discount vouchers available globally.
    1. CCNA 200-120 60 % discounted vouchers
    2. CCNP (Route Switch TShoot) 25 % discounted Vouchers
    3. CCNA Security 640-554 60 % discounted Vouchers
    Ask any kind of technical and exam related questions from our CCIE experts.
    Feel Free to Contact
    Email Contact:dheprofessionals@gmail.com
    Skype Id:net.rideplay

    Thanks

    Best Regard
    Admins

  19. Dany
    October 30th, 2014

    question 2 was on my exam yesterday.

  20. onepiece
    October 31st, 2014

    hi, i am going to exam at the end of this month, could I ask favor to the generous people out there to give a updated dump for ccna 200-120 exam. :) my email address ronie.a.forio@hotmail.com thank you!

  21. AK
    October 31st, 2014

    For question 5 explanation.
    http://www.cisco.com/web/learning/netacad/demos/CCNA2v3Demo/ch1/1_1_4/index.html

    WAN operates at datalink and physical. (layer 1 and 2)

    regards,
    AK

  22. mhk
    November 12th, 2014

    hi friends, i am going to take CCNA exam is on 24th November, 2014, please i need someone to help me with CCNA latest dump…. please send me this e-mail— hasnain_khan1987@yahoo.com

  23. venkat
    November 18th, 2014

    please send me latest dumps
    sairam.paripati@gmai.com

  24. Rana Adnan
    November 23rd, 2014

    Please send me latest dumps at mayrmg@gmail.com

  25. james
    November 25th, 2014

    @Sameer

    you are wrong. Q5 answer is correct : WAN operates under Data link and physical layer.

    Pls read.
    http://www.cisco.com/web/learning/netacad/demos/CCNA2v3Demo/ch1/1_1_4/index.html

  26. Ajay
    December 1st, 2014

    anyone who want latest ccna dumps for free or any doubt on any question can contact me
    i am ready to help
    currently i m ccie security pursuing
    skype id:ajaygilly1
    facebook:ajaygrewal007@gmail.com or ajaygilly
    gmail:ajayajay16@gmail.com

  27. qammar razzaq
    December 7th, 2014

    @AK thanks

  28. tij
    January 3rd, 2015

    hi . Please send me the latest dumps . i will take my in this month. thanks

  29. kiani
    January 9th, 2015

    Hi Ajay plz send me latest dumps at kianiak@yahoo.com

  30. losenmess
    January 14th, 2015

    Hi, Please send me latest dumps at losenmess@gmail.com. Thx.

  31. Satyrus74
    January 15th, 2015

    send me the latest dumps please thank you satyrus1974@gmail.com

  32. Satyrus74
    January 15th, 2015

    Hi, Ajay send me the latest dumps please thank you

  33. zaidi
    January 27th, 2015

    Kindly send me latest dumps in pdf, I am having test on first week of feb email: ssrzaidi@outlook.com

  34. Fry
    February 6th, 2015

    Q2 on the exam today. Passed 903

  35. Rani
    February 19th, 2015

    Hi can any one send me vce player 1.2 please at raniagarwal31@yahoo.com

  36. ND
    March 2nd, 2015

    Hello all, please can anyone send me the latest dump at ndalways4real@gmail..com

  37. ND
    March 2nd, 2015

    Hello all, please can anyone send me the latest dump at ndalways4real@gmail.com

  38. MehD
    March 13th, 2015

    would anyone pls send me the latest dumps : s.mahdiamiri@outlook.com
    i’ll take the exam next month

  39. Epy
    March 20th, 2015

    Hi friends, please can anyone help me with ccna latest dump and exam simulators for the dumps. my exam is in April 2015.(emmaddek2@yahoo.com ).
    Stay blessed

  40. Himalay
    March 20th, 2015

    The IP upper layer protocol is same for WAN & LAN from Network Layer to Application layer.
    LAN & WAN technology differs in Physical and data link layer. That’s why correct answer is Physical and Data Link layer

  41. JM
    April 24th, 2015

    Please can anyone help me with updated dump for ccna 200-120 exam, please help I will take exam May 2015

  42. JM
    April 24th, 2015

    Please can anyone help me with updated dump for ccna 200-120 exam, please help, I will take the exam May 2015, here is my email address machaka.jealousy@yahoo.com

  43. mohd g
    May 12th, 2015

    pass today Q2 IN EXAM

  44. Neptune
    May 29th, 2015

    I’ve exam on 15 june, someone could send me last dump? Neptune7@libero.it

Add a Comment