Home > CCNA – Basic Questions

CCNA – Basic Questions

November 12th, 2011 Go to comments

Here you will find answers to CCNA – Basic Questions

Question 1

For which type of connection should a straight-through cable be used?

A. switch to switch

B. switch to hub

C. switch to router

D. hub to hub

E. router to PC

 

Answer: C

Explanation

To specify when we use crossover cable or straight-through cable, we should remember:

Group 1: Router, Host, Server

Group 2: Hub, Switch

One device in group 1 + One device in group 2: use straight-through cable

Two devices in the same group: use crossover cable

In this case we can use straight-through cable to connect a switch to a router -> C is correct.

Question 2

Which type of cable is used to connect the COM port of a host to the COM port of a router or switch?

A. crossover

B. straight-through

C. rolled

D. shielded twisted-pair

 

Answer: C

Explanation

The correct question should be “Which type of cable is used to connect the COM port of a host to the CONSOLE port of a router or switch?” and the correct answer is rollover cable. But we can’t plug this rollover cable directly into our host because it will not work. We often use a RJ45 to DB9 Female cable converter as shown below:

rollover_db9cable.jpg

Question 3

What is the first 24 bits in a MAC address called?

A. NIC

B. BIA

C. OUI

D. VAI

 

Answer: C

Explanation

Organizational Unique Identifier (OUI) is the first 24 bits of a MAC address for a network device, which indicates the specific vendor for that device as assigned by the Institute of Electrical and Electronics Engineers, Incorporated (IEEE). This identifier uniquely identifies a vendor, manufacturer, or an organization.

Question 4

In an Ethernet network, under what two scenarios can devices transmit? (Choose two)

A. when they receive a special token

B. when there is a carrier

C. when they detect no other devices are sending

D. when the medium is idle

E. when the server grants access

 

Answer: C D

Explanation

Ethernet network is a shared environment so all devices have the right to access to the medium. If more than one device transmits simultaneously, the signals collide and can not reach the destination.

If a device detects another device is sending, it will wait for a specified amount of time before attempting to transmit.

When there is no traffic detected, a device will transmit its message. While this transmission is occurring, the device continues to listen for traffic or collisions on the LAN. After the message is sent, the device returns to its default listening mode.

So we can see C and D are the correct answers. But in fact “answer C – when they detect no other devices are sending” and “when the medium is idle” are nearly the same.

Question 5

Which two benefits are provided by using a hierarchical addressing network addressing scheme? (Choose two)

A. reduces routing table entries

B. auto-negotiation of media rates

C. efficient utilization of MAC addresses

D. dedicated communications between devices

E. ease of management and troubleshooting

 

Answer: A E

 

Question 6

When a host transmits data across a network to another host, which process does the data go through?

A. standardization

B. conversion

C. encapsulation

D. synchronization

 

Answer: C

Explanation

To transmit to another host, a host must go through the TCP/IP model (very similar to the OSI model). At each layer, the message is encapsulated with that layer’s header (and trailer if it has). This process is called encapsulation.

Question 7

Which two Ethernet fiber-optic modes support distances of greater than 550 meters?

A. 1000BASE-CX

B. 100BASE-FX

C. 1000BASE-LX

D. 1000BASE-SX

E. 1000BASE-ZX

 

Answer: C E

Explanation

Below lists the cabling standards mentioned above

Standard Cabling Maximum length
1000BASE-CX Twinaxial cabling 25 meters
100BASE-FX Two strands, multimode 400 m
1000BASE-LX Long-wavelength laser, MM orSM fiber 10 km (SM)3 km (MM)
1000BASE-SX Short-wavelength laser, MM fiber 220 m with 62.5-micron fiber; 550 mwith 50-micron fiber
1000BASE-ZX Extended wavelength, SM fiber 100 km

Note:

+ MM: Multimode

+ SM: Single-mode

(Reference: The official self-study test preparation guide to the Cisco CCNA INTRO exam 640-821)

Question 8

Refer to the exhibit. What type of connection would be supported by the cable diagram shown?

Pin Color Function Pin Color Function
1 White/Green TX+ 1 White/Green TX+
2 Green TX- 2 Green TX-
3 White/Orange RX+ 3 White/Orange RX+
6 Orange RX- 6 Orange RX-

A. PC to router

B. PC to switch

C. server to router

D. router to router

 

Answer: B

Explanation

From the “Pin” and “Color” in the exhibit we know that this is a straight-through cable so it can be used to connect PC to switch.

Question 9

Refer to the exhibit. What type of connection would be supported by the cable diagram shown?

Pin Color Function Pin Color Function
1 White/Green TX+ 3 White/Green RX+
2 Green TX- 6 Green RX-
3 White/Orange RX+ 1 White/Orange TX+
6 Orange RX- 2 Orange TX-

A. PC to router

B. PC to switch

C. server to switch

D. switch to router

 

Answer: A

Explanation

This is a crossover cable so it can be used to connect PC and router.

rj45-crossover-cable.jpg

Question 10

Which two topologies are using the correct type of twisted-pair cables? (Choose two)

A. connection_pc_switch.jpg

B. connection_router_pc.jpg

C. connection_switch_router.jpg

D. connection_switch_pc.jpg

E. connection_switch_switch.jpg

 

Answer: D E

 

Comments (2463) Comments
Comment pages
1 28 29 30 31 32 50 953
  1. Dylan
    November 8th, 2012

    Hello everyone! I have my test sched in two weeks. Could i get a dump of latest to Sasoca54@yahoo.com

    Thanks !

  2. Andy
    November 8th, 2012

    Do not be solely dependent on Dumps, usage of this site wiul also be helpful…..read 3/4 timesuntil concept is cleared……and should help you through the cert..also practise the SIMs here…

  3. Jorge
    November 10th, 2012

    Hi Guys,

    I passed the Certification test.

    Many of the questions which I got are in here(9tut) then check them out twice.

    I got a similar EIGRP and ACL lab like the ones which are here.

    Also I had a STp switching troubleshooting lab.

    Do not be affraid about the exam, it is very easy!!!.

    Do not waste your time on topics which are not evaluated on the exam and just focus on the topics listed here: https://learningnetwork.cisco.com/docs/DOC-4976

    Good Luck!!!

  4. Tagui
    November 10th, 2012

    for question 6, i think that the answer is ‘A’, because the data must follow the standardization which include the OSI model and TCP/IP model, so the encapsulation comes under the standardization. Please i am not correct? If not guide me.

  5. Tagui
    November 10th, 2012

    Even for question 9, the standard says we use a crossover cable to connect similar devices(PC to PC, Switch to Switch and Router to Router) and not dissimilar, i am so confused about your answer, i think that the answer of this question is not listed,(to connect a PC to a router we use rollover or console cable). please correct me if my answer is wrong.

  6. tahsin
    November 11th, 2012

    hi can any 1 tell me how to start ? i mean is going through all sections for this group to give Certification test? i am really confused . please help

  7. Anonymous
    November 11th, 2012

    please friends i need a dump(valid in new zealand) of ccna 640-802 my exam is at the conner. send it to my e-mail

    miteshinder_32@yahoo.co.in

  8. YO…………..
    November 12th, 2012

    passed today with 973/1000…..CCNA.
    thanks to the great site 9tut……n d dumps which help me to passed out…..
    now going ahead for security………….

  9. CCNASHORTERMGOAL
    November 12th, 2012

    Hello everyone! I have my test sched in two weeks. Could i get a dump of latest to halowireless@gmail.com and please not the one that’s for sale.

    Thanks !

  10. ahmad
    November 12th, 2012

    yo………………….
    whats your dump?
    my exam tomorow
    i studied sim from 9 tut
    and my dump are sekher and brar and colisio

  11. ahmad
    November 12th, 2012

    your laps please?

  12. ahmad
    November 12th, 2012

    Jorge …….
    stp lab in ccna!!!!!!!
    my exam tomorow and i dont know anything for this sim??
    please help me man?

  13. fatou
    November 12th, 2012

    Hello friends, can someone send me the lattest dump to fadiop1@yahoo.fr
    thanks

  14. fatou
    November 12th, 2012

    and if possible a setup of vce to fadiop1@yahoo.fr thanks

  15. Moustafa
    November 13th, 2012

    I need the latest dump,please.

  16. Help please…
    November 14th, 2012

    So i took cisco 2 years ago and im going back through the Ciruiculum to certify for my job. Im using CBT nuggets but would love a dump of questions and labs and sims, Any help and / or suggestions would be amazing i test on the 28th. akhax907@gmail.com

  17. nidhish k
    November 14th, 2012

    i have passed ccna ,i got sim acl ,eigrp and Switch.

  18. Ruba
    November 15th, 2012

    Just passed my exam
    Mail me to get the latest dumps at lg-ruba7642@hotmail.com

  19. Anonymous
    November 15th, 2012

    plz mail me ccna latest dumps for preps
    thanks
    fahimbacha7@gmail.com

  20. FARAZ
    November 16th, 2012

    HELLO ALL,
    Can Any one give Latest Dumps . Please Mail me Latest dumps at 360.faraz@gmail.com
    i will be very thank full to u….. please i m scheduling My paper in Coming week.

  21. M.Alzoubi
    November 16th, 2012

    Hello friends, My Exam will be in two weeks . can someone send me the lattest dump to malzoubi2001@yahoo.com?

    thanks

  22. Vampire
    November 17th, 2012

    About to appear in 10 days..Any suggestion guys…

  23. Saudi felex
    November 18th, 2012

    hi : )

    i wanna ask about ccna exam

    how many questions inside ?

  24. Romareo
    November 18th, 2012

    my exam after 2 weeks

    i need some help 4 ccna latest dumps

    a6lag1@gmail.com

  25. soniac
    November 18th, 2012

    hi, i’ll be having my exam this Dec 15, please send me the latest CCNA dump. please send to ja_wu_da@hotmail.com

    thanks everyone!

  26. Obaid
    November 18th, 2012

    hi, i’ll be having my exam this Dec 15, please send me the latest CCNA dump, please send to obaidshakeel@gmail.com

  27. Marcel
    November 19th, 2012

    I am taking CCNA exam in two days.. Please send me the lastest CCNA dump, britohernandezmarcel@gmail.com

  28. Anonymous
    November 20th, 2012

    hi evryone realy need help <i need the lastest dump fr ccna ,my exam is in 1week plz
    yav.ngoy@yahoo.fr

  29. Vivek
    November 20th, 2012

    Need latest dumps (free), please email me @ itsonumahajani@gmail.com

  30. Question 4
    November 20th, 2012

    كم عدد الأسئلة يا اخون ؟؟ حد يفيدنا

  31. engMahmoud
    November 21st, 2012

    Need latest dumps (free), please email me at mahmoud.kasim89@gmail.com..Thank you in advance :)

  32. TheLordsSon
    November 21st, 2012

    Any dumps please richk1000@hotmail.com

  33. Anonymous
    November 21st, 2012

    hi, i will be having my exam this Dec , pls send me the latest CCNA dump. please send t0 waqasmemon_2k6@hotmail.com

    Thanks

  34. caige
    November 21st, 2012

    hi all

    i will be writing my exam next week can you please send me the latest dumps. my email address is caige@highveldmail.co.za

  35. rusure
    November 21st, 2012

    In response to everyone looking for “dumps” ..
    You do not need them.
    Study the material and practice the sims with packet tracer.
    over and over again .. then practice some more.
    Click on the web browsers on the hosts to make sure ACL’s WORK.
    I passed today with a score over 900.
    It took focus, dedication and hard work.
    NO DUMPS!

  36. Jay
    November 22nd, 2012

    I just passed my CCNA today wiith over 900 and I wanted to thank you guys. This site, along with the dumps and very important, the LABSIMs helped me a lot. However be sure to understand the concepts.

  37. Roy
    November 22nd, 2012

    HI!!!!!!!!! My CCNA Global Exam will be held on next month. I am very nervous.. Please send me the latest dumps Regarding 640-802 exam.My id is bumba.in4tech@gmail.com….

  38. Masudul
    November 23rd, 2012

    Pls send me last dump. My email: litusita@yahoo.com

  39. Anonymous
    November 23rd, 2012

    11 days to go fr my exam….can i get the latest dump for 640-802 ?

  40. Weeha
    November 24th, 2012

    Great site!

    Need latest dump please…

    Email: WeehaZapper@Gmail.Com

    Thanks and Good Luck To All!

  41. haR
    November 24th, 2012

    Pls send me last dump. My email hani_2012_rad@yahoo.com

  42. admin11
    November 25th, 2012

    my exam after 2 weeks

    i need some help 4 ccna latest dumps

    a6lag1@gmail.com

  43. Med
    November 25th, 2012

    Just passed my exam
    Mail me to get the latest dumps at lg-ruba7642@hotmail.com

  44. Salim
    November 25th, 2012

    please send me last dump @salimhosain@gmail.com. Please please please

  45. Sheikh Umer
    November 26th, 2012

    Need a latest Dumps for CCNA…very urgent..
    please help

  46. Sheikh Umer
    November 26th, 2012

    Need a latest Dumps for CCNA…very urgent..
    please help….usheikh.c@stc.com.sa

  47. Kamrul
    November 26th, 2012

    please anyone help & give me Valid Dump (Exam:640-802) for Bangladesh

    email: khshuhel2003@yahoo.com

  48. ahmed tag
    November 26th, 2012

    please send me last dump <<lordoo21@yahoo.com

  49. Cristian
    November 26th, 2012

    Hello everyone! Could i get a dump of latest to cristian_sgua@hotmail.com

  50. Anonymous
    November 26th, 2012

    Dear 9tut,
    could you please send me the latest dump for CCNA 640-802?
    Email is: tonyraneem@yahoo.com
    Thanks. I really appreciate it.

Comment pages
1 28 29 30 31 32 50 953
Add a Comment