CCNA – Basic Questions
Here you will find answers to CCNA – Basic Questions
Question 1
For which type of connection should a straight-through cable be used?
A. switch to switch
B. switch to hub
C. switch to router
D. hub to hub
E. router to PC
Answer: C
Explanation
To specify when we use crossover cable or straight-through cable, we should remember:
Group 1: Router, Host, Server
Group 2: Hub, Switch
One device in group 1 + One device in group 2: use straight-through cable
Two devices in the same group: use crossover cable
In this case we can use straight-through cable to connect a switch to a router -> C is correct.
Question 2
Which type of cable is used to connect the COM port of a host to the COM port of a router or switch?
A. crossover
B. straight-through
C. rolled
D. shielded twisted-pair
Answer: C
Explanation
The correct question should be “Which type of cable is used to connect the COM port of a host to the CONSOLE port of a router or switch?” and the correct answer is rollover cable. But we can’t plug this rollover cable directly into our host because it will not work. We often use a RJ45 to DB9 Female cable converter as shown below:
Question 3
What is the first 24 bits in a MAC address called?
A. NIC
B. BIA
C. OUI
D. VAI
Answer: C
Explanation
Organizational Unique Identifier (OUI) is the first 24 bits of a MAC address for a network device, which indicates the specific vendor for that device as assigned by the Institute of Electrical and Electronics Engineers, Incorporated (IEEE). This identifier uniquely identifies a vendor, manufacturer, or an organization.
Question 4
In an Ethernet network, under what two scenarios can devices transmit? (Choose two)
A. when they receive a special token
B. when there is a carrier
C. when they detect no other devices are sending
D. when the medium is idle
E. when the server grants access
Answer: C D
Explanation
Ethernet network is a shared environment so all devices have the right to access to the medium. If more than one device transmits simultaneously, the signals collide and can not reach the destination.
If a device detects another device is sending, it will wait for a specified amount of time before attempting to transmit.
When there is no traffic detected, a device will transmit its message. While this transmission is occurring, the device continues to listen for traffic or collisions on the LAN. After the message is sent, the device returns to its default listening mode.
So we can see C and D are the correct answers. But in fact “answer C – when they detect no other devices are sending” and “when the medium is idle” are nearly the same.
Question 5
Which two benefits are provided by using a hierarchical addressing network addressing scheme? (Choose two)
A. reduces routing table entries
B. auto-negotiation of media rates
C. efficient utilization of MAC addresses
D. dedicated communications between devices
E. ease of management and troubleshooting
Answer: A E
Question 6
When a host transmits data across a network to another host, which process does the data go through?
A. standardization
B. conversion
C. encapsulation
D. synchronization
Answer: C
Explanation
To transmit to another host, a host must go through the TCP/IP model (very similar to the OSI model). At each layer, the message is encapsulated with that layer’s header (and trailer if it has). This process is called encapsulation.
Question 7
Which two Ethernet fiber-optic modes support distances of greater than 550 meters?
A. 1000BASE-CX
B. 100BASE-FX
C. 1000BASE-LX
D. 1000BASE-SX
E. 1000BASE-ZX
Answer: C E
Explanation
Below lists the cabling standards mentioned above
| Standard | Cabling | Maximum length |
| 1000BASE-CX | Twinaxial cabling | 25 meters |
| 100BASE-FX | Two strands, multimode | 400 m |
| 1000BASE-LX | Long-wavelength laser, MM orSM fiber | 10 km (SM)3 km (MM) |
| 1000BASE-SX | Short-wavelength laser, MM fiber | 220 m with 62.5-micron fiber; 550 mwith 50-micron fiber |
| 1000BASE-ZX | Extended wavelength, SM fiber | 100 km |
Note:
+ MM: Multimode
+ SM: Single-mode
(Reference: The official self-study test preparation guide to the Cisco CCNA INTRO exam 640-821)
Question 8
Refer to the exhibit. What type of connection would be supported by the cable diagram shown?
| Pin | Color | Function | Pin | Color | Function |
| 1 | White/Green | TX+ | 1 | White/Green | TX+ |
| 2 | Green | TX- | 2 | Green | TX- |
| 3 | White/Orange | RX+ | 3 | White/Orange | RX+ |
| 6 | Orange | RX- | 6 | Orange | RX- |
A. PC to router
B. PC to switch
C. server to router
D. router to router
Answer: B
Explanation
From the “Pin” and “Color” in the exhibit we know that this is a straight-through cable so it can be used to connect PC to switch.
Question 9
Refer to the exhibit. What type of connection would be supported by the cable diagram shown?
| Pin | Color | Function | Pin | Color | Function |
| 1 | White/Green | TX+ | 3 | White/Green | RX+ |
| 2 | Green | TX- | 6 | Green | RX- |
| 3 | White/Orange | RX+ | 1 | White/Orange | TX+ |
| 6 | Orange | RX- | 2 | Orange | TX- |
A. PC to router
B. PC to switch
C. server to switch
D. switch to router
Answer: A
Explanation
This is a crossover cable so it can be used to connect PC and router.
Question 10
Which two topologies are using the correct type of twisted-pair cables? (Choose two)
A. 
B. 
C. 
D. 
E. 
Answer: D E
very good questions
I need the latest dumps guys
wanna_passATyahooDOTcom
plz forward latest dumps guys!! wanna_pass@yahoo.com
I cleared my exam and i got the pass4sure dump from this link mentioned in bracket study material also avaiable in this link (( demo.urlshortenerscript.net/2f5 )) all the best for your exam.
Hi all,can someone share dupms and pass4sure, i will try to take the exam this week. thank you ( jed1788@yahoo.com ) thanks..
Ccna book Todd Lammle give the quistion in globle exam
my Email…. Peyarskumar@yahoo.com
will take exam soon. can anyone kindly pass me the pass4sure dupms PLEASE?!!! email: yanfang.zhao1986@gmail.com…Thanks in advance!
Looking I am also looking for the PASS4SURE latest dumps, please send me on this id mshafiq@kth.se . Best Regards
someone plz send the pass4sure dumps 612hnaresh@gmail.com.
Hi guys! Help me please. Can you send me the latest dump. I’m taking my exam in two weeks. My email: enyurelysn@gmail.com
Thanks.
Can you guys send me the latest dumps for the CCNA. Thank you. immortal96@hotmail.com
dear sir plz inform ,me that whitch type of question come in exam for ccna year 2013
pls help me email add-: irshadalimmm@gmail.com thanks
Hi CCNA Certified / Aspirants,
Can you please share the latest dumps for this current year 2013? I will be taking the CCNA exam this coming Sept as one of the last batch. Please send it to my email at ppeteza@gmail.com
I will appreciate all the help y’all can provide. thank you in advance.
Regards,
Pat
ppeteza@gmail.com
Hello, Can someone send me the latest dumps?I am taking CCNA exam by end of September month. My email id is bago2n@gmail.com…I will appreciate your help!!
E’ possibile avere l’ultimo Pass4sure. Grazie
fabianorokko@gmail.com
can any one send me Pass4sure my exam /CCNA is 14-09-2013
my email is muradabuseta@gmail.com
please help
hi ….
I’m going to try … Hi Which Lab sim exam CCNA to study ?
Passed CCNA today thanks 9tut!!!!
hi guys. wud really appreciate it if i can get the latest ccna dumps and pass4sure soonest, for my exam is middle of this month. jes wanna practice. thanks a bunch
hi guys. wud really appreciate it if i can get the latest ccna dumps and pass4sure soonest, for my exam is middle of this month. jes wanna practice thanks a bunch. pls send to nadedewe@yahoo.com.thanks again.
Can anyone confirm that simulations are the lab SIM only??
Hi CCNA Certified / Aspirants,
Congratulations to all who have passed their exams today!
Can you please share the latest dumps / Pass4Sure for this current year 2013? I will be taking the CCNA exam this coming Sept as one of the last batch. Please send it to my email at ppeteza@gmail.com
I will appreciate all the help y’all can provide. thank you in advance.
Regards,
Pat
ppeteza@gmail.com
Hi everyone,
I passed my exam yesterday 960/1000. Dumps were VTP, EIGRP and ACL with minor modifications. Thanks 9tut for your website, it was very helpful.
Regards
Dear all CCNA Certified Guys
Can you Guys send the latest CCNA dumps with Todd Lemmle 7edition book
Thanks
whamidi1@gmail.com
need the latest dump… please .. very very very please :)
please email it to reneitachisan@yahoo.com
Hello, Can someone send me the latest dumps?I am taking CCNA exam by end of September month. My email id is roa0102196@gmail.com…I will appreciate your help!!
@ikafjmda plz send me the latest dump and what do u have as lab?
boujlalhouda@gmail.com
So me Pls send me the dump
mamoundi@mail.com
I have the exam on 10th, can anyone send me the latest dumps please, shujaansari@outlook.com
can anyone send to me the last dumps please , a.abdelhadi1989@gmail.com
for Spike dumps please click on
http://filesrightnow.com/file/0Rh5J
For Cisco packet tracer 5.2 click on
http://downloadconfirm.net/file/0R6RU
Fpr Cisco Packet Tracer 5.3 click on
http://downloadconfirm.net/file/0R63o7
3-Visual Cert Exam Suite 3.01 registered click on
http://filesquick.net/file/0Ret7
http://filesquick.net/file/0Ret8
can anyone send to me the last dumps please mfahad717@hotmail.com
thanks
@ Adrian ACL or ACL2?
Hello, Can someone send me the latest dumps?I am taking CCNA exam by end of September month. My email id is n2udeeply_2000@yahoo.com.
I ll have my exam in 25 640-802…….great this page…
@ EVERYONE – S-T-O-P asking for dumps and cluttering up a nice blog that is supposed to educate us with a repeated request for dumps. Go to the dump site and PAY for it. NO ONE here really has any dumps that is different from those SOLD at the dump site for $15.00 It will just be the SAME PDF file they bought. Just get it from the site SHEEEEEESHHHHH!!!! Now let’s get back to asking and answering these multiple choice questions on 9tut.
Cheers
**It’s a Rubicon**
My friend ciscoER, as what you are saying makes sense, quit frustrating people with youunwelcomed remarks. You may have $15 to pay for the dump, not everybody does.
This site is free, you should go blog where it’s paid or else your own site and moderate it as you want.
With your comment you are sitting people up and they may have real issues. Just ignore their request and let them be
@CiscoER
ACL2
Thanks 9tut. I made it. I passed my CCNA 200-120 today. The sim is Access-list 1 , Access-list 2 & EIGRP. A lot of new questions like Netflow, Syslog, SNMP, VRRP, and GLBP.
Q7
can someone send me the latest dump im taking the exam in two weeks osman_242@hotmail.com
pay for the dump, not everybody does.
This site is free, you should go blog where it’s paid or else your own site and moderate it as you want.
With your comment you are sitting people up and they may have real issues. Just ignore
Friends
can u give me website for the study CCNP routing and switching part ………
Many thanks 9tut.com. and pass4sure
I passed 640-802 today with 900/1000
Sincerely yours
Julio Roa Mexico D.F.
HEY Friends !!!
I’m going to give my CCNA Exam in 2 weeks please post latest dumps
Email: irshad.hussain15@gmail.com
Hi guys I will be taking my ccna next month can you please send me the latest dump franky12u@yahoo.com
cleared my exam and i got the pass4sure dump from this link study material also
avaiable (( http://demo.urlshortenerscript.net/2f5 )) all the best.’
passed CCNA today. Q7 from here
hi folks sat ccna last week failed only by one mark can anyone tell me if they change the sims in your next exam i someone could email me back asap that would be great thank you.
thomasbulloch1988@gmail.com
HI anonymous, I failed ccna twice, you will get the sims exactly as you got on your first attempt, but the questions will be more difficult. it happened to me but I am using boson questions now and I hope to pass on Friday 20 th