CCNA – Drag and Drop 5
Here you will find answers to Drag and Drop Questions – Part 5
Question 1
Drag the Cisco default administrative distance to the appropriate routing protocol or route (Not all options are used)
Answer:
+ RIP: 120
+ OSPF: 110
+ static route referencing IP address of next hop: 1
+ internal EIGRP route: 90
+ directly connected network: 0
Question 2
Drag the term on the left to its definition on the right (not all options are used)
Answer:
+ poison reverse: A router learns from its neighbor that a route is down and the router sends an update back to the neighbor with an infinite metric to that route
+ LSA: The packets flooded when a topology change occurs, causing network routers to update their topological databases and recalculate routes
+ split horizon: This prevents sending information about a routeback out the same interface that originally learned about the route
+ holddown timer: For a given period, this causes the router to ignore any updates with poorer metrics to a lost network
Question 3
Drag the description on the left to the correct router mode on the right
Answer:
+ user EXEC mode: limited to basic monitoring commands
+ privileged EXEC mode: provide access to all other router commands
+ global configuration mode: commands that affect the entire system
+ specific configuration mode: commands that affect interfaces/processes only
+ setup mode: interactive configuration dialog
Question 4
Drag each definition on the left to the matching term on the right
Answer:
+ cost: a configurable value based by default on the bandwidth of the interface
+ load: the amount of activity on a network resource
+ bandwidth: the data capacity of a link
+ hop count: the number of point-to-point links in a transmission path
+ reliability: usually refers to the bit error rate of each network link
+ delay: the amount of time required to move a packet from source to destination
Question 5
Refer to the exhibit. Complete the network diagram by dragging the correct device name or description to the correct location. Not all the names or descriptions will be used.
Answer:
From left to right:
Router, DTE, DCE, CSU/DSU Synchronous, Digital Line, WAN Service Provider Network.
Question 6
Drag each feature on the left to the appropriate routing protocol on the right.
Answer:
RIP version 1
+ sends frequent updates
+ less complex configuration
+ susceptible to routing loops
+ exchanges full routing table in updates
OSPF:
+ faster convergence
+ uses only event-triggered updates
+ same topology information held by all routers
+ requires more memory and processing power
Question 7
Drag item on left to match item on right
Answer:
+ Point to Point Advantage: Quality
+ Point to Point Disadvantage: Limited Flexibility
+ Circuit Switched Advantage: Cost
+ Circuit Switched Disadvantage: Low speed
+ Packet Switch Advantage: Efficient
+ Packet Switch Disadvantage: More Complex
Question 8
All hosts in the same subnet with 172.16.5.118/26 must be denied Telnet access to hosts outside the LAN (u need to just drag & drop) fiil out the command. To complete the bracketed command, [access-list list-number deny tcp 172.16.5.address 0.0.0.mask any eq port], drag each appropriate option on the left to its proper placeholder on the right. (Not all options are used)
Answer:
+ list-number: 128
+ address: 64
+ mask: 63
+ port: 23
Thank you for the welcome.
thanx 9tut
how can i manage my revision mr.9tut
9tut is the best, one guy got question 4 in his exam, n he shared this information at the previous (drag n drop) group, then 9tut physically illustrate it very quickly….thank u very mcu
Thanx alot 9tut
I am planning todo my ccna exam.can upls update the questions
can someone please email the latest dump to me at nikos_g_s@hotmail.com..thanks!!!!
Can someome please send me latest dumps or there are new questions in the exam
amarjeet118@hotmail.com
can you please send me the latest dumps? tsuoshiro@yahoo.com thanks a lot =)
Thank you for being updated
please please some send me latest ccna dumps:mkisochi@yahoo.com
please, send me latest ccna dumps: janko25@abv.bg
And does anybody know when Cisco will change all the questions?
Can someone please send me the latest ccna dumps: silencer_316@yahoo.com
try out my VCEs here:
http://www.tinyurl.com/xallaxvce
refer to question4 can any one explain the defenation of Cost??
If anybody has anymore info to help me pass the CCNA exam, please email it to texray1014@hotmail.com. I’d really appreciate it.
Thanks.
Ray
thanks to u!!!!
Q:4 it’s really hard one :(
i need latest dumps pls send mr friends help me guys my email id is it.kavin@gmail.com
im gonna take ccna exam 4 days from now. can anybody send me the latest dump?
email add l1ttl3j0@yahoo.com
No dumps! Sorry… Know the concepts,.. don’t just learn answers!
i will taking my exam by next week, any dumps? please email me at cabjimmy@yahoo.com
Anyone know if these are the same questions for the icnd2?
hi, evryone,, m here jst to thank 9tut , passed ma ccna on 8th december, 2011, sims were acl,eigrp and vtp, vtp was little tricky , please read the questions fully, it will help best of luck for all ,,, 9tut rockssss
BIG UP — 9TUT this is the best site,… much appreciated…..
Thanks, for all the help,… !!!!
Hi guyz..I want to write ccna exam next moth…would you pls send to me he lastest dumps?
nassua@hotmail.com
Question #4 – the BANDWIDTH parameter is configurable but is COST? Example – OSPF uses a predetermined COST based on each bandwidth amount = NOT CONFIGURABLE, however everyone knows that there is a BANDWIDTH config-if command.
I think those 2 definitions should be switched, what do you guys think??
will i get sim question from NAt
q.1 is there for my todays xam
Hi 9tut… Hi Guys! Can you please help me… I will take exam this Feb. Please send me latest dump so that I will have an idea for the exam.. rico.blake@ymail.com
Thanks Guys!
Please donate 9tut.com ,, because this website is the reason you passing your exams respectively…. I aM just a researcher .. That’s all … Please make sure u send ur latest dumps to cigaltelecom@gmail.com .. Cheers ma man..
Best Site ever go 9tut.com Please donate.
Thans for upeeping the site. Great resource
Please some one mail me the latest dumps. Would be really grateful of you. Thank you. My emai id – amey2612@yahoo.com
THANK YOU 9TUT
Can someone send the latest dumps to tljames12@yahoo.com
dump dump dump! plz leave space for other comments, there is lot of dump source out there, search even google.
thanks for the site. This an excellent service and resource.
its so wonderful to see so much information put together meticulously…a great job done by the website…hats off…!!! thank u dear 9tut:) you are awesom!
can some wit the latest ccna dumps plz send them to:tejangas@yahoo.com
Passed my ICND2 today with a score just under 900. I had VTP, OSPF and Frame Relay…Found lot of similar questions on the exam which are here…Big THANKS to 9tut for all the stuff and great explanation…now on to CCNA VOICE…
Regards
Bob
Please send me latest DUMP to sited CCNA (802) exam:
poresh_05@yahoo.com
I am writing exam on the first week of next month can anyone send me the latest ccna dump on ramabolu@hotmail.com
i m not sure if the answer to q 4 is correct??i think that 1 and 2 need to be swapped??
what you guys think?
Hi all, I am taking CCNA 640-802 exam first time on 30/05/2012. Could anyone please send me latest dumps which are valid for UK? My e-mail address is puneet_gill84@yahoo.co.uk. Many thanks.
this dumps is very helpfull for CCNA-CLSP Exam
I PASSED CCNA EXAM TODAY THANKS TO ALL MIGHTY ALLAH
960/1000
Congratulations to Muhammad Rashid and to all who passed the ccna exam!
I am hoping and praying i will too…
Hi Muhammad Rashid, do you have the dump, can u share? Thanks and TC
I passed my ccna exam today Praise be to God! Thank you Jesus! and thanks to 9TUT for the tutorials and explanations, great site and thanks to xallax for your explanations to questions and thanks to http://www.examcollection.com for the dumps. Pls guys lets donate and help to keep this site up!
48 ques for exams including 3 simulation, I had EIGRP, Acesslist2 and VTP. Make sure the practice the simulation, use packet tracer or gns3. Best wishes to all!
@ 9TUT @ XALLAX
CCNA DRAG AND DROP QUESTION:
ADVANTAGE AND DISADVANTAGE of POINT TO POINT, CIRCUIT SWITCHED and PACKET SWITCHED
bandwidth, quality, delay, more flexibility, low speed, more complex, load, cost, limited flexibility, efficient