CCNA – Wireless
Here you will find answers to CCNA Wireless Questions
If you are not sure about Wireless, please read my Wireless tutorial and Basic Wireless Terminologies
Question 1
Which additional configuration step is necessary in order to connect to an access point that has SSID broadcasting disabled?
A. Set the SSID value in the client software to public.
B. Configure open authentication on the AP and the client.
C. Set the SSID value on the client to the SSID configured on the AP.
D. Configure MAC address filtering to permit the client to connect to the AP.
Answer: C
Question 2
What is one reason that WPA encryption is preferred over WEP?
A. A WPA key is longer and requires more special characters than the WEP key.
B. The access point and the client are manually configured with different WPA key values.
C. WPA key values remain the same until the client configuration is changed.
D. The values of WPA keys can change dynamically while the system is used.
Answer: D
Question 3
Which two devices can interfere with the operation of a wireless network because they operate on similar frequencies? (Choose two)
A. copier
B. microwave oven
C. toaster
D. cordless phone
E. IP phone
F. AM radio
Answer: B D
Question 4
A single 802.11 g access point has been configured and installed in the center of a square office. A few wireless users are experiencing slow performance and drops while most users are operating at peak efficiency. What are three likely causes of this problem? (Choose three)
A. mismatched TKIP encryption
B. null SSID
C. cordless phones
D.mismatched SSID
E. metal file cabinets
F. antenna type or direction
Answer: C E F
Question 5
Refer to the exhibit. What two facts can be determined from the WLAN diagram? (Choose two)
A. The area of overlap of the two cells represents a basic service set (BSS).
B. The network diagram represents an extended service set (ESS).
C. Access points in each cell must be configured to use channel 1.
D. The area of overlap must be less than 10% of the area to ensure connectivity.
E. The two APs should be configured to operate on different channels.
Answer: B E
Explanation
A group of access points connected to the same WLAN are known as an Extended Service Set (ESS). Within an ESS, a client can associate with any one of many access points that use the same Extended service set identifier (ESSID). It allows users to roam about an office without losing wireless connection -> B is correct.
Two APs operating near each other should be configured on different channels to avoid interference. There are fourteen channels defined in the IEEE 802.11b channel set. Each channel is 22MHz wide but there is only 5MHz channel separation so the channels are overlapped. Channels 1, 6 and 11 are most commonly used because they do not overlap as shown below:
So if we configure an AP with channel 1 then we should set its nearest AP to channel 6 or 11 to make sure their channels are not overlapped.
Question 6
What are three basic parameters to configure on a wireless access point? (Choose three)
A. SSID
B. RTS/CTS
C. AES-CCMP
D. TKIP/MIC
E. RF channel
F. authentication method
Answer: A E F
Question 7
What speeds must be disabled in a mixed 802.11 b/g WLAN to allow only 802.11 g clients to connect?
A. 6,9,12,18
B. 1,2,5.5,6
C. 5.5,6,9,11
D. 1,2,5.5,11
Answer: D
Explanation
The data rates of 802.11b are 1, 2, 5.5 and 11 Mbps using Direct Sequence Spread Spectrum (DSSS) while the data rates of 802.11g are 1, 2, 5.5, 11 Mbps using DSSS and 6, 9, 12, 18, 24, 36, 48, 54 Mbps using OFDM. So if we only want to allow 802.11g clients, just disable 1, 2, 5.5 and 11 Mbps speed.
Question 8
What is the maximum data rate specified for IEEE 802.11b WLANs?
A. 10 Mbps
B. 11 Mbps
C. 54 Mbps
D. 100 Mbps
Answer: B
Question 9
A wireless client cannot connect to an 802.11 b/g BSS with a b/g wireless card. The client section of the access point does not list any active WLAN clients. What is a possible reason for this?
A. The incorrect channel is configured on the client.
B. The client’s IP address is on the wrong subnet.
C. The client has an incorrect pre-shared key.
D. The SSID is configured incorrectly on the client.
Answer: D
Question 10
Which two features did WPAv1 add to address the inherent weaknesses found in WEP? (Choose two)
A. a stronger encryption algorithm
B. key mixing using temporal keys
C. shared key authentication
D. a shorter initialization vector
E. per frame sequence counters
Answer: B E
Question 11
What is the maximum data rate specified for IEEE 802.11b WLANs?
A. 10Mbps
B. 11Mbps
C. 54Mbps
D. 100Mbps
Answer: B
Explanation
Popular wireless standards are listed below:
* IEEE 802.11a: 54 Mbps in the 5.7 GHz ISM band
* IEEE 802.11b: 11 Mbps in the 2.4 GHz ISM band
* IEEE 802.11g: 54 Mbps in the 2.4 GHz ISM band
Question 12
You have finished physically installing an access point on the ceiling at your office. At a minimum, which parameter must be configured on the access point in order to allow a wireless client to operate on it?
A. AES
B. PSK
C. SSID
D. TKIP
E. WEP
Answer: C
Lol.
Someone ask Administrator for lates dumps
HEY! 9tut is good. Very good. Maybe not cover 100% but… Still THX for good explanations for examples.
Good write-up, I am normal visitor of oneˇs site, maintain up the excellent operate, and It’s going to be a regular visitor for a lengthy time. beats by dr dre http://pinterest.com/drebeatstore/
Please send me latest CCNA dumps event0311@gmail.com
Please share some explanation about Q9, is it really SSID mismatch?
zakir @ wifi confirm clients and server connection confirm mainly with service set identifier SSID
after at all it checks for keys .mainly first of all configure ssid correctly.
I need help to open the dump spike or shekter getting only 5 trial copy pls .
Q3 WAS ON MY EXAM TODAY
Big Dr. what is another plz ?
please send latest on imran.pathan89@gmail.com i want give CCNA certification exam in next month.
9tut really gr8 hats off for their work please send anybody the latest dump :bhattarai.mahesh@gmail.com
Indeed an interesting read. For a summary of all of the above concepts, please visit:
http://tutorializetech.com/ccna-wireless-concepts/
Regards,
Shah Hussain
Ηι everybody….i am giving CCNA in the very next days…so please send me some dumps.
Thanks in advance.!
likeaboss2386@gmail.com
q3 in today exam
Q11 Explanation:
I think there is something to correct. Pls. see below:
* IEEE 802.11a: 54 Mbps in the 5.7 GHz (ISM band) instead U-NII Band
* IEEE 802.11b: 11 Mbps in the 2.4 GHz ISM band
* IEEE 802.11g: 54 Mbps in the 2.4 GHz ISM band
new: IEEE 802.11n: 600 Mbps in the 2.4/5 GHz ISM/U-NII band
@Zakir Explanation:
Association (which SSID) comes first before Authentication. Therefore u need to connect first to the SSID before the password.
If the question needs two answers, the answer would be C & D. And since, answer only one, D is right.
I hope u got it.
Hello evrybds
I have a question for you, in exam there are simulated configuration of WLC or APs or only questions? If there are, exist an APs or WLC sw simulator?
I would like to give CCNA Wireless exam at the end next month, please could you send me the last dumps of it here:
birto@libero.it
Thanks
and Many many Thanks to 9tut, a great site.
in my mind, in normal CCNA (not CCNA Wireless), only questions
Question #10 was on my exam today.
hi,
i´m taking the exam this week.
please send me the latest dumps at helpfriends88@gmail.com.
thanks
Hi guys,
Any idea how to view VCE files? Any latest software for it? Thanks in advance..
i need a help i need latest ccna dump and i will appreciate that
this is my email mca.1990@hotmail.com
my exam is too close
thanks guys
can anyone send me at premshrestha27@gmail.com the latest dumps..my exam is on 10th of this month.
plz any one can tell me.
in which layer IPsec operate??
transport layer?
or network layer?
@Anonymous: IPsec is an industry-wide standard suite of protocols that allows secure data transmission over IP-based network that functions @ Layer3 (Network Layer).
but in visual cert exam suite ,they gave ans:trnsport layer
@forace
IPsec is an end-to-end security scheme operating in the Internet Layer of the Internet Protocol Suite
IPsec is on network layer in the OSI-model
That’s a creative answer to a difiucflt question
Is ICND2 harder or easier than CCNA
Can some one share 640-802 latest dump? I am planning to give the exam with in 2 weeks. Your help will be appreciated…
Can some one share 640-802 latest dump? I am planning to give the exam with in 2 weeks. Your help will be appreciated… my email id is cleetus2705@gmail.com
hi
if any one wants to download free visual cert exam manager for CCNA preparation.here is the working link.
http://fileups.net/file/0Re2j
q3 in exam today
Can you please send CCNA wireless dumps at panditume@gmail.com
Answer to question 10 should be A E. Can someone explain why is it BE?
i m joining the 9tut premier account but my country pakistan not in the list, plz help me,
Question 10…
WEP and WPA (TKIP) both use RC4 encryption.
i just did the exam today. (828/825)…the simulations where all from 9 tut….eigrp vtp and access list….the rest where most of them by this website…study this website good….:( i found it too late otherwise i would have gotten a higher grade…i wanted to ask whether cisco might ask me to redo the exam since this is just the preliminary score
My exam on Friday So help me GOD, AMEN
We are going to not publish reviews that connection to exterior website pages.
シャネル 財布 2013 http://chanel.onrain-shoppu.com/
Hello Guys I hope you will be fine there. I have CCNA (640-802) and CCNA security (640-554) Vouchers on special discount of 58% for World wide, with six months expiry date till you purchase. Each voucher cost 70USD.
Details Required For CCNA Voucher For Discount Processing:
1-Full Name. 1st Name & Last Name (as you want to appear on certificate & documents)
2-Country.
3-City.
4-State.
5-Pin Code (or Area Code)
6-Residential Address (or where you can collect your Certificate or further correspondence
can be received)
7-Date of birth
Add me on Skype through this information which is written below:
Skype Name: rockon660
you can also email me at this email address which is written below:
madeelqaiser@gmail.com
If you have any Questions feel free to contact me.
Thanks,
Best regards,
Adeel
i will be taking the 640 802 exams today wish me luck guys
thomas, how did u do on ur exam , tell us news :) what labs u had and if questions were kinda similar to 9tuts.. ? :)
I hv my exam next week pls send me latest dumps on dreamdesire01@gmail.com
I hv my exam next week pls send me latest dumps of CCNA 640-802 on dreamdesire01@gmail.com
hi, i´m taking the exam 12/09/2013. please send me the latest dumps at barakeeye@gmail.com. thanks
please send me the latest dumps have exame in setembor
djoliuson2012@hotmail.com
Good job 9tut as always.
Please send me the latest dumps as i’m taking CCNA exam soon.
mattsalman@yahoo.com
hi every one plzzzzz send me latest dumps ‘asimmajeed56@yahoo.c0.uk .I’m taking exam next 2 weeks