New CCNA – Drag and Drop 2
Here you will find answers to CCNA Drag and Drop Questions – Part 2
Question 1
The left describes OSI layers, while the right provides some terms. Drag the items on the right to the proper locations.
Answer:
Network Layer:
1) IP addresses
2) packets
3) routing
Transport Layer:
1) windowing
2) UDP
3) segments
Question 2
The above describes some categories, while the below provides their corresponding router output lines. Drag the above items to the proper locations.
Answer:
1) Port operational: Serial0/1 is up, line protocol is up
2) Layer 2 problem: Serial0/1 is up, line protocol is down
3) Layer 1 problem: Serial0/1 is down, line protocol is down
4) Port disabled: Serial0/1 is administrator down, line protocol is down
Explanation:
A simple way to find out which layer is having problem is to remember this rule: “the first statement is for Layer 1, the last statement is for Layer 2 and if Layer 1 is down then surely Layer 2 will be down too”, so you have to check Layer 1 before checking Layer 2. For example, from the output “Serial0/1 is up, line protocol is down” we know that it is a layer 2 problem because the first statement (Serial0/1 is up) is good while the last statement (line protocol is down) is bad. For the statement “Serial0/1 is down, line protocol is down”, both layers are down so the problem belongs to Layer 1.
There is only one special case with the statement “…. is administrator down, line protocol is down”. In this case, we know that the port is currently disabled and shut down by the administrators.
Question 3
A user is unable to connect to the Internet. Based on the layered approach to troubleshooting and beginning with the lowest layer. Follow the guide and drag the contents to relevant modules.
Answer:
1) Verify Ethernet cable connection: Step 1
2) Verify NIC operation: Step 2
3) Verify IP configuration: Step 3
4) Verify URL: Step 4
Explanation:
The question asks us to “begin with the lowest layer” so we have to begin with Layer 1: verify physical connection; in this case an Ethernet cable connection. For your information, “verify Ethernet cable connection” means that we check if the type of connection (crossover, straight-through, rollover…) is correct, the RJ45 headers are plugged in, the signal on the cable is acceptable…
Next we “verify NIC operation”. We do this by simply making a ping to the loopback interface 127.0.0.1. If it works then the NIC card (layer 1,2) and TCP/IP stack (layer 3) are working properly.
Verify IP configuration belongs to layer 3. For example, checking if the IP can be assignable for host, the PC’s IP is in the same network with the gateway…
Verifying the URL by typing in your browser some popular websites like google.com, microsoft.com to assure that the far end server is not down (it sometimes make we think we can’t access to the Internet). We are using a URL so this step belongs to layer 7 of the OSI model.
Question 4
The left describes the types of cables, while the right describes the purposes of the cables. Drag the items on the left to the proper locations. (Not all items can be used).
Answer:
1) straight-through: switch access port to router
2) crossover: switch to switch
3) rollover: PC COM port to switch
Explanation:
To remember which type of cable you should use, follow these tips:
- To connect two serial interfaces of 2 routers we use serial cable
– To specify when we use crossover cable or straight-through cable, we should remember:
Group 1: Router, Host, Server
Group 2: Hub, Switch
One device in group 1 + One device in group 2: use straight-through cable
Two devices in the same group: use crossover cable
For example: we use straight-through cable to connect switch to router, switch to host, hub to host, hub to server… and we use crossover cable to connect switch to switch, switch to hub, router to router, host to host… )
Question 5
The left describes the types of switch ports, while the right describes the features. Drag the options on the right to the proper locations.
Answer:
Access Port:
- Carries traffic for a single VLAN
– Uses a straight-through cable to connect a device
– Connects an end-user workstation to a switch
Trunk Port:
- Carries traffic for a multiple VLAN
– Uses 802.1q to identify traffic from different VLANs
– Facilitates interVLAN communications when connected to a Layer 3 device
Question 6
The above describes the Spanning-Tree Protocol port states, while the below describes their functions. Drag the above items to the proper locations.
Answer:
- Learning: populating the MAC address table but not forwarding data frames
– Forwarding: sending and receiving data frames
– Listening: preparing to forward data frames without populating the MAC address table
– Blocking: preventing the use of looped paths
may i know is it enough to study 200-120 old questions for new ccna (200-120) exam? Am I also need to study 640-802 questions?
@ Question 4, can not we use straight-through for PC COM port to switch ?
i need xplain pls….
plz any body send me a latest dumps of CCNA 200-120 exam ubaid_swati2009?@yahoo.com
@ jilla
PC COM port … means Console Port so we need console cable which akind of it is the rollover
@9tut
may i know is it enough to study 200-120 old questions for new ccna (200-120) exam? Am I also need to study 640-802 questions?
@Guman: You only need to learn questions of 200-120 to pass the new CCNA exam.
Hi, can anyone ps email me info on how to get the latest VCE 3.4.2 crack version or the version that can open recent dumps.
My email address is: mehdi01912330796@gmail.com
Thanks.
Hello Guys good news for you that CCNA discounted and Microsoft vouchers are now available. Now New CCNA (200-120) vouchers on special discount of 58% for World wide, with six months expiry date till you purchase. Each voucher cost 70USD.
Details Required For CCNA Voucher For Discount Processing:
1-Full Name. 1st Name & Last Name (as you want to appear on certificate & documents)
2-Country.
3-City.
4-State.
5-Pin Code (or Area Code)
6-Residential Address (or where you can collect your Certificate or further correspondence
can be received)
7-Date of birth
Add me on Skype through this information which is written below:
Skype Name: rockon660
you can also email me at this email address which is written below:
madeelqaiser@gmail.com
If you have any Questions feel free to contact me.
Thanks,
Best regards,
Adeel
Q1&2 were in today’s exam.
Hi im taking the icnd1 exam tomorrow,can you forward the latest dump to my email pls thank you.
nodebeanyaoku@yahoo.com
hi i am taking the icnd exam two days from now,could you pls forward the latesd dumps in my email.thank you.
mwangicaleb.cm@gmail.com
I have passed my 200-120 exam yesterday. I am willing to share the dumps. If you are interested please email me at gattumania@hotmail.com
@Gattu pls send me ccna 200 120 dumps
….mail me at erprakash76@gmail.com
@Gattu, Please send me the latest dumb for ccna 200 120 to karthi1503@yahoo.com.au
Going to exam in 2 days
Thanks in advance
Im taking the exam in two days.Can you please,send me latest dumps?
boka.sokola@gmail.com
some say to just study the site, why does everyone keep asking for the latest dumps,,, making me nervous… pls send the latest dumps as well pls- taking my test in two days suckafoo79@gmail.com
my friend just took the test, failed once, took it 6 days later, said the majority of his questions were on this site…
Q1 answer order is diff in many dumps pls tell right order tomorrow is my exam
@9tut – please let me know,can we use “TAB” & “?” in real exam? thanks in advance..
@shishir: Sometimes you can, sometimes you cannot. Please read our CCNA FAQs: http://www.9tut.com/ccna-faqs-a-tips
answer order is diff in many dumps pls tell the correct answer…as soon as possible
que. 1 answer order is diff in many dumps pls tell the correct answer…
question number one which is the order if:
Network Layer
Ip address
Packets
Routing
Transport Layer
windowing
UDP
segments
or would like this:
Network Layer
Packets
Ip address
Routing
Transport Layer
UDP
segments
Windowing
I wonder which of these two ways is the correct
Can i answer questions Like Q.1 by changing answer order with the right answer? At Exam Manager, it show I’m wrong, but i’m answering correct answer with different order.
@9tut
Same question with Nay and themaxter we want to know which is correct do we need to follow the sequence or sequence is not an issue?
As i have seen in question no. 5 its doesn’t follow the order for TRUNK PORT because the answer ” Uses 802.1q to identify traffic from different VLANs” comes first before ” Facilitates interVLAN communications when connected to a Layer 3 device”
Please refer here
Trunk Port:—> doesn’t follow the order
- Carries traffic for a multiple VLAN
– Uses 802.1q to identify traffic from different VLANs
– Facilitates interVLAN communications when connected to a Layer 3 device
Trunk Port:—> follows the order
- Carries traffic for a multiple VLAN
– Facilitates interVLAN communications when connected to a Layer 3 device
– Uses 802.1q to identify traffic from different VLANs
Please advise :)
Thank you very much
anybody plz share dumps for ccna200-120
sanesourav@gmail.com
@themaxter172 its the same
anyone? plz ans me wat s the cprrect ans for q1??? there s difrent 2 type of ans available wch order s correct for the xam?
Question 1 and 2 were in the exam recently
Hello Everybody
I m french (Normandy), anybody can send me the Dump for CCNA 200-120 ?
infopabx2013@gmail.com
Best regards
hi… please send me a dump for CCNA 200-120.. thanks… rhea_salvino@hotmail.com
Hi dear member 9tut. I wonder if there is a French version of the CCNA 200-120 exam because I’d passed the exam in French. I live in Ivory Coast
Hi
Im taking the exam next month.Can you please,send me latest dumps at yllkaajvazi@gmail.com Thanks…
please send me a dump for CCNA 200-120.. thanks behnam.zanjani@gmail.com
which order is correct for q1 please
Question #2 on my exam last Sunday, 2014/10/5.
Thanks a lot 9tut. Almost all questions were from here except for two.
Had the EIGRP and ACL 1 sims.
Can someone pls email me the new ccna drag and drop questions….i wanna c if i can not do it….on this email syleb1987@gmail.com
Q2 is the Exam question yesterday , Thnx 9tut
question 2 on exam today
q2 today exam
please send me latest dumps
sairam.paripati@gmai.com
q 1 today.
Some one pls help me with free VCE exam simulator. All links over the Internet is giving me errors.
Passed the exam yesterday. Got the Q4
plz any body send me a latest stable dumps of CCNA 200-120 exam nithincraju@gmail.com
can any body send me a latest stable dumps of CCNA 200-120 exam nithincraju@gmail.com
Why cisco still stuck in Legacy..(Straight cable or Cross cable).. now in modern technology straitgh & cross cable doesnt matter. Switch port are enough intelligent to detect the type regardless of cable type.
Raghu
Q1 and Q2 today
A doubt regarding Question1 and Question5.
I answered a question in watsons dumps(same as Q1) in the sequence they appear in the question, which is the same way it is answered here on the site. But the order in which the options were there in the question is different in both of them… So im thinking that such questions should be answered in d same sequece given.
But now im confused seeing Question5 here where the sequence of the answer for trunk port is not in the same sequence as the options given in the question.
Need advice, please help
1) Is this a bug in the dump\vce file?
2) Is the sequence not important in the actual exam as long as im answering it correct?
Ashwin i think its a bug in the vce. answering the question correctly is what matters the sequence doesnt play part here