Home > New CCNA – New Questions

New CCNA – New Questions

November 5th, 2013 Go to comments

Note: If you are not sure about EtherChannel, please read my EtherChannel tutorial.

Question 1

Etherchannel question: You are given sw1 and sw2. The output of show etherchannel summary and show interface fa0/1. What is the cause of the problem? in exhibit, switch a cable is 100mb/s speed and b is 10mb/s. If you can look very carefully, there is speed mismatched to cause that problem. I selected “speed mismatch”

Question 2

Q2 (Etherchannel Questions that goes like this)
Refer to the exhibit. Etherchannel has been configured on Switch1 as shown.

Switch1# conf t
Switch1(config)# interface range gigabitethernet 1/1
Switch1(config)# Channel-group 5 Mode “AUTO”
Switch1#
Switch1(config)# interface range gigabitethernet 1/2
Switch1(config)# Channel-group 5 Mode “AUTO”

Which is the correct command set to configure etherchannel on Switch2?

A.
Switch2# configure terminal
Switch2(config)# interface range gigabitethernet3/1 -2
Switch2(config-if)# channel-group 5 mode auto

B.
Switch2# configure terminal
Switch2(config)# interface range gigabitethemet3/1 -2
Switch2(config-if)# channel-group 5 mode passive

C.
Switch2# configure terminal
Switch2(config)# interface range gigabitethernet3/1 -2
Switch2(config-if)# channel-group 5 mode desirable

D.
Switch2# configure terminal
Switch2(config)# interface range gigabitethernet3/1 -2
Switch2(config-if)# channel-group 5 mode ACTIVE

 

Answer: C

Good resource: http://www.cisco.com/en/US/docs/switches/lan/catalyst3550/software/release/12.1_13_ea1/configuration/guide/swethchl.html#wp1028480

Question 3

Which OSPF command turn OSPF on all interfaces of a router?

Answer: network 0.0.0.0 255.255.255.255

Question 4

Network admin creates a layer 3 Etherchannel, bounding 4 interfaces into channel group 1. On what interface is the IP address configured?

A. the port-channel 1 interface

B. the highest number member interface

C. all member interfaces

D. the lowest number member interface

 

Answer: A

Question 5

3. What is the authentication type of SNMPv2?

A. Community Strings
B. HMAC-MD5
C. HDMAC-SHA

Answer: Community string

Question 6

What parameters can be different on ports with an Etherchannel?

A. speed
B. trunk encapsulation
C. DTP negotiation setting
D. duplex

 

Answer: C

Comments (908) Comments
Comment pages
1 13 14 15 16 17 19 1994
  1. how….
    January 16th, 2015

    what’s with question #3 ?

  2. Abdeali Dodia
    January 17th, 2015

    send me pls
    latest dumbs
    abdealidodia@gmail.com

  3. murad
    January 19th, 2015

    Q4 in my exam today . I passed.

  4. Rahim Afridi
    January 22nd, 2015

    please send me the latest ccna dumps 200-120 i am taking exam in early feb r_afridi420@hotmail.com

  5. Anonymous
    January 23rd, 2015

    Hi, can you pls mail the latest dumps to me as well… the wquestions here seem quite different from the ones i have gone thru. my mailid is nkhuntia29@gmail.com

  6. Arpita
    January 26th, 2015

    pls mail the latest dumps. Will be giving the exam at february end.
    email id- vartakarpita11@gmail.com

  7. Anonymous
    January 26th, 2015

    please send me latest dump on tehminatoufiqkhan@gmail.com

  8. darko
    January 26th, 2015

    dose anyone have new dumps, im gonna take certifi-exam on may 10-th. Can someone reply and share some dumps, Thanks ! :)

  9. joshan
    January 26th, 2015

    Plz send me latest dumps at this email.pk99765@gmail.com

  10. Muzzamal
    January 27th, 2015

    I have the CCNA latest Dumps if any one wants
    contact me muzammil181@gmail.com

  11. Baichtilika
    January 28th, 2015

    Hi Muzzamal! Could you please send it my way? fbaichtilika@ymail.com
    I just sent you an email as well. Thanks!

  12. bernado ledato
    January 28th, 2015

    please send me the latest dumps writing mid february . studioaudio2@gmail.com thanks

  13. Anonymous
    January 29th, 2015

    I passed my exam on 21/1/2015…scored 1000/1000. Thank you 9tut!!

  14. Haider
    January 29th, 2015

    Kindly send me latest dumps at engr.zulqarnain110@gmail.com

  15. Milton M
    January 30th, 2015

    Hi, can you pls mail the latest dumps i will have the exam mid February.milton.matos@hotmail.com Thanks

  16. Anonymous
    January 30th, 2015

    hello every one. if someone has latest dumps please send me
    EMAIL: mukesh.kumar9218@gmail.com

  17. Rani
    January 30th, 2015

    Hi friends. I am newly graduate and want to pass CCNA. Please any can forward me latest CCNA dumps at : raniagarwal31@yahoo.com. Will really appreciate. Thanks.

  18. Anonymous
    January 31st, 2015

    i want least dump and vce 1.2 for my mail tiger_samy_007@yahoo.com

  19. Anonymous
    January 31st, 2015

    Q6, scored 958/1000. Thanks 9Tut!

    I also got some new questions today.

    First one asked something along the lines of “What would happen if you tried to use private addressing scheme on the internet”? The answer was something like “The private addresses would not be routed by the ISP backbone”.

    There was another one that asked for the correct OSPF commands if you wanted to add the 10.4.1.0 network in area 0. It wasn’t multiple choice and the correct answer was:

    router ospf 1
    network 10.4.1.0 0.0.0.255 area 0

    or something like that.

  20. viky
    February 1st, 2015

    vickey_1@hotmail.com plz plz plz send latest CCNA dumps i have paper at 16 Feb. its my second attempt

  21. Eric
    February 2nd, 2015

    Hi friends. Someone pliz send me Dumps and latest exam material
    EMAIL:ekihungi@gmail.com

  22. borishitz
    February 3rd, 2015

    hi guys am taking my exams early next month pls can any one send me dumps of the latest exam materials
    EMAIL:borisamahson@yahoo.com
    thanks

  23. Neha
    February 3rd, 2015

    plz send me the latest dumps i have my exam on Feb13th nehavarma772@gmail.com

  24. ntz academy
    February 4th, 2015

    passed today 986. 9tut got all for those who want to pass

  25. Akki
    February 4th, 2015

    Hi there, Please send me the latest questions.. I’m taking this exam next week. My email is akki7010@gmail.com. many thanks

  26. David
    February 4th, 2015

    Hi guys , can someone please help me for question 2 .
    According to the resource link answer C is good but D should be good also no ?

  27. Hello
    February 4th, 2015

    new dumps can be found here: http://www.filedropper.com/p4sccna200-120byevilnet69

    I got my CCNA today finally!! Thanks 9tut!!

  28. stephen G
    February 5th, 2015

    @david

    D is not correct because q2 uses PAGP protocol that uses : on, desirabe ,auto

    D is correct if sw1 used passive since sw2 used active, by the way this protocol is LACP

  29. Bruno
    February 5th, 2015

    Hi friends, can anyone send me the ccna Dumps?
    I have exame this month, please help me
    DO anyone knows if the questions version is going to change?
    Its being V5.0
    Maybe it will change this saturday, the Cisco say it goes with site dow «n for some time…

  30. Anonymous
    February 6th, 2015

    please send me the latest ccna dumps 200-120 i am taking exam in early feb lacostar4@gmail.com

  31. Anonymous
    February 7th, 2015

    please send me latest ccna dump 200-120 taking exam next week knockcree1@yahoo.com thanks

  32. Anum
    February 7th, 2015

    Q4

  33. Ant
    February 7th, 2015

    Hi friends. Please send me latest ccna dump on ant98147@gmail.com
    Thanks in advance!!!

  34. Anonymous
    February 7th, 2015

    Please,send me the latest dumps

  35. Ali mazhar
    February 8th, 2015

    plz send ccna dumps latest 2015

  36. Ali mazhar
    February 8th, 2015

    alimazhar1993@yahoo.com plz send ccna dumps latest 2015 ..

  37. Aikay
    February 8th, 2015

    Hi, I am reading and planing taking ccna exam by April. Please I need dumps. send to ikennaikedz@gmail.com

  38. Seun
    February 10th, 2015

    Pls send me latest dumbs. seun_oluwo@yahoo.com

  39. oluwakayode
    February 10th, 2015

    pls send me the latest dumps i’m having my exam in two weeks time. sharnkhy@yahoo.com.
    thank you

  40. altaf
    February 10th, 2015

    Q5,Q6 in todays paper…9tut

  41. u3ver
    February 10th, 2015

    please share some latest dumps
    u3verreg@gmail.com

  42. Nith
    February 11th, 2015

    Hi all, I will be taking CCNA in March 2015. Please email me the latest dumps at nithyanathan1990@gmail.com. Thanks for the share.

  43. Bakytzhan
    February 11th, 2015

    please share some latest dumps s.bakytzhan94@gmail.com Thanks for the share.

  44. Anonymous
    February 11th, 2015

    Hi all, I will be taking CCNA in March 2015. Please email me the latest dumps at ashmelrufat@yahoo.com. Thanks for the share.

  45. 9da
    February 12th, 2015

    Hi,

    In Q3 , should it be network 0.0.0.0 255.255.255.255 area 0? or just leave it without area 0 statement?

  46. Ayaz
    February 12th, 2015

    Hi this is Ayaz..
    And completed CCNA Course from Jetking..
    Now I planning to get exam in a month..
    So can anybody help me ?
    Tips.. How to prepare.. And brain dumps.. Etc..
    My email id is
    ayazpasha9999@gmail.com

  47. Che
    February 15th, 2015

    Q1 on 15th Feb.

  48. Simon
    February 16th, 2015

    Hi this is Simon and i want to taking part in the CCNA exam next month.
    I dont know if somebody read this and could support me with the latest dumps?
    This would be absolutely great!!!
    simon.sitter@googlemail.com

  49. Anonymous
    February 16th, 2015

    I passed CCNA this morning. 958/1000 ! Thanks to 9Tut!!! :) :)
    1 new questions (out of 51) which was not in 9Tut.
    One new question was about the difference between OSPFv2 & OSPFv3.
    2 SIM (ACL and EIGRP sim)
    Be aware that during the SIM, the ? can be used ! :)

    Advice : Only use 9tut questions. Do all questions. 98% of the questions are in 9tut ! Don’t bother with the dumps…
    9tuts only … do all the testS and you will succeed…

  50. Yannick
    February 16th, 2015

    I passed CCNA this morning. 958/1000 ! Thanks to 9Tut!!! :) :)
    1 new questions (out of 51) which was not in 9Tut.
    One new question was about the difference between OSPFv2 & OSPFv3.
    2 SIM (ACL and EIGRP sim)
    Be aware that during the SIM, the ? can be used ! :)

    Advice: Only use 9tut questions. Do all questions. 98% of the questions are in 9tut ! Don’t bother with the dumps…
    9tuts only … do all the test and you will succeed…

Comment pages
1 13 14 15 16 17 19 1994
Add a Comment