Share your (new) CCNA Experience

@9tut I know that. Maybe my explanation was not that good. My point is that anyway using wildcard or not the adjecy will form. But the simulator will grade it ??? I’m going to take my ccna on friday so i’m doin the final retouching.

thanks!!

Guys today i passed my CCNA Who ever is giving test now please do consult Watson dumps….
Thanks @9tut you are great…

Best of Luck!!

@Anup Yes, 9tut should be enough to pass. I also watched CBT nuggets and have quite a bit of experience in networking, but you should do fine with just 9tut. Study, study, study.

The labs were a joke honestly. No configuration required, which is kind of a bummer since I spent so much time on config labs. All of them just required running show commands and answering questions about the configurations. Like why aren’t these two routers forming a neighbor relationship, what is the dlci for this remote router, and what route will a packet take if going to X network.

thanks for the dumps nili

thanks nili`

thanks alot nili

*********IMPORTANT UPDATE**************
===================================
Hi guys, especialy admins, please have a look at my post because I passed my exam today and I have some updates for your questions.

1. DHCP question 4. It’s already fixed. The word ‘another’ was missed in one of the answers before.
2. ACL SIM, Q3. Should be ‘ip access-group 115 in’, not ‘access-group 115 in’! That command would allow the access only from x.x.x.0 address, but this is unrealistic as this is a subnet address for this interface, so the only answer is A.
3. There was a new question not covered here. Sounded something like this:
What could be different on the etherchannel group?
- speed
- duplex
- something VTP related
- VLAN tagging

As always, this questions was not clear – like, whether speed should be the same on each link or the whole group, so it’s hard to come up with a right answer but anyway, hope this helps!

Hi guys, i have been trying to open watson dumps from exam collection. It is giving me an error saying “This File was created with a newer version of Visual CertExam than you have. Please download the latest version”. Even though i have the latest version.
Please advise what wrong am I doing??
I really need to sort this out. Any sort of help is appreciated.
the version i have is 3.4.2

@mannyoz

latest dump is 1.0.2 pro
you search in a google
download vce 1.0.2 pro

@ajay

Thanks mate! appreciate the help. It’s all working now.

I’m goin to take my exam tomorrow. Any new modification ? Studyin watson and 9tut is ok ? thanks in advance.

Kindly friends i need your help and aswell as i need latest CCNA dumps

@ curious.. yes i got from other members dumps. So if anyone’s wishing the dumps email me @ alinciprianmorar@gmail.com

@ John tt was really fast man…

any news ? changes ? i’m takin it tomorrow..

@Member please do give a feedback once it is done…me taking test next week
thank you

Hey!!!

I passed my test today with 917 score.
ACL 1 no modification
ACL 2. Host B should access Webserver on www and all other access from host B must be blocked.
All other hosts on lan and root network should not access web server(any type of access)
All hosts will access all other servers any type.

EIGRP.
AS 22 and two networks needed to be insert on main router .

pass

@RJP

how was your exam ?

@Rawal: congratulation!

@rawal.. and the question we’re simillar to these on 9tut ?

Alin, the reason I failed to get 100 score because I got 40% in Wan technologies and checked wrong options because options were quit confusing with three or two to select most of the time.

NS32 and examtut 278 worked for me. some of the questions I found quit challenging and and some were so easy with just one option to select. There were many Exhibits questions, drag and drop as well.

thanks mate! cheers

@rawal u mean there were new questions?

took exam today – 12 jun 2014

ALL questions were from this site

Labs were EIGRP, ACL1 and ACL2. All with minor variations in subnet numbers, AS numbers, etc. but the concepts remain the same

passed with 958/1000

any secret to get 1000/1000?

Thank you 9tut

I passed today with 1000. Few new questions like etherchannel and SNMP

Bunch of idiots requesting dumps. First graspe whole CCNA concept then week before exam cream this dumps, and stop requesting it.

answered CCNA yesterday.Got 986.
Did Watson, Examtut, NS32 q and labs from 9tut.
lab sim-Eigrp, acces-list and access list 1.
thanks to exam collection and 9tut.
really very helpful materials.:)

Passed today June 13th!!!!!

Thank You very much 9tut for this amazing website.

Whoever is going to take the exam: Just spend more time for labs when practicing and also on the test. Practice, Practice, Practice.

Again, thank you very much 9tut.

an new question these days please share recently exam givers please !!!

Can anyone tell me regarding ipip vpn tunnel troubleshooting what is the code and where can i practise? is there any site for real labs and troubleshooting?

Thanks!

@Joffrey

Regarding your question for ETHERCHANNEL. It’s clearly mentioned in the book that for a physical link to be in an etherchannel, following should be same

a. SPEED
b. DUPLEX
c. OPERATIONAL STATE(TRUNKING/ACCESS) > if all access/trunk then new member should be access/trunk port
1. ACCESS VLAN (VLAN no. should be same for all physcial links)
2. FOR TRUNK
i. ALLOWED VLAN.
ii. NATIVE VLAN
d. STP INTERFACE SETTINGS(meaning cost/bandwidth/etc)

Hope it clears your confusion. so the answer appears to be “something vtp related.”

@avi

If you have understood the concepts. Look into dumps and labs , then you will be pass. All the questions come from dumps but remember you are here to understand the dumps not cram it.

Alhamdulillah, I passed my CCNA today with 890 score.

LABS are
1. ACL 1: no modification
2. ACL 2: Host name is changed i.e Host B, rest is same.
3. EIGRP: same just named the router.

hey any new question

hello guys , 9tut admin

At many places question 7 of ipv6 about migrating from ipv4 to ipv6 , i m seeing ans A,B,F … can any1 confirm it

I am sorry fellows for the wrong answer for the previous question posted by Joffrey, the answer is clearly VLAN tagging. As vtp related intended for access/trunk states etc. clearly i wasn’t thinking clearly.

guys wat are the drag and drops u are getting in the test?

Hi Guys,

Can someone please provide me link for FREE download of latest version of VCE. I am trying to open Cisco.Actualtests.200-120.v2013-12-10.by.Watson.314q.vce , But keep getting error.

ITS URGENT! i AM TAKING EXAM IN 3 DAYS TIME!! PLEASE HELP!!!

any vce for win8 to open file???

Anyone have free VCE Exam Simulator for win8 that I can use please. Thanks guys.

Ok got it… just googled around.

pls i need the lastest vce and dumps pls can anyone help. messyracheal@yahoo.com

@manoj ram

u search in a google
download vce 1.0.2 pro

Congrat to people who passed!! Are there a lot of questions on IPv6?

please is the ACL 1 simulation questions ? how questions under ACL 1? PLEASE I NEED YOUR RESPONSE OOO

guys who took the test today or recently please share the experience…taking test on wed…nervous!!!

Hi,

Today i have cleared CCNA exam,.. 1000/1000. Thanks to 9tut.. its very useful for the exam prepartion.

rakesh share ur study material . which dumps u consider and did subnetting q match from 9 tut