Share your (new) CCNA Experience

anyone can tel me how to open wotson question pool? i got a error message version mismatch.

6 days ago they released new version of VCE simulator (1.1), so you cant open any vce files without cracked or legal version

I want a craked version of the new vce … please send me on amro.amrawy@gmail.com

Yar Ali Ahsan its old CCNA my brother …. prepare new 200-120 CCNAX it is some how change form the old ccna 640-802

I will take exam in comming days.. plz give suggestion which labs will surely come in CCNAX 200-120

passed with 1000/1000 tried to slow down but finished way early. all 9tut, did not do quizzes, did not do dumps but studied many months before 9tut. EIGRP same idea but looks different. ACL1, ACL2 mod 3. 1 easy drag and drop cabling. very little subnetting but you need to know it. understand don’t memorize because you’ll get nailed in the job interview. good luck everyone and THANKS 9tut!!

Anonymous EGRP What’s the difference then? Can you post the Drag and drop question ?

Please send me dumbs on amro.amrawy@gmail.com

@Jim’s the difference is in the arrangement of the topology, in 9tut you clearly see the main router but it wasn’t so clear on exam. D&D 4 Q3 but not last 2 slots, but be aware that not all exams are same.

Hi
Everybody!!
I’m preparing for CCNAX (200-120). I need a latest dumps for exam>> Please send me dumbs on
thefriend49@gmail.com

Hello everybody, Firtst of all, I passed my exam couple hours ago and I need to tell everybody this, ” THIS IS THE BEST $9/MONTH FOR TWO MONTHS I HAVE SPENT” 9tut is the best. 95% of the questions are here, if you want your CCNA, do all the quizzes and SIM. I was worried because people are talking about dumps and never knew what are those, just do the quizzes and SIM…word of caution; ACL1 question #3, I select D since 10 permit ip 0.0.0.0 255.255.255.0 any is checking for the last octect and in this case it matches IP 10.4.4.0

To pass the exam, there is no need to buy anything, just pay $ 9 a month, study up and that will be it.

By the way, EIGRP looks different because they put the broken link between HOME2 and the ISP. To verify your work, just ping the IP for the ISP from the one that originally was not connecting.

The labs were, ACL1- no configuration, just answer thw questions, ACL2, EIGRP with the slightly difference of broken link between the HOME2 and ISP which is two routers away.

The labs were, ACL1- no configuration, just answer thw questions, ACL2, EIGRP with the slightly difference of broken link between the HOME2 and ISP which is two routers away.

Common people… stop wanting everything handed to you…. If you don’t know the concepts then you need to study. Memorizing isn’t gonna help you on a job interview and yes you need to know subnetting and variable subnetting. Just freakin’ study!!! It’s not that hard!!!!!!!!

Enough said!

And Rob, If you have to ask what subnetting questions are on the exam… then you’re not close to ready…. Just know how to subnet then it won’t matter what questions are on the test.

@anon I do know how to subnet, just getting anxious on how I know im ready to take the exam.

@anon, why don’t you tell us how you really feel :^) I’m the anonymous that got 1000/1000 mentioned above so you’re preaching to the converted, and if anyone cares, yes I’m a girl!

where is the training material?

@Grateful, pinging is good, but when I saw the proper adjacency’s come up, I figured it would be right and moved on. Maybe that plus a ping would be double safe.

So what does a broken link btwn 2 routers in EIGRP signify? What ar u supposed to do then?

Passed exam today 1000/1000

Please can anyone tell me which is latest & valid Q&A (vce file) for CCNAX 200-120?
Please send email nvdakh79@live.com

I will be very thankfull. Need badly CCNAX 200-120 Q&A….. !!

passed the ccna exam with 986 marks on 2nd august
i studied Watson 314,gillbeast299 and mathew319.
and simulations were acl1,acl2(mod 3) and eigrp
in eigrp u need to remove one network from main router after changing the as from the new added router…
u will find an extra network in the main router.
thank you 9tut.. :)
good luck guys..

Hello guys, is there any drag and drop in the exam? Thanks

@Lil yeah atleast 2 drag and drop, in my exam i experienced 2 drag and drop

Drag and drop from 9tut also? thank you for your response Amen! I have my exam this Aug 7. A little bit nervous and excited. :)

cleared my CCNA today.
watson dumps still valid just a twist in one question, a question with ospf router id, click on the highest loopback and not the 172.16. ….. that’s use in the dumps
sims were ACL1, ACL2(mod 3), EIGRP (wrong AS on d campus router, incorrect IP on d campus router simply remove and add d correct IP)
just a new question from etherchannel, just look at d exhibit then answer correctly, mine was channel 2 mode passive
and of course I had 1000/1000
big thanks to CBT nugget Jeremy, sybex Todd lammle, Watson, 9tut and of course God
Alhamdulilah

@slim
Do u think if we do watson 300 questions is it enough for CCNA exam ?

Any other suggestion i am planning to book my exam next week.

Thank you

After host A pings host B, Which entry will be in the ARP cache of Host A to support this transmission? Both hosts are in different subnets.

@hari
to a certain level it seems feasible to study d Watson dumps, memorise the answers and still pass slightly above 825 since one of d sim(ACL 1) is verbatim, but u might not b able to interprete the other sims (ACL 2 and EIGRP) because u need to understand d concept.
above all I strongly advise u to study some CCNA materials so u can defend ur certificate anywhere and anytime. All d best whenever u decide to write d exam

I passed yesterday with 945/1000.. I study Watson dumps, sims about EIGRP, ACL1 and ACL2 !

@mapeps – the ip and mac of host A’s default gateway. remember that ARP operates on the local network segment only; host B is in a different subnet, so the ping request from host A to host B needs to go to host A’s default gateway

@hari @slim if you memorize Watson dump and pass exam, you have CCNA cert but not CCNA knowledge and that may be very clear in interview or job so be careful about only memorize! not good idea

@Anonymous Host A’s Arp cache entry answer for Watson dumbs is different from Pass 4 sure dumbs. Which is which now ? What is the default maximum equal cost paths that can be placed in the routing table of an ospf router? I understand you got 1000/1000 want to write exam tomorrow help me please ??

can some one share at link or the dump
joaquinemail@yahoo.com

will truly appreciated

latest VCE Exam Simulator PRO 1.1.1 download crack
http://4routing.com/vce-exam-simulator-pro-1-1-1-download-crack/

NO INSTALLATION NEEDED if you can open directly the player from the crack folder!

Passed with 1000 score

Lab was EIGRP ACL ACL2 Mod2

only dump watson is enough

4 new question about snmp and etherchannel, i take a CCNA class that why i can answer them, pls ensure you have some knowledge before enter the exam, i think it will change soon

Jim’s August 5th, 2014
@Anonymous Host A’s Arp cache entry answer for Watson dumbs is different from Pass 4 sure dumbs. Which is which now ? What is the default maximum equal cost paths that can be placed in the routing table of an ospf router? I understand you got 1000/1000 want to write exam tomorrow help me please ??
Anyone out there with correct answers Want to take XAM today afternoon

@Jim’s

cost paths question

The answer is 4. You will not even get a option for 8.

@Jim’s

Arp cache question: 9tut is right.
Answer is (D) 192.168.6.1 000f.2480.8916

yes….. @Ciscowatch @ Jims answer D is correct………. :-) Good Luck guys…

slim, in the eigrp sim you said that there is wrong ip address, is it on a interface for network statement?

slim , with eigrp sim is the wrong IP on an interface or is network statement that is wrong ?

Thank you 9 tut. I’m not only passed the exam. I got a perfect score. Thankyou for all the tutorials. 9tut is the best.

Godbless to all the CCNA takers.
Believe you can. And You CAN

#GloryToGod

Hello 9tut.
I have a query on the below frame relay question.

Which two statistics appear in Show Frame-Relay Map output (Choose two) ?
The coorect answers are E & D
E. The status of the PVC that is configured on the router
D. The value of the local DLCI

My questions are ?

1. Please see answer option D above. is the value of Local DLCI a “STATISTICS” ?
2. Please see the answer option E above. Is it possible to “CONFIGURE” status of PVC ? Which command can be used to “CONFIGURE” the status of PVC from say Active to Inactive or vice versa ?

Why are those people who prepare the CCNA questions, so bad in English Language skills ?

Helloooo finally i had my exam yesterday 986/1000

ACL SIM 1
ACL SIM 2 mod 2 whit a different ip address
EIGRP NO ROUTE 22 ROUTE 12

no IP V6 1 drag and drop, thanks 9tut all questions from here and watson, i think the exam change soon.

bye all

hello@ dicahph can i get the dumps pls i want to write my exam this week