Share your (new) CCNA Experience

http://youthsalary.com/?user=2229

Link to sure material sources.

Hello any info if d question has changed ?

http://youthsalary.com/?user=2229

Link certified material sources

Thanks to ALLAH i passed the exam today 986/1000.
sim ACL (1) , ACL (2) & EIGRP with AS 12 also change IPs.
Thaaaankksssssssssssssss 9tut …… ummmmmmmaaaaaahhhhhhh !!!!!

All the praises and thanks be to Allah, I passed my CCNA exam today with 1000/1000.
eigrp AS number changed,
ACL 1, same questions.
ACL 2 with new addresses.
all quiz from 9tut, And no drag and drop question. and i am very happy.
Allah bless you all.

ali

I passed the exam today, sim ACL1(same), ACL-2(Mod3, new addreses), EIGRP change te AS new question with etherchannel and OSPFv3
What are 2 differences when comparing OSPFV3 and OSPFV2 ?
1. OSPFv3 is advertised on per-interface basis rather than networks.
2. OSPFv3 facilitates ipv6.

Thanks 9tut.

Hi everybody
I passed the exam today, sim ACL1(same), ACL-2(Mod3, new addreses), EIGRP change te AS.
3 or 2 question drag and drop question and everything is on 9tut.

good luck guys and girls!!

Greetings from Latin America.

From where can i get these cisco lab sims… Acl 1, Acl 2 and eigrp ?

Hi guys 9tuts, I didn’t know this site existed before taking my exam 4 days ago. I got 821. I am not very happy with myself and I would like to retake next weekend. Pls send any possible help link to mistadavemagnate@gmail.com I am willing to subscribe if any. Thanks

ip addresses are change only on simulation question or also in simple questions ?? tomorrow is my exam

Passed the exam 960/1000. thanks to watsons, 9tut :)
sim ACL 1, ACL 2 & same EIGRP lab with AS 12 change IPs, topology changed.

Hello.. need some info please..

in the EIGRP AS mismatch lab, the link to the internet 198.0.18.0 is being advertised via EIGRP and also “passive-interface serial 1/0″ command has not been applied. Which means EIGRP updates are being sent on the interface which connects to the internet. As per best practices we should not advertise local area updates on the links to the internet, so in the exam do we need to add the “passive-interface serial 1/0″ command or do we need to remove the network 198.0.18.0 from EIGRP process, add a default static route and then advertise it through EIGRP?
Or just leave it altogether :)

@Rafay in EIGRP AS mismatch lab you don’t have to configure internet links. Just correct the mismatch AS number and add networks on one network and add missing network on second router, that’s it. you don’t have to configure networks
Ex: Home1(config)# Router eigrp 212
network 192.168.60.0
network 192.170.60.0
Home2(config)# Router eigrp 212
network 192.168.60.0

Rafay,

In my exam, I saw that command in the interface for fa0/1. I just disregard it, since it says S1/0 and not Fa0/1. It will not affect the actual connection. Ive got 1000/1000 by the way.

Thanks 9tut! More power

bonjour, je dois passer exam ce 18 fevrier alors est ce que je dois reviser tout ces qestions et aussi est ce qu’il ya des labs ou on doit configurer ou juste des corrections de questions

what link can help me pass exam

Hello Guys. Please let me know is 9tut enough to pass exam or do I need some dumps as well ???

@9tut

Can i use my debit card to send the $9?

salamat shbab
what can i do to pass ccna exam??

any update from those who did the exam today ?

Passed today with 1000/1000. Sim ACL1, ACL2 with Mod 3 and EIGRP (other AS number). Almost all questions from 9tut.

@napoleon at ACL2: did you use permit ip any any or permit ip any host ‘public web server’ ?
Thanks

when is cisco coming with new ccna questions set ?

Hi,
In OSPF question , should it be network 0.0.0.0 255.255.255.255 area 0? or just leave it without area 0 statement?

@9da .. you cannot advertise a network in ospf without specifying the area..

@Adriano .. I asked another guy and he said he used permit ip any any..

Hi everybody here Alhomdu Allah I pass today .
But I want help me how can take certification..

@Adriano … I used access-list 100 permit ip any any

guys if i go thru all the questions listed here for exam 200-120 I should be able to pass the exam?

Hell yea! today i owned, sim EIGRP AS, ACL 1 and 2, some drag and drop. tap was working in the simulations, ty 9tut. I passed using Nuggets, Konrad (100% questions from here) and Sybex CCNA 6th edition by Todd Lammle (really nice book i recomend for anyone).

I passed CCNA with 1000/1000 … ACL 1, ACL 2 mod 3(server ip is 172.22.163.17 and host D is 192.168.33.4) , Eigrp with AS number 112….
All from 9tuts…..konrad…

hei. i passed my exam today. my score 1000. thanks 9tut ans my all friends
ACL1,ACL2 MOD3 AND EIGRP 112

Go through 9 tut most of the question will be asked in exam exactly the same.

Hi! Passed on Thursday, February 12th, 972/1000!! ALL, I repeat, ALL the questions are here on this site, you just need to study it, understanding them well and you’re ready!! I had EIGRP troubleshooting sim (simple, as wrong on the new router and a missing network in the existing router), ACL Sim as here on the site (the one with the 10.4.4.3 ip address… I FOUND EXACTLY THE SAME SIM!!) and a second ACL Sim (three commands ACL to be applied on the interface of the router, exactly as you can find here on the site… maybe different IP but the rest is right the same!). Don’t be afraid, just keep calm, prepare yourself here and you’ll get it!! Good Luck!!

hi ¡¡ i passed CCNA, thanks to 9tut pass the exam ¡¡¡, 10 February 2015. appear EIGRP 212, ACL1 and ACL2, failed some commands in the CLI as ?.. bye bye

Passed today ,3 questions drag and drop ,lab eigrp 221,acl1,acl2,thx 9 tut。

Exam today and passed, Lab is ACL, ACL2 + Mod3 for Host B, EIGRP With AS=222.
Thanks 9tut.

i just downloaded examtut and Watson dumps ist that enough to pass? can someone send me the latest version of the vce exam simulator. ..I can’t load my dumps because I have the older version of vce pls pls send to leratonokgipa@hotmail.co.uk

guys in ACL sim 1 question 3.. is the answer A correct?! anyone who has given the exam recently please help?

Hi there :)

I have started to prepare for CCNA certification.
Which version of VCE Simulator for Windows i should download to view these latest file for practising.
Pls guide me wht r d topics to be go through initialy to prepare for exam :)

Thanks in advance :)

Who passed exam today ? lab please ???

9tut is the Key point of sure success for CCNA :)

scored 1000/1000 today :) acl, acl2, eigrp 23
gl&hf

thanks 9tut
i cleared CCNA on 14th feb…
all que r from 9tut.

##3 pass –

finally i got cleared my exams i studied with dump exam material avaiable hear

t h e g h i b h a @ b l o g s p o t . c o m

I have my exam tomorrow. Any last minute advice? :)

Hi

I passed 11 Feburary 2015 watson and gillbeast is still valid . Lab questions Acl acl2 and eigrp similar . Thanks Allah then 9tut .

i got a actual dumps version of 19.0, is that a updated one. its consist of 316 questions..

THANK YOU 9TUT and THANKS GOD.

I passed today with 986, but I don’t know where I commit wrong.
I expected 1000 but im still happy.
on lab I just using TAB and other command like show ip eigrp neighbor.
Maybe that omits my score.

but Im satisfied. Thanks to ALL

Hi, where can I find a Avanset VCE latest player?
Can anyone send me please dkokoshi@hotmail.com.