CCNA Drag and Drop SIM Question
Question
You have been hired by Specialty Hardware Incorporated to document the layout of the network. Complete the following tasks: Complete the network topology shown in the graphic by dragging the labels below with the appropriate router types, interface types, and IP addresses to the graphic . Find the information you need by using the router console attached to the R-CENTER router.
Answer and explanation
Note: You can download this sim to practice here: http://www.9tut.com/download/9tut.com_CCNA_drag_and_drop_sim_question.pkt
This is the simplest lab question in four labs you see in the real CCNA exam. First we should identify the types of these routers by using the show cdp neighbors command:
There are 3 columns we should pay more attention to:
+ Local Interface: the interface on the device you are using “show cdp neighbors” command. In this case it is the interface of R-CENTER router
+ Platform: the platform of neighbor device
+ Port ID: the neighbor device’s port or interface on which the CDP packets are multicast
From the exhibit, the “Local Interface”, “Platform” and “Port ID” columns, we can identify where these four routers should be placed and their corresponding associated ports
Finally, use the show running-config command to find out the ip addresses of four interfaces on R-CENTER
And we can easily assign corresponding ip addresses to four neighbor routers, which are on the same network with R-CENTER router’s interfaces
Please remember in the real CCNA Exam the routers’ types, ip addresses and interfaces may be different! So make sure you understand how it works.
Other lab-sims on this site:
CCNA Configuration SIM Question (RIPv2 SIM)
thanks admin…
i can do it in sleep even
For determine the ip of neighbor routers, you can also use “sh cdp neighbors detail”
I also think it is a one-command lab: show cdp neighb detail
please ccna Questons and answers
i can do it in sleep even
thanks
hi all, will there deffently be this drag and drop in the ccna exam???
Thanks you Admin
hi, I downloaded the packet tracer file regarding this question. What is the password to get in to the router? I tried cisco, class, 9tut
pls help me, thanks
Sorry, guys, its okay, i don’t need to check other four routers, only the center one, it worked! no password is there! thanks dude.
The people who behind it, we should pay him something, this is not charge or service fees, i believe this is gift! Thanks again!
“I also think it is a one-command lab: show cdp neighb detail”
AL is right about this especially when it comes to finding out the ip address of the interfaces from the neighboring routers.
you are guessing it is x.x.x.2/24, it could be any other number.
Dear My CCNA paper on 22 jan
if any one found new question or lab then kindly update me
my
mail is
zulfiqarsoomro@yahoo.com
I Study 9tut and 356 Q ….
thanks
Hello All,
I m going to seat for the CCNA exam 640-802 end of this month.
Please send me the latest dump and Sim lab
my email ID: abdul.momin@nsn.com
momin97eee@yahoo.com
Thanks
Momin
Can any one help..me in getting 356 questions..sim of CCNA exam..
thanx
9tut and ACME
i pass today ccna 936
labs
VTP , ACL, Eigrp
zulfiqarsoomro@yahoo.com
i passed today with the score 923/1000 in bangalore .thanks to 9tut and test-inside dumps.same lab vtp,eigrp and ACL2.make sure u end each lab with copy running-config.
thanks very much 9tute and test-inside
pls am writing my ccna 640-802 on the 6th of feb. can anyone help me with the latest dumps email justopher@yahoo.com.i love u all.
Pls my exam ccna 640-802 is now on the 15th of feb.I need latest dumps. Thanks you all.
with this kind of drag and drop simulation, is it necessary to still save the configurations?
coming Soon……………….
we are waiting !!!!
really its so usefull 4 me. thank u so much dear
Im going to sit in CCNA 640-802 Exam at the end of this month . I need help regarding the simulation of EIGRP . if any of u have the simulation in packet tracer format kindly send me that on shahrukh.achakzai@hotmail.com . I will be grateful to u thanks
i would like to sit in ccna exam the ending of this month. please i need help regarding the simulation aspect as in what folder can i use to open d ccna packet tracer simulation questions.
Hello everyone i’m planning to take ccna exam on 22nd march i need the latest dumps can anyone send it please…………………………..my email id is jalpalnagaraju@yahoo.com
thanksssss……!
I am going to sit in ccna exam in April. I really appreciate if any one has sim lab (the latest one) to mail me @ qamar_m_s@yahoo.com. Thank you, I remain
This is very good question and i understand it very well…………..!
HI
I am going to seat for CCNA exam on the 3rd april
please send me a latest sim lab and latest dumps…………….!
Hello All,
I m going to seat for the CCNA exams at the end of this month.
Please send me the latest dump and Sim lab
my mail id:kunle_forever@yahoo.com
plz tell me how to download all packet tracer sims on this web..anybody having these similutations ,kindly mail me on mazharislam87@hotmail.com
Hello All,
I m going to take the CCNA exam 640-802 end of this month.
Please send me the latest dump and Sim lab
my email is r.moscrop765@btinternet.com
Hi,
Please could you send me the latest dump and Sim lab?
my email is morfeo1977@msn.com
thanx in advance.
please can u send me the latest CCNA dumps. Please help me clear my exam.
My email id is-aditya.nandwani05@yahoo.com
sorry its aditya.nandwani05@yahoo.com
hi i’m from egypt and i would like to know if the test inside 17.14 still valid or not.
I have to sit for it any time from now, plis can any one send me the latest ccna lab sims.
and can should help me plis there is this drag and drop issue i am some confused with, like the drag and drop for transport layer and netwk layer, dat is packet ,segment.routing,udp,windowing, i need some help ,most the be place in same order or can one placed them any hw just making sure they fall under the same right layer.
plia hw can i download the vtp lab sims.
Please, I need help. Kindly send me with the latest dump and sim lab. I have my exams in
2 weeks time. Thanks in advance.
This is my e-mail: olu_galaxy@rocketmail.com
pils can any one send me the latest sim for eigrp, access-list and vtp lab.
email id / nellcis_007@yahoo.com
Kindly send me latest lab sims. my email is
testking@saudia.com
Can you email me latest dumps and lab sims on kedar_955@yahoo.com
It will be really helpful.
thanks again for all the useful material on this website!!!!
I see most the .pkt files have answers .pkt files too. How do the answer files work?
Hi, my people all
am writting my ccna exam anytime from now and i need the latest dumps and simulations,
thanks in advance for the kind gesture
email: oriyomikb@yahoo.com
thanks for the useful material on the web
expecting reply
@amusa oriyomi kabiru :You can find dumps and sims at http://www.9tut.com/share-your-experience and http://www.9tut.com/ccna-faqs-a-tips
You can do it by using oune command show cdp neighbors detail
Hello All,
I m going to seat for the CCNA exams at the end of June.
Please send me the latest dump and Sim lab
my mail id:bootha123@yahoo.com
Hi, Every wonderful person out there, please can anyone send me the latest CCNA DUMP AND SIM LAB… my adress is eki54@yahoo.co.uk.
Thanks in advance
Can someone kindly send me the latest dumps for CCNA 802 exam to cts1234586@hotmail.com
Many Thanks
pls guys i want to write the exam next week, and i need a valid dumps, can someone help me with one?
mohd_kothari@yahoo.com
plz put latest link of ccna 640-802 so we can download it .