CCNA – Basic Questions 2
Here you will find answers to Basic Questions – Part 2
Question 1
What are some of the advantages of using a router to segment the network? (Choose two)
A. Filtering can occur based on Layer 3 information.
B. Broadcasts are eliminated.
C. Routers generally cost less than switches.
D. Broadcasts are not forwarded across the router.
E. Adding a router to the network decreases latency.
Answer: A D
Question 2
Which of the following statements describe the network shown in the graphic? (Choose two)
A. There are two broadcast domains in the network.
B. There are four broadcast domains in the network.
C. There are six broadcast domains in the network.
D. There are four collision domains in the network.
E. There are five collision domains in the network.
F. There are seven collision domains in the network.
Answer: A F
Explanation
Only router can break up broadcast domains so in the exhibit there are 2 broadcast domains: from e0 interface to the left is a broadcast domain and from e1 interface to the right is another broadcast domain -> A is correct.
Both router and switch can break up collision domains so there is only 1 collision domain on the left of the router (because hub doesn’t break up collision domain) and there are 6 collision domains on the right of the router (1 collision domain from e1 interface to the switch + 5 collision domains for 5 PCs in Production) -> F is correct.
Question 3
Refer to the exhibit. The two connected ports on the switch are not turning orange or green. What would be the most effective steps to troubleshoot this physical layer problem? (Choose three)
A. Ensure that the Ethernet encapsulations match on the interconnected router and switch ports.
B. Ensure that cables A and B are straight-through cables.
C. Ensure cable A is plugged into a trunk port.
D. Ensure the switch has power.
E. Reboot all of the devices.
F. Reseat all cables.
Answer: B D F
Explanation
The ports on the switch are not up indicating it is a layer 1 (physical) problem so we should check cable type, power and how they are plugged in.
Question 4
For what two purposes does the Ethernet protocol use physical addresses? (Choose two)
A. to uniquely identify devices at Layer 2
B. to allow communication with devices on a different network
C. to differentiate a Layer 2 frame from a Layer 3 packet
D. to establish a priority system to determine which device gets to transmit first
E. to allow communication between different devices on the same network
F. to allow detection of a remote device when its physical address is unknown
Answer: A E
Explanation
Physical addresses or MAC addresses are used to identify devices at layer 2 -> A is correct.
MAC addresses are only used to communicate on the same network. To communicate on different network we have to use Layer 3 addresses (IP addresses) -> B is not correct; E is correct.
Layer 2 frame and Layer 3 packet can be recognized via headers. Layer 3 packet also contains physical address -> C is not correct.
On Ethernet, each frame has the same priority to transmit by default -> D is not correct.
All devices need a physical address to identify itself. If not, they can not communicate -> F is not correct.
Question 5
Refer to the exhibit. Two buildings on the San Jose campus of a small company must be connected to use Ethernet with a bandwidth of at least 100 Mbps. The company is concerned about possible problems from voltage potential difference between the two buildings. Which media type should be used for the connection?
A. UTP cable
B. STP cable
C. Coaxial cable
D. Fiber optic cable
Answer: D
Explanation
Because the company has problem about voltage potential difference between the two buildings so they should connect via fiber optic cable which uses light pulses to transmit information instead of using electronic pulses.
Question 6
Which command can be used from a PC to verify the connectivity between host that connect through path?
A. tracert address
B. ping address
C. arp address
D. traceroute address
Answer: A
Explanation
To check the connectivity between a host and a destination (through some networks) we can use both “tracert” and “ping” commands. But the difference between these 2 commands is the “tracert” command can display a list of near-side router interfaces in the path between the source and the destination. Therefore the best answer in this case is A – tracert address.
Note: “traceroute” command has the same function of the “tracert” command but it is used on Cisco routers only, not on a PC.
Question 7
Refer to the exhibit. A network engineer is troubleshooting an internet connectivity problem on the computer. What causing the problem?
A. wrong DNS server
B. wrong default gateway
C. incorrect IP address
D. incorrect subnet mask
Answer: C
Explanation
The IP address of the PC (192.168.11.2/24) is not on the same network with its gateway 192.168.1.1 -> C is correct.
Question 8
How many broadcast domains are shown in the graphic assuming only the default vlan is configured on the switches?
A. one
B. six
C. twelve
D. two
Answer: A
Explanation
Only router can break up broadcast domains but in this exhibit no router is used so there is only 1 broadcast domain.
For your information, there are 7 collision domains in this exhibit (6 collision domains between hubs & switches + 1 collision between the two switches).
Question 9
Refer to the exhibit.
|
PC> tracert 10.16.176.23 1 31 ms 31 ms 32ms 172.16.182.1 Trace complete. |
Host A has tested connectivity to a remote network. What is the default gateway for host A?
A. 172.16.182.1
B. 192.168.1.1
C. 10.16.176.1
D. 192.168.1.6
Answer: A
Explanation
It will list all the routers (from nearest to farthest) it passes through until it reaches its destination so the first hop is its nearest IP. If we ping from a PC, it is also the default gateway for that PC -> A is correct.
Question 10
What functions do routers perform in a network? (Choose two)
A. packet switching
B. access layer security
C. path selection
D. VLAN membership assignment
E. bridging between LAN segments
F. microsegmentation of broadcast domains
Answer: A C
Can some please email me the latest Dumps to kmyllagm@hotmail.com ?
Thank you.
hi… i am planning to do the 640-822 exam tomorrow (21.03.2012), is there any latest dump you can provide to me?
If yes please send to my mail: mecerty@gmail.com
That pure white business card that looks sort of like a brillae font looks cool. This is the second time i’ve seen the Jessica Evans business card, but hey, it does really deserve to be featured since the design is really good. If you’re interested in more awesome business card designs, check out my blog!
I want to be a master in CCNA. So I practice hard, everyday I spend 4hours in a day with CCNA & 9tut helps me a lot with there questions. I preferred 9tut is a good educational site it questions & scenario helps me a lot. {debojitganguly2@gmail.com}
thanx 9tut, passed my ccna on march 13, sims were acl, eigrp and vlan……got zero on the acl and still came out with 854/1000….so i guess if u get most of the questions and at lest two of the sims, u can still pass bcause the minimum score is 825
I completed ccna with 986/1000 .I prepard exam only with the help of pass4sure v10 653 questions .Which was realy helpful .
Those who want contact me myjobs986@gmail.com
hey , can anyone send me the latest dumps for the CCNA exam?
my email id is deepmodi303@yahoo.com
Can some please email me the latest Dumps to ruifreiremachado@gmail.com ?
thx
can you send me dumps for ccna to moh_89@hotmail.com
thnx
Can some please email me the latest Dumps to akhilesh.sharma@hotmail.co.in ?
guys i really need ur hlp. i need to write my ccna exam vry soon i will really need d latest dorms. tnx….kindly send it to adebayosaheed@yahoo.com
Can some please email me the latest Dumps to shahzaibali18@yahoo.com
can someone send me the latest dumps? kirbym9271@hotmail.com
thanks in advance
Hello Guys I hope you will be fine there. I have CCNA (640-802) Vouchers on
special discount of 58% for World wide, with six months expiry date till you
purchase. Each voucher cost 60USD.
Details Required For CCNA Voucher For Discount Processing:
1-Full Name. 1st Name & Last Name (as you want to appear on certificate & documents)
2-Country.
3-City.
4-State.
5-Pin Code (or Area Code)
6-Residential Address (or where you can collect your Certificate or further correspondence
can be received)
Add me on Skype through this information which is written below:
Skype Name: rockon660
you can also email me at this email address which is written below:
madeelqaiser@gmail.com
If you have any Questions feel free to contact me.
I am also dealing the vocuhers of Microsoft.
Thanks,
Best regards,
Adeel
hey , can anyone send me the latest dumps for the CCNA exam?
my email id is alfre16_tolo@live.com.mx
please send me latest dumps at abumngal90@hotmail.com
plaese send me the latest dumps for ccna exam at abumngal90@hotmail.com
I have exam scheduled, two weeks count down. Can anyone email me latest CCNA Exam Dumps baxtera285@gmail.com
hey , can anyone send me the latest dumps for the CCNA exam?
my email id is shubhams2020@gmail.com.
thanks!
hey people…i was expected more of a discussion about the above Questions and Answers…if anyone cares ….Q3? FELT THE ANSWER IS A,B,F…as the switch displayed orange color at least this shows it was powered on ….
Passed today 947 all sims n dumps from 9tute and examcollection. all these are 100% valid. For the guys who are still having doubts my advise is dont worry as long as you have done 9tute labs and other MCQ’s. just go and do it. in the middle of the exam my PC started to shutdown which was really weird i was disturbed and however the institute managed to arrange another PC and reset the exam from UK. Anyway bottom line is dont get distracted take a deep breath and go through it. read every question carefully as the arrangements are changed in the real exam and the ip address as well. best of luck to all of you who are taking the exam and thanks to the all mighty god above all of us. and 9tute n examcollection. CCNP here i come !!!!!!!!!!!!!!!!!!!!!
I am looking for Visual CertExam (VCE) Manager to perform practice tests. My current VCE tells me that it is out of date when I try to open the latest dumps from Exam Collections.
Please assist with a link.
Thanks in Advance.
can some please send me the latest dump at charlesdatl@yahoo.com? Thanks!
my exam will be dated on 24th of April so i will be thankful if any one send my the last Dumps —- islam.mortagy@hotmail.com
i need the last dump can anyone send to me
islam.mortagy@hotmail.com
regarding question no. 8 on the basic questions 2…
What if there was more vlans besides the default vlan… would there be a broadcast domain per vlan?
@Anonymous..Q3 states in the question that it is a physical layer problem. You would want to troubleshoot your physical layer, Layer 1. Cables, Power, etc. Encapsulation is Layer 2 and above.
@Pol yes, each vlan is a broadcast domain
Hi , can anyone send me the latest dumps for the CCNA exam?
my email is docksito@gmail.com
Thanks a lot.
Q9 was on today’s exam
hi i am new on the field what is a dump please tell me ?
I still studied the literature, did sims till they were coming out of my ears and practice exams from ucertify and transcender before I came across 9tut. I’m not knocking it as the CCNA is bloody hard and I passed with a score of 78%. But seriously, dont rely on 9tut alone. Study the material guys! Even if it takes you 6 months, a year, 2 years, otherwise you’ll get found out when applying for a job. I work as a network analyst and the amount of guys i see in interviews who say they have a CCNA yet cant answer questions on STP or EIGRP is staggering. Do yourself and favour and work the material, your career will thank you!
Can anyone send me the LAtest dumps at gireeshdvb@gmail.com
@Diogo thanks a lot bro!
all dump that i download only give me 5 question but please anybody tell me how to have the entire questions? akimchocolat@yahoo.fr
Can someone please email me the latest Dumps to cristian.romedea@gmail.com
Can anyone send me the LAtest dumps at fmbuthia@gmail.com?Would really appreciate
Send me the latest dumps at my email. thanks talha_as@yahoo.com
Send me the latest dumps at my email, thank you. alaswadin@gmail.com
guys i really need ur hlp. i need to write my ccna exam vry soon i will really need d latest dorms
Thanks alot
jameel4khi@yahoo.com
guys can you send me the latest dump @ onealmacf@gmail.com thanks
If someone could send me the latest dumps for the ICND 1 test I would truly appreciate it. Lifedotexe@gmail.com
Can someone send me the latest 640-822 Dump ghjr.washington@gmail.com ICND1
Can someone send me the latest dump for the CCNA exam. Thanks a bunch! tothetop09@hotmail.com
I AM A STUDENT OF NRETWORKING STUDENT I WAS SEARCHING A SITE FOR INCREAMENT OF MY CCNA KNOLEDGE AND I GOT THIS SITE WHO IS TOO IMPROVING MY KNOWLEDGE
THANKS TO THIS SITE
Can someone send me the latest dump for the CCNA exam. Thanks a bunch!
solyman1988@gmail.com
Scheduling my CCNA exam this week and would really appreciate all the info needed to pass! Short notice on a job opportunity but requires CCNA so need to pass for my family! Thank you in advance~
Sorry, forgot to put my email! adoptskylar@yahoo.com Thanks again everyone!
Can some please email me the latest Dumps to rwafulla@gmail.com ?
Thank you.
Can someone please email me the latest CCNA Dumps to rwafulla@gmail.com ?
Thank you.