New CCNA – OSI & TCP/IP Model
Note: If you are not sure about OSI Model, please read our OSI Model tutorial.
Question 1
Where does routing occur within the DoD TCP/IP reference model?
A. application
B. internet
C. network
D. transport
Answer: B
Explanation
The picture below shows the comparison between TCP/IP model & OSI model. Notice that the Internet Layer of TCP/IP is equivalent to the Network Layer which is responsible for routing decision.
Question 2
Refer to exhibit.
| Router#show running-config Building configuration… Current configuration : 659 bytes ! version 12.4 no service timestamps log datetime msec no service timestamps debug datetime msec service password-encryption ! hostname Router ! enable secret 5 $1$mERr$hx5rVt7rPNoS4wqbXKX7m0 ! interface FastEthernet0/0 ip address 192.168.1.1 255.255.255.0 ip access-group 101 in duplex auto speed auto ! access-1ist 101 deny tcp any any eq 22 access-1ist 101 permit ip any any ! line con 0 password 7 0822455D0A16 login line vty 0 4 login line vty 5 14 login ! end |
A network administrator cannot establish a Telnet session with the indicated router. What is the cause of this failure?
A. A Level 5 password is not set.
B. An ACL is blocking Telnet access.
C. The vty password is missing.
D. The console password is missing.
Answer: C
Question 3
Before installing a new, upgraded version of the IOS, what should be checked on the router, and which command should be used to gather this information? (Choose two)
A. the amount of available ROM
B. the amount of available flash and RAM memory
C. the version of the bootstrap software present on the router
D. show version
E. show processes
F. show running-config
Answer: B D
Explanation
When upgrading new version of the IOS we need to copy the IOS to the Flash so first we have to check if the Flash has enough memory or not. Also running the new IOS may require more RAM than the older one so we should check the available RAM too. We can check both with the “show version” command.
Question 4
Refer to the exhibit. An administrator pings the default gateway at 10.10.10.1 and sees the output as shown. At which OSI layer is the problem?
| C:\> ping 10.10.10.1 Pinging 10.10.10.1 with 32 bytes of data: Request timed out. Request timed out. Request timed out. Request timed out. Ping statistics for 10.10.10.1: Packets: sent – 4, Received = 0, Lost – 4 (100% loss) |
A. data link layer
B. application layer
C. access layer
D. session layer
E. network layer
Answer: E
Explanation
The Network layer is responsible for network addressing and routing through the internetwork. So a ping fails, you may have an issue with the Network layer (although lower layers like Data Link & Physical may cause the problem).
Question 5
At which layer of the OSI model does PPP perform?
A. Layer 2
B. Layer 3
C. Layer 4
D. Layer 5
Answer: A
Question 6
Which of the following correctly describe steps in the OSI data encapsulation process? (Choose two)
A. The transport layer divides a data stream into segments and may add reliability and flow control information.
B. The data link layer adds physical source and destination addresses and an FCS to the segment.
C. Packets are created when the network layer encapsulates a frame with source and destination host addresses and protocol-related control information.
D. Packets are created when the network layer adds Layer 3 addresses and control information to a segment.
E. The presentation layer translates bits into voltages for transmission across the physical link.
Answer: A D
Explanation
The transport layer segments data into smaller pieces for transport. Each segment is assigned a sequence number, so that the receiving device can reassemble the data on arrival.
The transport layer also use flow control to maximize the transfer rate while minimizing the requirements to retransmit. For example, in TCP, basic flow control is implemented by acknowledgment by the receiver of the receipt of data; the sender waits for this acknowledgment before sending the next part.
-> A is correct.
The data link layer adds physical source and destination addresses and an Frame Check Sequence (FCS) to the packet (on Layer 3), not segment (on Layer 4) -> B is not correct.
Packets are created when network layer encapsulates a segment (not frame) with source and destination host addresses and protocol-related control information. Notice that the network layer encapsulates messages received from higher layers by placing them into datagrams (also called packets) with a network layer header -> C is not correct.
The Network layer (Layer 3) has two key responsibilities. First, this layer controls the logical addressing of devices. Second, the network layer determines the best path to a particular destination network, and routes the data appropriately.
-> D is correct.
The Physical layer (presentation layer) translates bits into voltages for transmission across the physical link -> E is not correct.
Question 7
A network administrator is verifying the configuration of a newly installed host by establishing an FTP connection to a remote server. What is the highest layer of the protocol stack that the network administrator is using for this operation?
A. application
B. presentation
C. session
D. transport
E. internet
F. data link
Answer: A
Explanation
FTP belongs to Application layer and it is also the highest layer of the OSI model.
Question 8
At which layer of the OSI model is RSTP used to prevent loops?
A. data link
B. network
C. physical
D. transport
Answer: A
Question 9
Which layer in the OSI reference model is responsible for determining the availability of the receiving program and checking to see if enough resources exist for that communication?
A. transport
B. network
C. presentation
D. session
E. application
Answer: E
Question 10
A receiving host computes the checksum on a frame and determines that the frame is damaged. The frame is then discarded. At which OSI layer did this happen?
A. session
B. network
C. physical
D. data link
E. transport
Answer: D
Explanation
When using the term “frame” we can easily recognize it belongs to the Data Link layer. In this layer, an Frame Check Sequence (FCS) field is added to the frame to verify that the frame data is received correctly.
Can I also get the latest dump? I am planning to take the test in late April.
Shanilaahmed09@gmail.com
Thanks
Hi Team,
Please send me latest dump or vce file to opeopnomi916@gmail.com
thanks a lot !
I mean opeopenomi916@gmail.com thanks a lot !
Hello. can anyone send me the latest dump on ccna. my exams is on tuesday 8 Apr.
My email is : ashvin.007@hotmail.com
what are ccna dumps ?
Hi,
Im planning to take my ccna exam next week. Will anyone please send me the latest dumps? my email is sallyspace2@gmail.com thanks a million. Please help me.
Q2 Explanation: Try it out in Packet Tracer and see that, even with a password, the inbound ACL doesn’t stop the Telnet session. But a missing password does. Therefore, ACLs must only work on packets which are being routed, not packets destined for the router itself.
Can anyone please send latest dumps at smile4ever65@yahoo.com. Thanks a lot.
will someone send me the last dumps too, please?
bennyeagels@web.de
kind regards
Can anyone please send the latest dumps for 200-120 exam at amitjanabrain@gmail.com
Can we use ” ? ” while doing NAT/Acl/Eigrp LABS in the EXAM ????
Hey all – would someone be so kind as to send me the latest dumps? hitcttd@gmail.com
I’m renewing, had the 802 one before so dumps should do me just fine.
Thanks guys!
Can someone please send me the latest CCNA dumps at smile4ever65@yahoo.com. Really appreciate your help. Thank you.
Can someone please send me the lastest dumps to Socrates0b11@gmail.com; Please and Thank you!
@Warren: Try it on GNS3 and you’ll see inbound ACL on router denying Telnet session coming from the PC. I tested it on both IOS 12.4 and 15.2, it works the same.
Try it on GNS3 and you’ll see inbound ACL on router denying Telnet session coming from the PC. I tested it on both IOS 12.4 and 15.2, it works the same.
Please send me latest Dumps at akashsharma1134@gmail.com
hello everyone where i can find a book 200-120
hey please fiends send me latest dumps at hornella.ngongo@gmail.com
Hi Guys, exam on Monday…freaking out, please send on the latest dumps to em-1985@outlook.com cheers!!
can someone send to me the latest dumps at abuumkuda@yahoo.com; plz
Hi please can anyone send me the latest CCNA dumps to this email id : balupavanster@gmail.com
nice n good for exam …………….but it not covered hole session plz send ccna dumps to my e id :toyajoshi49@gmail.com
Q2 further explanation: Remember all, you can have many ACL’s that would block a port or IP address however because no ACL was applied with the access-class command on the line vty, there would be no difference having them in the config or not. The answer therefore had to be the missing password.
Can anyone please send the latest dumps for 200-120 exam at : tawin_7@hotmail.com
Can anyone please send the latest dumps plzzzzz
nika.matiashvili@gmail.com
Latest dumps please mainehainey@gmail.com
get VCE Player new version just for 1$ email me if you want copy abidlatki9@gmail.com
i need latest dumps can u help me plzzzzzzzzzzzzzzz nomanqasim4366@gmail.com
can someone send me the latest dumps for this exam? boni2_2000@yahoo.com
hI everyone ,
dears I need help please in ICND 1 exam (Switching and Routing)
1. My VCE is not working. I need a new one.
2.I need latest dumps.
please who can help me by send them on (s.mohd.bq@gmail.com)
can any one send me the lastest dumps and VCE software at haroon.talha@gmail.com..thankul to you
pls i have exam at 19 may i want latest dump and vce if any one have send at (methaq_kh@yahoo.com) and thanks
dear all
contact for
CCNA
CCNA SECURITY
CCNP
guides online training updated valid dumps & discounted vouchers for exams.
skype:certcry
Is there any kind of change in exam or any new question? Can we use “TAB” & “?” in exam?
Please let me know.I am planning for next week.
pls can somebody send me the lastest dumps and VCE software at i1x2n1@gmail.com and thanks
Q3 and 10 were in today exam
@9tut – you are a real super hero..a real super man.
I think i should call you AMAZING 9TUT-MAN
Thank you so much for all your assist.
I got 986/1000.
All questions were from 9tut.
There were few new questions..some one has already discussed here earlier.
sim were ACL,ACL2(with 3rd modification and host was “B” instead of “C”.wrong IP address was configured on interface which was connected to ISP.I tried to remove that, but command “no ip address 192.168.18.2 255.255.255.0 was not working.strange !! just “NO IP ADDRESS ” resolved that problem ) & EIGRP with AS 12 and passive interface on ISP interface,main router was advertising one extra network which was not in topology.Remove that one.
New questions were :
authentication type of SNMPV2
Benefit of multi-area in ospf
Ether-channel – out put was given & que was “which configuration is required to get this out put.? you will found mode- “passive” and channel-group no. with this you can select correct option.
DUMPS are very helpfull,please practice all dumps.ALL QUESTIONS ARE FROM THESE DUMPS
I FOLLOWED-
Cisco.Passguide.200-120.v2013-12-30.by.Matthew.319q.vce
Cisco.Actualtests.200-120.CCNA.v2013-10-01.by.examtut.278q.vce
Cisco.Actualtests.200-120.v2013-12-10.by.Watson.314q.vce
these all are available on examcollection.com
9tut gives a big help.practice here daily.
All the best friends !!
@9tut, nice job done here..
Can anyone please send me the latest CCNA dump, i’m writing the test in July.
Thanks. kingsley.risky@gmail.com
Can anyone please send me the latest CCNA dump, i’m writing the test in July.
Thanks. islam_tal3at@hotmail.com
Yow! Please send me the latest CCNA Dumps! Gonna take the CCNA exam this coming JULY. Thank you so much! general.padre@yahoo.com
Please, can anybody send me the latest CCNA dumps to eljneed76@gmail.com
Thanks.
Can someone send me the latest dumps to marcus.chaney3@gmaill.com I just downloaded the VCE software for MAC and now I’m ready to study!
Can someone send me the latest dumps? i am scheduled to write my exam in 12 days. thanks.
aten.cubiq@hotmail.com
Pls send dumps to mhkhan.in4u@gmail.com
Can someone send me the latest dumps? I am taking exam 6/30.
Thanks so much
aepate93@gmail.com
Can someone please send me the latest dumps? I am taking exam.cedominion@yahoo.com
can someone send me the latest dumps @ tgj_redbone@yahoo.com
Q7 in the exam today.
Can any one send NAT notes to this mail: rambabuk424@gmail.com