New CCNA – OSI & TCP/IP Model
Note: If you are not sure about OSI Model, please read our OSI Model tutorial.
Question 1
Where does routing occur within the DoD TCP/IP reference model?
A. application
B. internet
C. network
D. transport
Answer: B
Explanation
The picture below shows the comparison between TCP/IP model & OSI model. Notice that the Internet Layer of TCP/IP is equivalent to the Network Layer which is responsible for routing decision.
Question 2
Refer to exhibit.
| Router#show running-config Building configuration… Current configuration : 659 bytes ! version 12.4 no service timestamps log datetime msec no service timestamps debug datetime msec service password-encryption ! hostname Router ! enable secret 5 $1$mERr$hx5rVt7rPNoS4wqbXKX7m0 ! interface FastEthernet0/0 ip address 192.168.1.1 255.255.255.0 ip access-group 101 in duplex auto speed auto ! access-1ist 101 deny tcp any any eq 22 access-1ist 101 permit ip any any ! line con 0 password 7 0822455D0A16 login line vty 0 4 login line vty 5 14 login ! end |
A network administrator cannot establish a Telnet session with the indicated router. What is the cause of this failure?
A. A Level 5 password is not set.
B. An ACL is blocking Telnet access.
C. The vty password is missing.
D. The console password is missing.
Answer: C
Question 3
Before installing a new, upgraded version of the IOS, what should be checked on the router, and which command should be used to gather this information? (Choose two)
A. the amount of available ROM
B. the amount of available flash and RAM memory
C. the version of the bootstrap software present on the router
D. show version
E. show processes
F. show running-config
Answer: B D
Explanation
When upgrading new version of the IOS we need to copy the IOS to the Flash so first we have to check if the Flash has enough memory or not. Also running the new IOS may require more RAM than the older one so we should check the available RAM too. We can check both with the “show version” command.
Question 4
Refer to the exhibit. An administrator pings the default gateway at 10.10.10.1 and sees the output as shown. At which OSI layer is the problem?
| C:\> ping 10.10.10.1 Pinging 10.10.10.1 with 32 bytes of data: Request timed out. Request timed out. Request timed out. Request timed out. Ping statistics for 10.10.10.1: Packets: sent – 4, Received = 0, Lost – 4 (100% loss) |
A. data link layer
B. application layer
C. access layer
D. session layer
E. network layer
Answer: E
Explanation
The Network layer is responsible for network addressing and routing through the internetwork. So a ping fails, you may have an issue with the Network layer (although lower layers like Data Link & Physical may cause the problem).
Question 5
At which layer of the OSI model does PPP perform?
A. Layer 2
B. Layer 3
C. Layer 4
D. Layer 5
Answer: A
Question 6
Which of the following correctly describe steps in the OSI data encapsulation process? (Choose two)
A. The transport layer divides a data stream into segments and may add reliability and flow control information.
B. The data link layer adds physical source and destination addresses and an FCS to the segment.
C. Packets are created when the network layer encapsulates a frame with source and destination host addresses and protocol-related control information.
D. Packets are created when the network layer adds Layer 3 addresses and control information to a segment.
E. The presentation layer translates bits into voltages for transmission across the physical link.
Answer: A D
Explanation
The transport layer segments data into smaller pieces for transport. Each segment is assigned a sequence number, so that the receiving device can reassemble the data on arrival.
The transport layer also use flow control to maximize the transfer rate while minimizing the requirements to retransmit. For example, in TCP, basic flow control is implemented by acknowledgment by the receiver of the receipt of data; the sender waits for this acknowledgment before sending the next part.
-> A is correct.
The data link layer adds physical source and destination addresses and an Frame Check Sequence (FCS) to the packet (on Layer 3), not segment (on Layer 4) -> B is not correct.
Packets are created when network layer encapsulates a segment (not frame) with source and destination host addresses and protocol-related control information. Notice that the network layer encapsulates messages received from higher layers by placing them into datagrams (also called packets) with a network layer header -> C is not correct.
The Network layer (Layer 3) has two key responsibilities. First, this layer controls the logical addressing of devices. Second, the network layer determines the best path to a particular destination network, and routes the data appropriately.
-> D is correct.
The Physical layer (presentation layer) translates bits into voltages for transmission across the physical link -> E is not correct.
Question 7
A network administrator is verifying the configuration of a newly installed host by establishing an FTP connection to a remote server. What is the highest layer of the protocol stack that the network administrator is using for this operation?
A. application
B. presentation
C. session
D. transport
E. internet
F. data link
Answer: A
Explanation
FTP belongs to Application layer and it is also the highest layer of the OSI model.
Question 8
At which layer of the OSI model is RSTP used to prevent loops?
A. data link
B. network
C. physical
D. transport
Answer: A
Question 9
Which layer in the OSI reference model is responsible for determining the availability of the receiving program and checking to see if enough resources exist for that communication?
A. transport
B. network
C. presentation
D. session
E. application
Answer: E
Question 10
A receiving host computes the checksum on a frame and determines that the frame is damaged. The frame is then discarded. At which OSI layer did this happen?
A. session
B. network
C. physical
D. data link
E. transport
Answer: D
Explanation
When using the term “frame” we can easily recognize it belongs to the Data Link layer. In this layer, an Frame Check Sequence (FCS) field is added to the frame to verify that the frame data is received correctly.
hi there
please send the ccna 200-120 study material and dump to
jinglepuppu@hotmail.com
thanks so much
Can anyone please mail (shravan4488@gmail.com) me the latest dumps in pdf format?
I’m not able to find the download link for pdf format dumps, please help me.
Q9?????
please can someone send the ccna 200-120 study material and dump to damyepata@hotmail.com
please help.
Q5&7 were in the today exam
Q5,2 & 9 were in exam today
hi, I have schedule my CCNA exam on monday 14. could you send me dump?
supercedro@hotmail.com
Thanks OXOXOXOXOX
I have to pass this test. Can anyone please send latest dumps and VCE please…Thanks
Lward602@yahoo.com
hi pls help ccna dumps.
Q 3 – 4- 5 – 8 in my exam yesterday
Question 2 and 8 where in the exam recently
hI
please send the ccna 200-120 study material and dump to
abebe.melaranperf@gmail.com
thank you in advance
thanq… its useful for my xam….
Can someone please send me the latest dump question at wingkase@outlook.com
Can some one send me the latest dumps in pdf to ( amaro.macedo@outlook.com)
Thanks in advnc.
Hey Guyz,
please send me the CCNA 200-120 study material and dump to
rdhana838@gmail.com
Thank you in advance
Can anyone please mail (sylvain.kssi@gmail.com) me the latest dumps in pdf format?
I’m not able to find the download link for pdf format dumps, please help me.
Hi! Thanks for the answers. Passed 1000/1000 ICND1
Can someone send me latest CCNA or ICND2 dumps to
skummy@web.de
Thanks!!
pls send latest ccna dumps
ramardce2829@gmail.com
Hi!
i passed my exam last Saturday thanks 9tut and Pass4sur………and good luck to everyone
hi!!
can you send me the last dumps question and exam pratrice to djokoaurore@gmail.com
Thanks
Passed Marks: 975, 99.8% from 9tut no need to exert effort for latest dumps. Labs EIGRP, ACL Sim 1 & 2, practice all modifications coz it was given on random. 9tut is enough to pass the exam. GoodLuck. .
Hi dear Friends,
can you send me the last dumps question and exam pratrice to echazar@aol.com
please can someone send the ccna 200-120 study material and dump to tanachai04@hotmail.com
please help.
I’d have thought the right answer for Q9 is Session and not Application
Nope! I’m wrong. That’s elementary enough.
has anyone heard about changing the exam next month???Is that true??please tell me because I intend to take the exam next week…
heey there
can someone please advice me where to get the ccna data center dumps
or send it to me in AERAYAH@GMAIL.COM
Does anyone here got the study materials and latest dumps yet? I want to study again CCNA and take cert. Please if anyone can share send it to my mail. luis_lights@yahoo.com
Appreciate your help folks.
pls send latest ccna dumps (mj8mj4@hotmail.com )
In 7 days , i am going to attend this exam. Kindly send me the dump file at sunshine062011@gmail.com
Dear All
Regarding all CISCO exams CCNA CCNA Security CCNP (Route Switch Tshoot) updated valid dumps & Exam discount vouchers available globally.
1. CCNA 200-120 60 % discounted vouchers
2. CCNP (Route Switch TShoot) 25 % discounted Vouchers
3. CCNA Security 640-554 60 % discounted Vouchers
Ask any kind of technical and exam related questions from our CCIE experts.
Feel Free to Contact
Email Contact:dheprofessionals@gmail.com
Skype Id:net.rideplay
Thanks
Best Regard
Admin
can any one send me the last dumps question and exam please help me i have to exam this weak
Q3 & Q10 in 5th Sep 2014 exam
salam alikoum rani what about the sim’s please ???
Passed CCNA on 5th September with 986. ACL1, ACL2(MOD.3) and Eigrp labs. All the question were from 9tut and Watson, thanks 9tut. Keep up the good work you are doing by providing study material.
Q1, 2 and 5 were in exam
can any one send me the watson’s dump please ?????
Can any one send me new ccna 200-120 exam questions please?….Next week is my exam….
arunsobila@gmail.com
Dear All
Regarding all CISCO exams CCNA CCNA Security CCNP (Route Switch Tshoot) updated valid dumps & Exam discount vouchers available globally.
1. CCNA 200-120 60 % discounted vouchers
2. CCNP (Route Switch TShoot) 25 % discounted Vouchers
3. CCNA Security 640-554 60 % discounted Vouchers
Ask any kind of technical and exam related questions from our CCIE experts.
Feel Free to Contact
Email Contact:dheprofessionals@gmail.com
Skype Id:net.rideplay
Thanks
Best Regard
Admins
Passed today with 958
Q7 was on test
thanx 9tut
PASS MY EXAM TODAY SEPT 17 1000/1000
Q2, Q5, Q9 in exam today
Some one send me latest dumps on
Carlosboyone@yahoo.co.uk
please send me ccna dumps.
mangesh1525@gmail.com
can you please the the latest dumps to my email? bruceachilles02@gmail.com
Thank you very very much; I hope we all pass!
can anyone send me the latest ccna dumps and vce file pls? sultansyedibrahim@hotmail.com
Thank you in advance
Dear All
Regarding all CISCO exams CCNA CCNA Security CCNP (Route Switch Tshoot) updated valid dumps & Exam discount vouchers available globally.
1. CCNA 200-120 60 % discounted vouchers
2. CCNP (Route Switch TShoot) 25 % discounted Vouchers
3. CCNA Security 640-554 60 % discounted Vouchers
Ask any kind of technical and exam related questions from our CCIE experts.
Feel Free to Contact
Email Contact:dheprofessionals@gmail.com
Skype Id:net.rideplay
Thanks
Best Regard
Admins
Can somebody please please explain why Q9′s answer is ‘Application layer’??? I thought it would be Transportation layer with 3way handshake that determines the availability of the other side? I looked at all the tutorials for application layer and can’t find anything that would indicate the given answer. Where am I going wrong? :/
Hi
Thanks for all the posting help a lot.
please anyone can u help and send the latest dumps for ccna 200-120 to my email :
Crypterdk@gmail.com
Please.
Question #5, #7 on my exam last Sunday, 2014/10/5.
Thanks a lot 9tut. Almost all questions were from here except for two.
Had the EIGRP and ACL 1 sims.
HI
i need the latest dumps ,today is 10/8/2014 .and send to me the lATESH dums.tnx for