Share your (new) CCNA Experience

hey guys,

I need some help please !

Does any one know where i can found a good dump for CCNA DATA CENTER.

I all ready have CCNA and CCNP R&S

Hichaminho2@hotmail.com

Are there any new questions in the exam ?

@Catherine no! Passed today acl 1, acl 2 and Eigrp sim. All questions are present on this site but a few are answered wrong so recheck everything with your study materials if your not sure. No new sims that were reported last few days. The exam was relatively easy but prepare your stuff properly I studied for a year for this and have a broad understanding of all topics, concepts and practical appliance. Tab and ? work in the sim environment.

Much appreciated to 9tut crew who provided so much resources for practice. Good luck all in your journey!

@Mosca which questions are wrong in this website ?

I bumped on only a few 4-5-6 in total can’t really remember, as there are more then 300 in total from the top of my head, but there is one on the switch terminal vty line where it asks to select a option to only allow one connection and the wrong answer is selected. There is also a suspect one on frame-relay regrading the encapsulation according to my materials(ccna curriculum) and testing. Its really not a massive difference and will virtually make no difference on exam since 99% is correct and the labs are spot on and I never got the suspect questions on my exam.

But dont go and remember everything its good to check things out and understand why things are answered the way there are. If your in a rush this site is gold. For a premium fee of 10$ you can really drill things to perfection with 9tut quizzes. Regards and good luck on your exam.

Passed today with 986 score! lab Acl 1, acl 2 mod 3, eigrp 222. thx 9tut!!

were there any ospf and eigrp simlets as others are talking ?

Thanks 9tut ,passed yesterday 945 score ,lab acl1 ,acl2 ,eigrp .. no adjacense question

Dose anyone know side related to Service provider 640-875 exam?

Passed tody. Thank 9tut…!

For those of you who passed CCNA, an advice from my best teacher ever “Keith Barker”.

♦♦After CCNA♦♦
https://www.youtube.com/watch?v=sjhBJ_AIjOU

♦♦When I first started CCNA a year a go I found this video♦♦
https://www.youtube.com/watch?v=3UwvOsfJMY8

♥♥♥…I Love networking…♥♥♥

Passed today. 9tut, you are the man!!

any one needs dumps send us a working gmail id with password
game.rose@hotmail.com

Pass CCNA today 15-10-2014
All questions are from 9tut & Waston Dump.
Lab was ACL1, ACL2 & EIGRP simlet.
Thanks 9tut & all those who shared their experience.

@olilor by simlet you mean show commands or youhave to solve them type of labs

Passed the exam today. 9tut was very helpful. Acl1, Acl2 modification3, EIGRP. Goodluck to all who will take the 200-120 exam. Just keep pushing you will do it.

@catherine…Eigrp simlet…have to troubleshoot it by configuring d AS number to match d whole routers and also add the missing network so that it will form adjacency.

Hey Guys cleared CCNA today with 931. Pretty much the same from the dumps and 9tut. I got access-list, acl2, and eigrp.

the etherchannel question is

A network administrator creates a layer 3 EtherChannel, bundling four interfaces into channel group 1. On what interface is the IP address configured?
A. the port-channel 1 interface
B. the highest number member interface C. all member interfaces
D. the lowest number member interface

Answer A

Pass CCNA today 15-10-2014

51 questions, labs eigrp, ACL1, ACL2-mod 3, all questions of 9tut, only one new of etherchannel but very easy answear.

Hi. I will be taking CCNA 200-120 next week. Can someone send me a good dump? It will be highly appreciated. Thank you. jasononcisco@gmail.com

And btw, this forum is awesome. Everybody seems to be very professional and polite. Will contribute also to this forum soon. Good luck to everyone in your ventures.

Passed today with 986 :)
Same as others- eigrp, ACL1 and ACL2-mod 3 labs and 51 questions. Because I had spent so much time on this site, I was flying through the test so fast and half way through really started to waste time, to not appear suspiciously fast. I still finished under an hour even with all the dragging. At the end of the test it says this is the preliminary score and your results will be evaluated for authentication and checked for consistency and you can check online within 72 hours if your exam is considered valid or you might have to take it again. This has me worried now, maybe I did it too fast, like too good to be true? Has anyone had points deducted or had to retake exam for some reason? How long to we have to wait to know for sure? Some say online 10 days???

Passed the exam today…..976/1000
Guys sincerely this is the right place to face CCNA Exams…any query related to exam just mail it 2 me…
e-mail ajuaju14@gmail.com
Phone 8882666763
time for some donation…

I have downloaded the above .pkt file for practice , when i enter show running-config command it doesn’t show me the details of ips,Eigpr details other commands are working , can any body help ?

@jesseca .. do not worry, u will pass officially .. all who studied from 9tut or studied watson are passing in less than an hour .. and they all passed officially after the 72 hours .. i even know someone who did it in 20 min :D so,do not worry at all however do not do this in ccnp or ccie u know what i mean ;D
they will send u emails shows everything in a very clear steps just wait two more days .. again do not worry and just have fun through these two days ;D .. goodluck

@Anonymous. when did you write?

passed!!! 972

there is a new question on etherchannel

thank you 9tut and watson, these are legit!!

can any one give me the latest dumps ??

plz mail me>>forhadmozumder06@gmail.com

@Jessica, I know what you mean. I slowed down to make sure that I took a little over an hour and I didn’t get my exam flagged with that scary message about having to wait 72 hours. Cisco and Pearson are not stupid…

I passed today CCNA exam 945. Thanks to 9tut.

Passed today CCNA exam with 945.Thanks a lot to 9 tut.
Such practice all questions perfectly ,that is enough to clear exam.EIGRP,Acl1,Acl2, sim.All the best ……….

I passed CCNA (200-120) exam today & got 1000 marks… ACL1, ACL2 mod 3, and EIGRP sims… thanks to 9tut…

I passed CCNA (200-120) exam today & got 1000 marks… ACL1, ACL2 mod 3, and EIGRP sims… thanks to 9tut…

hello kindly share the link Acl mod 3 link?? help me

IMPORTANT QUESTION!!!

On ACL2, mod3 and mod4, 9tut suggests: but in the exam you should use “access-list 100 permit ip any any”

So, in real exam, should we type “permit ip any any” instead of the correct command “permit ip any host 172.22.242.17″ to get full mark?

Thanks guys :) I got the e-mail that says Congratulations, you passed bla-bla, but it doesn’t mention the point score anywhere so I assume it remained the same.
@atut, I used “permit ip any any” and got maximum points for sim so go for it. I assume it might be a trick question in a sense that you can use only max 3 commands and if you don’t say “any any” then implicit deny will not allow any other type of access (there are 3 servers not 2 so they wouldn’t be able to access the dns server)… not sure, just my 2 cents :/

i done with ma exam on 15th of this month and got 890 marks .. thanks a ton 9 tut.. :)

Friends please help…can any one send me dumps.My exam is next week.
engr.zeshanzeb@gmail.com

just pass my test

927 9tut works if you work it …

Guys i’m using how2pass.com my exam is next week. is this legit? i find it interesting

@ Mr g… which skills&hotspots did u solve in exam ??

I’m using watson and gillbeast dumps? are these good ones? and reviewing sims also here at 9tut, I’m about to take my exam 2 weeks from now, if you could help me in anyway possible please do not hesitate to keep in touch boysweetpotato@gmail.com, or leave a message in this thread i would be forever grateful thanks!

practice question on:
http://www.ciscovce.com

i have just passed CCNA with 917/1000,3 hours ago, thanks to the one and only Allah , the sims were :
ACL 1 , ACL2 , EIGRP & EIGRP + 48 Questions , No Drag and Drop Questions were in the exam.
A.My approach for the exam :
1. Study the theory behind every concept , then after you understand the concepts try to configure after you feel comfortable with the configuration start troubleshooting (don’t worry i will tell you how to study for that)
2. after you have understood all the concepts and you can configure and troubleshoot , now it’s time to enter 9tut and test your knowledge and start practicing for speed ( speed kills, it really does , if you are not fast enough then you will not make it, how would you become fast ? practice makes improvement, so start practicing )
B. Materials :
1. CBT Nuggets ICND1 + ICND2 (Both combined will take you from the basics to the Associate Level) or INE Training CCNA Series.
2. After you have finished Studying and you feel comfortable with all the topics, now it’s time to Enter 9tut and get to work .
3. Study Lab :
-you can Either use The recommended Lab in the CBT Nuggets CCNA Series and work with real Equipment .
can’t afford real Equipment ? no problem , you can still use a Simulator , i would recommend Cisco Packet tracer (you can have it if you know a friend who studies at The Cisco Academy ,if not you can find it if you look hard enough [not that hard to find ;) ])
, if you need any help you may contact me on Mohmmedbugazia@gmail.com
i wish you the best of luck, Peace!

got 986…ACL 1&2, Eigrp…no new question

Anyone seen any OSPFv3 questions / sims on the 200-120 exams? Specifically, any involving OSPF configurations using IPv6?

Thank you 9tut… passed 200-120 on Friday with a 945. Sent you $25 there for gratitude towards such a great (free) resource.

Shout out to Watson/Examtut vce’s. ACL 2 and EIGRP sims among……
2 questions and 1 sim I hadn’t seen before.
New SIM was a 3-part question pop out with 4 MCQ’s about what would need to be applied for telnet to be still disabled but ping be allowed (for example)
A. ACCL 104 acl was removed and 106 put in in its place on fa /01.
B. ACL 108 is applied to fa 0/1….. etc

The questions was a 33% – step 1 66% – step 2 and 100% “finished” dial on the lest. Hadn’t seen anything like it before.
You could view all the access list statements by doing a sh run….

Best of luck friends….

@ROD: Thank you very much for your contribution. Maybe you saw the ACL1 sim about telnet which was posted here: http://www.9tut.com/70-ccna-access-list-sim

Today i have exam, i will write after

Hi Everyone,

What about the New SIM 3-part of ROD’s Comment ?

I think , ACL in URL as 9tut Comment .

Thank you very much.