Share your (new) CCNA Experience

The new sims are here: http://www.9tut.net, look for eigrp & ospf neighbor sim.

Clear CCNA 1000/1000 seriously I can’t believe I did that.
Thank you so much 9tut. Almost 90% questions was from here exactly same. I had sim EIGRP, ACL 2 plus that EIGRP sim jam is talking about on top and OSPF Neighbor Sim from here.
Try doing all composite questions here plus quiz for each topic make sure keep doing it until u get 100% score.
I also tried some cart exam sim. But most question on exam was from here.
Thanks everyone sharing their experience here .Good job 9tut.

Please.. I will be writing my exam on 15th Oct…I need advice. How many questions in total and which topic do they ask more.
Thanks.

please send me the latest dumps @ ahmadssp@gmail.com

Passed exam Sept 22nd Score 903
Thanks 9tut!!!!!!!!!!!!!!!! All info to pass is right here at 9tut. Review review review
I was warned about time and panicked so I rushed doing the ACL sim and did not apply the access-list to the interface. I ended up with 39 minutes remaining when I completed the exam. Don’t rush!!! EIGRP Sim and ACL Sim

Alhamdulillah…. I passed yesterday 956 / 1000…. thanks 9tut…..

I want know about the new qu~

first : the new siml ( ospf – eigrp ) trubelshooting only? I mean only I need show ~ and I chose or write command like eigrp modf~3

second : only the new q in sim or anther like drop~ swit~ ip routing

plz answer to me because I will take the exam tomorrow any one can help me to pass i study

.Watson.314q
Matthew.319q
9tut siml

that’s good or i need study anther something

Anyone can share with me latest dump 200-120 exam? Please email me isaac.zain@gmail.com

Please, which topic do they ask most. Please my exam is 15th october, 2014. I need reply.
thanks..

Pls i nid recent vce. adetonadolapo@gmail.com

I want know about the new qu~

first : the new siml ( ospf – eigrp ) trubelshooting only? I mean only I need show ~ and I chose or write command like eigrp modf~3

second : only the new q in sim or anther like drop~ swit~ ip routing

plz answer to me because I will take the exam tomorrow any one can help me to pass i study

.Watson.314q
Matthew.319q
9tut siml

that’s good or i need study anther something

Hi guys, I took the exam today, I passed it successfully with 900 points, Thumbs helped a lot but I studied last 3 days about OSPF and EIGRP and that saved my ass, the EIGRP lab don’t forget to enable eigrp 222 also on router’s1 interface to the network f0/1 . The ACL 2 was easy studiyng it but in person it was difficult and you should know also wildcard mask math otherwise you will fail on this one like I did…. however I passed it and I am prepering my self for LPI Linux, DUMBS UP AND VIVA LA CCNA ! Good luck to everyone !

Passed 1000/1000, OSPF and EIGRP simlets (just show commands), everything else 9tut and watson/edmundo/etc. ACL2 and EIGRP lab.

don pedro

dump Cisco.Certdumps.200-120.v2014-09-29.by.EDMUNDO.313q.vce is good?

Hi guys got 1000 on October 1st yes we get new sim questions OSPF and EIGRP

please see the ICND1/ICND2 Website page of 9tutes (http://www.9tut.net/)

for OSPF t shoot (show run and show ip ospf interface )

show ip ospf interface – hello dead timer difference , area , process id , router id

eigrp – show run show ip protocols
and got 2 new questions Etherchannel – (ans) speed mismatch
advantage of single area ospf – less LSA types , no virtual links needed
100% from the 9tutes address don’t worry
if any help needed j.davidsuthershan@gmail.com

hello dead timer difference , area , process id , router id

is that the answer of the q? or what is that

the thing is machan ,for the new sims you have to find the problems in the NW and these are the problems in that NW

for e.g they will say R1 and R5 can’t make the connection what might be the reason
so you have to go to R1 and R5 show run or show ip ospf int and see both of the hello dead timer are same , areas are same , router id cannot be same just like that u have to see

with show ip ospf interface (interface connecting other asked router) – you can see these details (hello dead timer difference , area , process id , router id)

please go to ICND1/ICND2 Website page of 9tutes (http://www.9tut.net/) you will see machan

plz help? – yes, but missing few questions, add 9tut and u will be fine, plus show commands

Passed today, 958/1000, thanks for all the information provided by 9tut, so help full!!!!
Both OSPF and EIGRP show commands labs.
Acl, acl2 and EIGRP 122 tcp, ip labs.

hey friends can anyone share me the link from where i can download the latest version of
VCE which will support the the current dumps .
Thanks in advance…

hey friends can anyone share me the link from where i can download the latest version of
VCE which will support the the current dumps .
Thanks in advance…

Passed CCNA yesterday 986/1000
labs were acl1, acl2(mod 3), and EIGRP

2 new OSPF and EIGRP labs. One of these labs had an error in it, one of the interfaces was mislabeled. It was labeled s2/1 when it was really s1/1. There is no question about it, but even if the interfaces are labeled you should check the addresses for a match to make sure you are looking at the right interface. Other than that, just know your show commands and the labs are easy enough.

9tut has all the questions. You do not “need new dumps”. Just study what is here and you will pass.

Passed my CCNA this week with 986/1000,
LABS were ACL1,ACL2 Mod 3, two eigrp labs for troubleshooting, rest of theory Qs were from 9tut & watson. Best of luck guys.

@waqar Two eigrp labs you got or 1 ospf 1 eigrp ?

i want to exam ccna and i want to what the for the new questions in labs

please tell me that whether the ? mark works in real CCNA exam incase I forget the actual command to be used……

like show ip ospf ? …… will it show the command lists

plz if anybody know send me in mudar_alfadil@yahoo.com

If u want d latest dumb add me on whatsapp: +2347030954376

Passed today 986/1000! .Studied Todd Lammle Exam essentials and 9 tut .

sandipan machee show ip ospf interface , show run for ospf show run and show protocol for eigrp but 100% ithu matum varathu so Try to learn many show comms

practice questions on:
http://www.ciscovce.com

Just passed the 200-120 with a 903, finished with 45 minutes left. Study 9Tut and you will pass, good luck…………….

Hi, Can anybody send me latest dumps on pkothawade9@gmail.com?

I passed CCNA. Thanks 9tut!!!

All labs and questions from here (my english is very bad)

can anyone send me last VCE programm

can anyone attach the last version of VCE programm or send it to mohammed_hashem@outlook.com

today i am cleared ccna examination………..practical pattern has been changed, some one got 3 practical some may 5.I got 3 practicals….total 51 questions ……if u have 55 question then there will 5 practicals…Don’t worry new 2 practicals are very easy…actually that are not practical but fault finding questions …….. if any query mail me at nirav07bhatt@gmail.com

best of luck :)

which new practicals ..can u tell

are the eigrp and ospf sims are multiple questions only? no complex commands to be configured? when did this 2 sims included in the ccna 200-120? thanks, can anyone also send me some helpful dumps, i already have gillbeast and watsons dump? many thanks to you guys
boysweetpotato@gmail.com

I have cleared the 200-120 test with 903 score.

Hello Everyone :D

As a part of giving back the favor to this great site, today I’m going to give you the conclusion (Summary) of CCNA.

https://www.dropbox.com/sh/c4ttc4jxvycdjjr/AACEAAJpZJmC44THBqlSDHiKa?dl=0

If you want to pass the exam in less than a month with a score >900, and you have a small background about networking, then my link is your “HERO” ;D

[The link contains a CCNA file which includes Watson Actual.Test Dump and the Labs that come in the exam (What is the meaning and Watson, and what are the labs?

All that and more is explained in details in the link that contains my CCNA file.

My CCNA file in the link also contains a network simulator program called Packet Tracer which allows you to create a network just the same as you are in a real one.

Finally, the link has a simulator exam program VCE Simulator which puts you as you are in the real exam]

All the best and I hope that everyone of u will get the CCNA certificate ;D :D

At the end, if you need any help, please feel free to contact me at
m_abbass@Live.com

My whatsapp number if needed

+966548474761

Cleared CCNA in last week of sept 2014,All questions were from 9tut.Best of luck guys

@vic: two practical(EIGRP & OSPF) is given and they ask 4 question on that …u have to find fault by checking configration….. remember this is not necesary that everyone get this two extra questions…

That was tough. I was a previous CCNA that let my cert expire. I knew a lot of things had changed, but I took it down to the wire with just a couple of minutes left. I wish I could give advice but due to NDA I will only state study, study, study. If I didn’t do this for a living I probably wouldn’t have passed.

how can i register for ccna exam?
how can i pay US$ 295?
pls help me…

Thanks a lot 9tut team, I cleared my exam today, all are form 9tut and I got EIGRP and AS1 and AS2 Simulation

Passed it today with a 972 Score !! Don’t worry guys … Study well the concepts, 9tut, practice sims and you will do fine !!

Thanks 9tut … All the best !!

Can anyone tell, nat and vtp lab will be in exam, please?