CCNA – Drag and Drop 4
Here you will find answers to CCNA Drag and Drop Questions – Part 4
Question 1
Drag the function on the left to the matching security appliance or application on the right. (Not all functions are used)
Answer:
1) antispyware: detects software designed to capture sensitive information and removes it from the computer
2) antivirus: prevents known malicious programs from being installed on workstations
3) IDS: identifies malicious network traffic and alerts network personnel
4) firewall: filters traffic based on source and destination IP address or traffic type
Question 2
Drag the Frame Relay acronym on the left to match its definition on the right. (Not all acronyms are used)
Answer:
1) a router is this type of device: DTE
2) the most common type of virtual circuit: PVC
3) provides status messages between DTE and DCE devices: LMI
4) identifies the virtual connection between the DTE and the switch: DLCI
Question 3
The left describes some types of connections while the right describes some types of cables. Drag the items on the left to the proper locations.
Answer:
Explanation:
To specify when we use crossover cable or straight-through cable, we should remember:
Group 1: Router, Host(PC), Server
Group 2: Hub, Switch
One device in group 1 + One device in group 2: use straight-through cable
Two devices in the same group: use crossover cable
For example: we use straight-through cable to connect switch to router, switch to host, hub to host, hub to server… and we use crossover cable to connect switch to switch, switch to hub, router to router, host to host… ).
+ We can connect a modem to router auxiliary port using a rollover cable. Recall that the purpose of the router’s auxiliary port is for connecting to a modem and most Cisco routers have a second port on the back called the auxiliary port. We can use this port in case of a far-away router goes down, the administrator can have someone in the area go to the router, plug in a modem and access to the router remotely (if using the console port, we have to go to the site to work with that router).
+ We can connect a PC serial port to a switch/router console port through the RJ-45 to DB-9 or RJ-45 to DB-25 adapter (at the PC end), depending on the computer.
Question 4
The above provides some descriptions, while the below provides some routing protocols. Drag the above items to the proper locations.
Answer:
Explanation:
Enhanced Interior Gateway Routing Protocol (EIGRP) is a Cisco proprietary routing protocol, so it is vendor-specific. By default, EIGRP internal routes have an administrative distance value of 90.
OSPF uses cost as its metric. By default, the cost of an interface is calculated based on bandwidth with the formula cost= 10000 0000/bandwith (in bps). OSPF elects a DR on each broadcast and nonbroadcast multiaccess networks (like Ethernet and Frame Relay environments, respectively). It doesn’t elect a DR on point-to-point link (like a serial WAN).
Question 5
As a CCNA candidate, you are required to have a firm understanding of the OSI model. At which layers of the OSI model do Wide Area Networks operate in? Please drag the items to the proper locations.
Answer:
Explanation
WAN operates in the two lowest layers which are Data Link and Physical layers.
Taking the ccna on June 02,2012..guys please send me latest dump to tjayasiri@gmail.com
Thanks
hi 9tut
Q3 >> pc serial port switch console port >> should be use serial cable not rollover cable?
thax
I passed my ccna exam today Praise be to God! Thank you Jesus! and thanks to 9TUT for the tutorials and explanations, great site and thanks to xallax for your explanations to questions and thanks to http://www.examcollection.com for the dumps. Pls guys lets donate and help to keep this site up!
48 ques for exams including 3 simulation, I had EIGRP, Acesslist2 and VTP. Ques 1 and 5 were on exam,Make sure you practice the simulation, use packet tracer or gns3. Best wishes to all! For EIGRP and Acesslist2 DO NOT FORGET TO SAVE THE CONFIGURATION IN THE EXAM!
hello again james if you are still in need of them i think this is there web address
and some info , they have a deal on at the mo ,just say kemsy told you to ring
CCNA DRAG AND DROP QUESTION:
ADVANTAGE AND DISADVANTAGE of POINT TO POINT, CIRCUIT SWITCHED and PACKET SWITCHED
bandwidth, quality, delay, more flexibility, low speed, more complex, load, cost, limited flexibility, efficient
PLEASE HELP!!
Q3
we can’t connect a modem to router auxiliary port using a rollover cable !!!!!
check plzzz
Hi yassine,
recording to description which is under the answer for you question (see upper part of this page where the question is….
We can connect a modem to router auxiliary port using a rollover cable. Recall that the purpose of the router’s auxiliary port is for connecting to a modem and most Cisco routers have a second port on the back called the auxiliary port. We can use this port in case of a far-away router goes down, the administrator can have someone in the area go to the router, plug in a modem and access to the router remotely (if using the console port, we have to go to the site to work with that router).
Hi All,
can you tell me am I wrong, please?
Question 1 / drag na drop / top part of this page
http://www.9tut.com/ccna-drag-and-drop-4
Are you sure that IDS is matching “identifies malicious network traffic and alerts network personnel”? Is it really IDS description? I think it is IPS. In my opinion “ids” is only detecting malicious data but “ips” is detecting and alert.
Please correct me if I am wrong,please?
@Layer13
Passed today with 1000/1000, got this drag and drop. Everything is right from 9tut
Hi Mike,
Congratulations on achieving CCNA Certification, Please let us know about simulations and questions that came in your exam.
qrazad@yahoo.com
Regards,
congrats guys!
Hi Mike,
Congrats,Can you tell me how did you prepare for exam,which dumps you used.
If possible ,can you send me at ccent106@gmail.com
Hi Ayeesha,
Please use below dump.!!
http://www.examcollection.com/cisco/Cisco.ActualTests.640-802.v2012-07-15.by.Sekhar.697q.vce.file.html
Hi Kinz,
Can you give me dumps for CCENT,Because that one is for CCNA.
ccent106@gmail.com
Hi!
Can anyone verify the answer from Q2, on which
3) provides status messages between DTE and DCE devices: LMI or DLCI ?
4) identifies the virtual connection between the DTE and the switch: DLCI or LMI ?
I am confused to this..
Thanks!
9tut? xallax? ccnaguy?
Anyone can give me some information/explanation for the said question# 2?
3) provides status messages between DTE and DCE devices: the answer should be LMI or DLCI ?
4) identifies the virtual connection between the DTE and the switch: the answer should be DLCI or LMI ?
thanks!
9tut? xallax? ccnaguy?
@roger
3) LMI does the link part, DLCI is just an address (“connection identifier”).
4) DLCI helps you identify which VC is which.
learn the acronyms. it helps a lot.
dlci = data-link CONNECTION IDENTIFIER (the name says it all – connection identifier)
lmi = LINK management interface (takes care of the link)
Thanks xallax for a very informative answer….
DID IT!!…907…thx 9tut!!!!..CCNA certified….tons of questions from this site…read from top to bottom every question, because you will not know what pops up…q1, 3,on exam….good luck to all…can’t stress enough…read EVERY question on this site…
tnx xallax for a very nice n short explanation……….
Tomorrow will take the test, wish me luck!!!
Have a cool thanksgiving day
J
passed ccna exam this morning, thanks 9tut, question 1 came out
TY 9tut.
Today I have passed the CCNA. (860/825)
50 questions 3 labs (VTP, EIGRP, ACL). 35 from 9tut.
Also thanks a lot Brar and Sekhar (still valid from examcollection)
Ty again 9tut
from here Q 1
passed ccna on dec 18..
Qn 1 came as drag and drop..
je vais repasser le ccna dans les prochains jours, svp si vous pouvez me communiquer toutes les informations necessaires et les labs et les questions et tout ce qui va me permettre pour le reussir. je vous remercie beaucoup et bravo pour ce site.
Voila mon mail: bentikrane2012@gmail.com
I am giving ccna exam next month,will this be valid for that time,plz plz tell me
Wow Guys, today i passed the exam with 1000/1000, the simulations were great and everything with 9tut is okay
wish luck for all of you
If need for materials you can contact me
skype: ccnp.elyas
s.bayes.h@gmail.com
+93 796 23 22 88
Hi Syed kindly share the latest updates in exam i am writing exam on 28th Jan.
Making buttermilk pancakes from laptops with trial versions of anti-virus programs.
Valid Que :D
Q:1
Everything that javascript or visualforce as needed.
Passed CCNA, question 1 from here.
Q 1 was in my exam
Question 1 on CCNA 2nd try today
Question 1 was in my today exam.
Q2 was on ICND2
@Xallax
hello man ! if you run any blog for ccna please inform,i want to gain more knowledge of yours,advance thanks……
@satheesh
http://www.ciscovce.com is my website.
i dont run any blogs as my time is just too short
Q1 on today’s exam
Q1 in today exam
I am going to appear my CCNA exam next week. Can anyone please share the latest dumps with me. my id is: manoj.ray34@gmail.com , Thanks all in advance.
what is dmz device
All questions here valid.
Pliz i will sit for the exam next month, can someone send me the latest dumps on email: olesimbe@yahoo.com
Q1 came to my exam today.
Just wrote my exam today had 933/1000, thanx to 9 tut and to God. quest 1 in exam today
q1 in exam today
hello guys, i do expct to sit for my CCNA exam on the coming week, can anyone email me the latest version of paa$sure dumps? My Email- janfloriemutta@gmail.com
Hey guys, is the sequence also important in Drag and Drop questions????? Like, let say in question 5 on this page, if I answer: Physical, Data link, then will it be accepted or not. Logically it should be but in the practice test which i did on VCE software, it gave me wrong answer. Please comment abouut it. I am going to give exam next week.