CCNA Drag and Drop SIM Question
Question
You have been hired by Specialty Hardware Incorporated to document the layout of the network. Complete the following tasks: Complete the network topology shown in the graphic by dragging the labels below with the appropriate router types, interface types, and IP addresses to the graphic . Find the information you need by using the router console attached to the R-CENTER router.
Answer and explanation
Note: You can download this sim to practice here: http://www.9tut.com/download/9tut.com_CCNA_drag_and_drop_sim_question.pkt
This is the simplest lab question in four labs you see in the real CCNA exam. First we should identify the types of these routers by using the show cdp neighbors command:
There are 3 columns we should pay more attention to:
+ Local Interface: the interface on the device you are using “show cdp neighbors” command. In this case it is the interface of R-CENTER router
+ Platform: the platform of neighbor device
+ Port ID: the neighbor device’s port or interface on which the CDP packets are multicast
From the exhibit, the “Local Interface”, “Platform” and “Port ID” columns, we can identify where these four routers should be placed and their corresponding associated ports
Finally, use the show running-config command to find out the ip addresses of four interfaces on R-CENTER
And we can easily assign corresponding ip addresses to four neighbor routers, which are on the same network with R-CENTER router’s interfaces
Please remember in the real CCNA Exam the routers’ types, ip addresses and interfaces may be different! So make sure you understand how it works.
Other lab-sims on this site:
CCNA Configuration SIM Question (RIPv2 SIM)
To sit for the ccna exam next month and i real need dumps pliz anyone with,send to email:olesimbe@yahoo.com. Thanks a lot!!.
:) :)
Really great website……
Hi , if any one want these materials :
1- CCNA Labs for the real world which is include:
6 phase Files (each phase include :PDF Scenario with Objectives ), GNS3(topology.net , Answer file) you should be fameliar with
.net file because when you download the files , maybe you need to change the image to the image that you have ( 10 $)
2- CCNP Examples which is include 9 files , each file include : PDF Example Scenario , Gns3 (Topology.net , Answe File ) (10 $)
3- CCNP CBT Nuggets (Route 50 $)( Switch 50 $)
Contact me on : hassanzuhair58@yahoo.com
The most simple is to be familiar with th (router#show cdp neighbors detail)
You have all information about all. But for 9tut to simplify the show in the windows he used the show cdp beighbors simply.
Good luck
Hi there could someone please send me latest exam dumps Ccna i appriciated your help
My email: ahmedfaaf@hotmail.co.uk
Hi there could someone please send me latest exam dumps Ccna i appriciated your help.]
flaviomelo25@msn.com
I will pass the CCNA exam tomorrow!! ….. Thank you Lord…
so easy :)
hi please any1 is there to help me … can ny1 send me the recent dumps?? i will b so greatful :) thanks… my mail id is:- rinjurajan90@gmail.com
Hi frnds I have passed CCNA.
Thanks 9tut for ur help.
Thanks alot
Guys Just Refer to the 9tut Questions. And No need for other dumps. with simulations and drag and drops
and its enough
no need to run sh run
sh ip int brief
revelas all IP address :)
Thanks heaps though
tomorrow taking this exam and preparing …..
please send me the recent ccna exam qns papers i am preparing for it :)
do you want to write your CISCO, ORACLE,ITIL EXAM, come write it in our office in Nigeria at Font-IT 162 Ikorodu road, onipanu lagos or call 08037550385.
HI,
Come this simulation in the ccna 200-120 exam, please send a short info thank you ?
Hello guy`s if is just a question if you practice well with this lab is it the same thing you are going to meet in the real exam pls help because my days are limited
You can not assume that remote destinations will use the next ip address. Therefore you should use
show cdp neighbors detail
I am taking my exam on 21 August 13.
guys this is the best way to figure it out
R3#show cdp neighbors
Capability Codes: R – Router, T – Trans Bridge, B – Source Route Bridge
S – Switch, H – Host, I – IGMP, r – Repeater, P – Phone
Device ID Local Intrfce Holdtme Capability Platform Port ID
Kovi-Switch Fas 0/0 168 S 2960 Fas 0/1
R4 Ser 0/0/0 175 R C1841 Ser 0/0/0
R1 Ser 0/1/0 176 R C1841 Ser 0/1/0
R2 Ser 0/0/1 175 R C1841 Ser 0/0/1
R3#
R3#
R3#
R3#show cdp entry * protocol
Protocol information for Kovi-Switch :
IP Address: 192.168.30.2
—————————
Protocol information for R4 :
IP Address: 100.10.10.10
—————————
Protocol information for R1 :
IP Address: 100.10.10.17
—————————
Protocol information for R2 :
IP Address: 100.10.10.5
i prefer show ip route to show running-config , more compact :D
today is my exam, it is after few hours! I am so nervous! wish me luck! lol
nice lab done on the show cdp command, although you can run the show cdp neighbor details to find out the configured IP address on the remote router instead of guessing it from the show running-config. just a thought. :-))
cleared icnd1 today with 862 marks, this sim was on my test…thanx to 9tut :)
Does the drag and drop is to be answered following order? (where no order is mentioned)
hi there >> could somone sent to me latest exam dumps on c.ronaldo1371993@yahoo.com
Has anyone takin the 802 recently and how were the sims any HELP will be HIGHLY be APPRECIATED qmailer@yahoo.com
Hi All,
I’m preparing for my first ever attempt and will sit for the CCNA exam on next Saturday 21st Sep’13. requesting you (who already appeared) for the general exam tips.
Also have a questions please -
– is there any order to maintain in ‘Drag and Drop’ questions ? cause I’m asking is – got my answer wrong during the test through dump although the options I choose were correct but not in same order as dump. do I really need to ensure the order ?????
Thanks in advance for your reply. you can also email me to ah_chowdhury@yahoo.com
am writing my exam on sato 28th September2013.what are the lab sims in the exam? plz help
Thank you,
I pass the CCNA 640-802 today. 854 scored. I prepared only from 9tut. Wish you Best!
“show cdp neighbor details ” the only command needed for this question. :)
“show cdp neighbors detail” :$
I pass the CCNA 640-802 today 881 scored thanx 9tut
hi,
I m going to seat for the CCNA exams at the end of November.
Please send me the latest dump and Sim lab
my mail id:theused_012@rocketmail.com
i pass ccna exam 6 th sep 2013.but still i didn’t get my certificate.
thanks alot for gied..ccna exam after 6 days and i real need dumps piz anyone with,send to email:rathod.chetan72@gmail.com. Thanks a lot!!.
thanks alot for gied..ccna exam after 6 days and i real need dumps piz anyone with,send to email:rathod.chetan72@gmail.com. Thanks a lot!!.
hiiiiiiiiiiiiii,
all friends and 9tut… plz contect 9099881686(chetan rathod) me. and make goods friend. our field persons………..
IT person from TATA isp.
chetan rathod
download latest dumps from
9
t
u
t
.
c
o
m
x
a
.
c
o
m
Plz send latest CCNA dump (640-802), as i am taking exam on
I am going to write my ccna in next week. can anyone please send the latest 200-120 dumps to singam.s@hcl.com or micky.pavani@gmail.com
download free latest dumps from
9
t
u
t
.
w
e
b
s
.
c
o
m
hi,
I m going to seat for the CCNA exams at the end of this month (Jan)
Please send me the latest dump and Sim lab
my mail id:ravy_chea@yahoo.com.
Thanks you so much for your kind.
Thanks
Hi all
I am going to sit for CCNA tomorrow. Any latest dump for me?
Can email to trichard68@yahoo.com
Thanks.
i need latest dumps, can u help to me
why is Router2514 using e1? should it be fa0/1???
Thanks.
Writing at 12h30 today. I feel prepared.
The lab downloaded from this page seems to be very different from the Answer and Explanation. Is anyone else seeing this?!?
The Platform and Port IDs are different. Everything else is the same. I understand this trivial question but it is a little troubling at first. Especially when three of the routers are PT1000…
Anyone else want to input on this???
R-Center#show cdp neighbors
Capability Codes: R – Router, T – Trans Bridge, B – Source Route Bridge
S – Switch, H – Host, I – IGMP, r – Repeater, P – Phone
Device ID Local Intrfce Holdtme Capability Platform Port ID
Relmap Fas 0/1 128 R PT1000 Fas 0/0
Birmingham Fas 0/0 128 R PT1000 Eth 0/0
Boaz Ser 0/0 134 R PT1000 Ser 0/0
Atlanta Ser 0/1 136 R C2600 Ser 0/1
I am also getting the same output. Not able to figure out the router type with show cdp neighbors command.
Same here……PT1000..
Anyone able to help? Next week is mine exam.