Practice Real CCNA Labs with Packet Tracer Simulator

so wht is the password gr8 work

Thanks for the updated information. I am taking the exam again on the 14th. I failed the first, but have studied pretty hard and used 9tut for reference material.

BTW… Most of this material was on the exam I took three weeks ago…

Thank you very much ;)

thanks so much for this

Thank you so much for this..

Thanks Runiya and also thanks to 9tut!

Big THX for this :- )

pressured, im taking the exam on jan 17…

Can anyone tell me wat are are the simulation i have to prepare for exam…Taking my exam on 14th Jan..

I downloaded the zip file with pft configs. There is an “enable” password attached to some routers. What is the password please ?

hi thanks a lot

Thanks for this, really appreciate the time and effort that has gone into putting these practice labs together.

I did notice on the RIP v2 sim that the clock rate between the serial interfaces had not been set.

If we were presented with a similar situation in the exam would / should we set this item? Even tho the question had not specifically stated so?

The reason i ask is that when i did “show rip database” to make sure my routes were being advertised I was only advertising the Fa0/0 route.

any feedback greatly appreciated

…. also a general query and I always get mixed up on this one… is it the “no auto summary” command that will advertise the subnet mask or simply enabling RIPv2?

i need to write this jan can someone tell
m has the exam changed

No one has answered the question about the enable passwords. Please help us out? Many thanks for the hard work and for sharing with us.

Thank you!!

You have to read the instructions for the questions. The password could be cisco, or another depending on the question.

thanx

9tut and ACME
i pass today ccna 936
labs
VTP , ACL, Eigrp

zulfiqarsoomro@yahoo.com

thanksssssssssssss

i need to write at the mid of February this year!!! pls anyone with a current exam materials???????? my email bebro4@yahoo.com

thanx for the niceFile,, but what i can do with CCNA drag and drop sim??i dont know wt exactly the aim??Can u help me plz??!

Hey guys, m gonna take the CCNA exam in the end of Feb 2011, any one with updated material for helping me to achieve score n to make me certify! HELP?

Thank-you the feedback and a thank you to all those who contribute / update this site.

I have been going over the labs again and again (which is also helping with my theory) and this is boosting my confidence no end.

Once I have passed my exam I will endeavor to contribute material myself

@Rer – I believe, if i have understood the lab correctly, you are meant to use the CDP command. Generally, the lab will either provide instructions or a link to the instructions. in this case in provides the link http://www.9tut.com/65-ccna-drag-and-drop-sim-question – hope this is of some help

on the first question in the VTP sim, sho mac-address table, I am not seeing mac addess in table or am I seeing fa0/8. I am going into en, then sho mac-address table. I’ve re-downloaded the VTP sim, but i am seeing the same thing, plz help..

@aerdaxt: You have to press the button ‘power cycle devices’ that is in the lower yellow bar on packet tracer. This will make the mac addresses appear in the mac address table.

Another question I have about VTP sim is this:

On question 9, in the solution, it says that you must do a show running-config and look for a default gateway route. But on this lab there is no such line in the running config!!

what pass lab drag and drog sim question

why you putt pass in routers

give me all passwords labs

can anyone pls answer dis question. hw often do they review/change CCNA questions

thanks :)

the ip address of web server is 172.22.242.3. n the subnetmask is 255.255.255.240 n default gateway is 172.22.242.30 so the ip n gateway is not in same subnet
change the ip from 172.22.242.3 to 172.22.242.(17-30) in ACL2 lab

In the NAT sim that i downloaded from this site, the commands ip nat inside and ip nat outside haven’t been configured though it said so in the question…

thank you so much.

Anyone know what to fill in on de DHomesb PT Practice SBA exam discovery 1?
I’m stuck on the router config in 3b…

unable to open labs router due to password please share password asap

thanks to Runiya

thanx

Thanks

thanks a lot! what a great help to us.

Please let me know how many simulations questions are there totatlly for CCNA

totatlly for ccna question siimulation is 3

hey i cant view vtp sim on ma packet tracer 5.2.0.0068

want is the password for activity wizard packet tracer

great job Runiya, thanks mate.

thanx alot its help me and hop to get more

im thankful to 9tut for providing ccna best

good job, 9tut thanks a lot

Hello please can someone send me the packet tracer sim for this particular question, have exam on 17th of march. Thanks for helping me out email== markdganish@yahoo.com

Hello !! Any One Could Tell me what m doing mistake .. as i am pplying NAT overload seting to one of my router … ! Private IPs Can Successfully translated to Public IPS .. but in actucal the LAN is not Pinging the Out Side LAN … I.e .. Showing The message : Request Time Out ” … what to do with this prob ?? plx

Great help! Thanks Runiya and 9tut.